rockbox/firmware/target/arm/rk27xx/kernel-rk27xx.c

55 lines
1.7 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2011 by Marcin Bukat
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "kernel.h"
/* rockchip rk27xx driver for the kernel timer */
/* sys timer ISR */
void INT_TIMER0(void)
{
/* clear interrupt */
TMR0CON &= ~0x04;
call_tick_tasks(); /* Run through the list of tick tasks */
}
/* this assumes 50MHz APB bus frequency */
void tick_start(unsigned int interval_in_ms)
{
unsigned int cycles = 50000 * interval_in_ms;
/* enable timer clock */
SCU_CLKCFG &= ~CLKCFG_TIMER;
/* configure timer0 */
TMR0LR = cycles;
TMR0CON = (1<<8) | (1<<7) | (1<<1); /* periodic, 1/1, interrupt enable */
/* unmask timer0 interrupt */
INTC_IMR |= IRQ_ARM_TIMER0;
/* enable timer0 interrupt */
INTC_IECR |= IRQ_ARM_TIMER0;
}