rockbox/utils/hwstub/lib/Makefile

CC=gcc
AR=ar
CFLAGS=-W -Wall -O2 `pkg-config --cflags libusb-1.0` -std=c99 -g -fPIC
LDFLAGS=`pkg-config --libs libusb-1.0` -fPIC
LIB=libhwstub.a
SRC=$(wildcard *.c)
OBJ=$(SRC:.c=.o)

all: $(LIB)

%.o: %.c
	$(CC) $(CFLAGS) -c -o $@ $<

$(LIB): $(OBJ)
	$(AR) rcs $@ $^

clean:
	rm -rf $(OBJ) $(LIB)
imxtools: introduce hwemul The hwemul tool is a small binary blob running on the device that can received commands over USB. It is mainly intended to be loaded using the recory mode and allows to read/write registers, memory, use the OTP device, ... The tool is split into three parts: dev/ contains the actual blob (which handles both imx233 and stmp3700), lib/ contains the communication library and can also use the register description produced by the regtools/ to ease register by name, tools/ contains an interactive tool to send commands to the device when running the blob. Change-Id: Ie8cb32e987f825d8ed750d48071e43415b4dacb3 2012-11-14 11:51:51 +00:00			`CC=gcc`
			`AR=ar`
			CFLAGS=-W -Wall -O2 `pkg-config --cflags libusb-1.0` -std=c99 -g -fPIC
			LDFLAGS=`pkg-config --libs libusb-1.0` -fPIC
hwstub: major improvement in the stub and the tools Fix the stub in many way to correctly detect the STMP family and act upon that. Drop some unused commands and bump version. Rewrite the tool to allows scripting in lua and load the register description from an XML file using the regtools. Introduce a new tool to load and run code using the hwstub (either binary format or Rockbox additive scramble format). Also switch to an optimise version of the memcpy/move/set functions to correctly handle alignement issue (like writing a full word/half-word when possible for registers which is crucial) Change-Id: Id1d5cfe0b1b47e8b43900d32c5cd6eafae6414f6 2013-06-13 00:02:53 +00:00			`LIB=libhwstub.a`
			`SRC=$(wildcard *.c)`
imxtools: introduce hwemul The hwemul tool is a small binary blob running on the device that can received commands over USB. It is mainly intended to be loaded using the recory mode and allows to read/write registers, memory, use the OTP device, ... The tool is split into three parts: dev/ contains the actual blob (which handles both imx233 and stmp3700), lib/ contains the communication library and can also use the register description produced by the regtools/ to ease register by name, tools/ contains an interactive tool to send commands to the device when running the blob. Change-Id: Ie8cb32e987f825d8ed750d48071e43415b4dacb3 2012-11-14 11:51:51 +00:00			`OBJ=$(SRC:.c=.o)`

hwstub: major improvement in the stub and the tools Fix the stub in many way to correctly detect the STMP family and act upon that. Drop some unused commands and bump version. Rewrite the tool to allows scripting in lua and load the register description from an XML file using the regtools. Introduce a new tool to load and run code using the hwstub (either binary format or Rockbox additive scramble format). Also switch to an optimise version of the memcpy/move/set functions to correctly handle alignement issue (like writing a full word/half-word when possible for registers which is crucial) Change-Id: Id1d5cfe0b1b47e8b43900d32c5cd6eafae6414f6 2013-06-13 00:02:53 +00:00			`all: $(LIB)`
imxtools: introduce hwemul The hwemul tool is a small binary blob running on the device that can received commands over USB. It is mainly intended to be loaded using the recory mode and allows to read/write registers, memory, use the OTP device, ... The tool is split into three parts: dev/ contains the actual blob (which handles both imx233 and stmp3700), lib/ contains the communication library and can also use the register description produced by the regtools/ to ease register by name, tools/ contains an interactive tool to send commands to the device when running the blob. Change-Id: Ie8cb32e987f825d8ed750d48071e43415b4dacb3 2012-11-14 11:51:51 +00:00
hwstub: major improvement in the stub and the tools Fix the stub in many way to correctly detect the STMP family and act upon that. Drop some unused commands and bump version. Rewrite the tool to allows scripting in lua and load the register description from an XML file using the regtools. Introduce a new tool to load and run code using the hwstub (either binary format or Rockbox additive scramble format). Also switch to an optimise version of the memcpy/move/set functions to correctly handle alignement issue (like writing a full word/half-word when possible for registers which is crucial) Change-Id: Id1d5cfe0b1b47e8b43900d32c5cd6eafae6414f6 2013-06-13 00:02:53 +00:00			`%.o: %.c`
imxtools: introduce hwemul The hwemul tool is a small binary blob running on the device that can received commands over USB. It is mainly intended to be loaded using the recory mode and allows to read/write registers, memory, use the OTP device, ... The tool is split into three parts: dev/ contains the actual blob (which handles both imx233 and stmp3700), lib/ contains the communication library and can also use the register description produced by the regtools/ to ease register by name, tools/ contains an interactive tool to send commands to the device when running the blob. Change-Id: Ie8cb32e987f825d8ed750d48071e43415b4dacb3 2012-11-14 11:51:51 +00:00			`$(CC) $(CFLAGS) -c -o $@ $<`

			`$(LIB): $(OBJ)`
			`$(AR) rcs $@ $^`

			`clean:`
hwstub: major improvement in the stub and the tools Fix the stub in many way to correctly detect the STMP family and act upon that. Drop some unused commands and bump version. Rewrite the tool to allows scripting in lua and load the register description from an XML file using the regtools. Introduce a new tool to load and run code using the hwstub (either binary format or Rockbox additive scramble format). Also switch to an optimise version of the memcpy/move/set functions to correctly handle alignement issue (like writing a full word/half-word when possible for registers which is crucial) Change-Id: Id1d5cfe0b1b47e8b43900d32c5cd6eafae6414f6 2013-06-13 00:02:53 +00:00			`rm -rf $(OBJ) $(LIB)`
imxtools: introduce hwemul The hwemul tool is a small binary blob running on the device that can received commands over USB. It is mainly intended to be loaded using the recory mode and allows to read/write registers, memory, use the OTP device, ... The tool is split into three parts: dev/ contains the actual blob (which handles both imx233 and stmp3700), lib/ contains the communication library and can also use the register description produced by the regtools/ to ease register by name, tools/ contains an interactive tool to send commands to the device when running the blob. Change-Id: Ie8cb32e987f825d8ed750d48071e43415b4dacb3 2012-11-14 11:51:51 +00:00