Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/hosted_codec.h

54 lines
2 KiB
C
Raw Normal View History

Straighten out the mad twisted state of sound.c and related areas. This is going right in since it's long overdue. If anything is goofed, drop me a line or just tweak it yourself if you know what's wrong. :-) Make HW/SW codec interface more uniform when emulating HW functionality on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to- DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX" APIs are all in sound.c with none in DSP code any longer. Reduce number of settings definitions needed by each codec by providing defaults for common ones like balance, channels and SW tone controls. Remove need for separate SIM code and tables and add virtual codec header for hosted targets. Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
2013-04-13 03:35:47 +00:00
/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2010 by Thomas Martitz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef HOSTED_CODEC_H
#define HOSTED_CODEC_H
Provide high resolution volume and prescaler to hosted targets. HAVE_SW_VOLUME_CONTROL is required and at this time only affects the SDL targets using pcm-sdl.c. Enables balance control in SDL targets, unless mono volume is in use. Compiles software volume control as unbuffered when PCM_SW_VOLUME_UNBUFFERED is defined. This avoids the overhead and extra latency introduced by the double buffer when it is not needed. Use this config when the target's PCM driver is buffered and sufficient latency exists to perform safely the volume scaling. Simulated targets that are double-buffered when made as native targets remain so in the sim in order to run the same code. Change-Id: Ifa77d2d3ae7376c65afecdfc785a084478cb5ffb Reviewed-on: http://gerrit.rockbox.org/457 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org>
2013-04-23 07:20:49 +00:00
#if defined(HAVE_SDL_AUDIO) \
&& !(CONFIG_PLATFORM & PLATFORM_MAEMO5)
AUDIOHW_SETTING(VOLUME, "dB", 0, 1, -80, 0, 0)
#else
Straighten out the mad twisted state of sound.c and related areas. This is going right in since it's long overdue. If anything is goofed, drop me a line or just tweak it yourself if you know what's wrong. :-) Make HW/SW codec interface more uniform when emulating HW functionality on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to- DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX" APIs are all in sound.c with none in DSP code any longer. Reduce number of settings definitions needed by each codec by providing defaults for common ones like balance, channels and SW tone controls. Remove need for separate SIM code and tables and add virtual codec header for hosted targets. Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
2013-04-13 03:35:47 +00:00
#define AUDIOHW_CAPS (MONO_VOL_CAP)
Do some cleanup, adjustment and a couple fixes to recent sound changes. * SOUND_x enum can be generated by audiohw_settings.h along with settings entries and sound_val2phys. * VOLUME_MIN and VOLUME_MAX are no longer necessary within sound.c. If you need them, they are for target-defined purposes. * Fix up SDL volume implementation in sdl.c. Move sim volume calculation code to pcm-sdl.c. * Min trigger tresholds were based upon VOLUME_MIN for some reason. These setting have nothing to do with playback volume. Since it is no longer present, set these at -89dB which is the minimum peak meter sensitivity setting. * Fix an oversight in wm8758.c. I forgot to add the dB->register conversion to audiohw_set_volume. Change-Id: Ie1df33f1793eee75e6793f16bc7bddd16edb7f75
2013-04-20 08:06:13 +00:00
AUDIOHW_SETTING(VOLUME, "dB", 0, 1, -99, 0, 0)
Provide high resolution volume and prescaler to hosted targets. HAVE_SW_VOLUME_CONTROL is required and at this time only affects the SDL targets using pcm-sdl.c. Enables balance control in SDL targets, unless mono volume is in use. Compiles software volume control as unbuffered when PCM_SW_VOLUME_UNBUFFERED is defined. This avoids the overhead and extra latency introduced by the double buffer when it is not needed. Use this config when the target's PCM driver is buffered and sufficient latency exists to perform safely the volume scaling. Simulated targets that are double-buffered when made as native targets remain so in the sim in order to run the same code. Change-Id: Ifa77d2d3ae7376c65afecdfc785a084478cb5ffb Reviewed-on: http://gerrit.rockbox.org/457 Reviewed-by: Michael Sevakis <jethead71@rockbox.org> Tested-by: Michael Sevakis <jethead71@rockbox.org>
2013-04-23 07:20:49 +00:00
#endif /* CONFIG_PLATFORM & PLATFORM_SDL */
Keep fixing 0c7b787 stuff Change-Id: I0678d3307fbcad32156f9f4e0f8b90eed5a20d92
2013-04-15 18:00:48 +00:00
#if (CONFIG_PLATFORM & PLATFORM_ANDROID)
/* Bass and treble tone controls */
#ifdef AUDIOHW_HAVE_BASS
AUDIOHW_SETTING(BASS, "dB", 0, 1, -24, 24, 0)
#endif
#ifdef AUDIOHW_HAVE_TREBLE
AUDIOHW_SETTING(TREBLE, "dB", 0, 1, -24, 24, 0)
#endif
#if defined(HAVE_RECORDING)
AUDIOHW_SETTING(LEFT_GAIN, "dB", 1, 1,-128, 96, 0)
AUDIOHW_SETTING(RIGHT_GAIN, "dB", 1, 1,-128, 96, 0)
AUDIOHW_SETTING(MIC_GAIN, "dB", 1, 1,-128, 108, 16)
#endif
#if defined(AUDIOHW_HAVE_BASS_CUTOFF)
AUDIOHW_SETTING(BASS_CUTOFF, "", 0, 1, 1, 4, 1)
#endif
#if defined(AUDIOHW_HAVE_TREBLE_CUTOFF)
AUDIOHW_SETTING(TREBLE_CUTOFF, "", 0, 1, 1, 4, 1)
#endif
Still at it for 0c7b787. Might be done now. Change-Id: Idf45731dc6554954747f6036dc6dfcd4b63981a1
2013-04-15 18:58:00 +00:00
#endif /* CONFIG_PLATFORM & PLATFORM_ANDROID */
Straighten out the mad twisted state of sound.c and related areas. This is going right in since it's long overdue. If anything is goofed, drop me a line or just tweak it yourself if you know what's wrong. :-) Make HW/SW codec interface more uniform when emulating HW functionality on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to- DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX" APIs are all in sound.c with none in DSP code any longer. Reduce number of settings definitions needed by each codec by providing defaults for common ones like balance, channels and SW tone controls. Remove need for separate SIM code and tables and add virtual codec header for hosted targets. Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
2013-04-13 03:35:47 +00:00
Introducing Targets iBasso DX50 & iBasso DX90 The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port. The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port. Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did was to separate the code for DX50 (&DX90) from the android target. On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it. What else I changed from Ilias sources besides the separation from the target "android": * removed a dirty hack to keep backlight off * changed value battery meter to voltage battery meter * made all plugins compile (named target as "standalone") and added keymaps * i added the graphics for the manual but did not do anything else for the manual yet * minor optimizations known bugs: * timers are slowed donw when playback is active (tinyalsa related?) * some minor bugs Things to do: * The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights. Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go. * All the wiki and manual to build: needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed ./tools/configure select iBasso DX50 or iBasso DX90 make -j apk the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed) the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed) The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary. Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his bitbucket page, using the CWM-OF and his installation script package. Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0 Reviewed-on: http://gerrit.rockbox.org/941 Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw> Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
2014-08-30 11:15:53 +00:00
#endif /* HOSTED_CODEC_H */
Reference in a new issue Copy permalink