rockbox/firmware/target/arm/philips/hdd1630/button-hdd1630.c

197 lines
5.3 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Mark Arigo
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "system.h"
#include "button.h"
#include "backlight.h"
#include "synaptics-mep.h"
#define LOGF_ENABLE
#include "logf.h"
#define MEP_BUTTON_HEADER 0x19
#define MEP_BUTTON_ID 0x9
#define MEP_ABSOLUTE_HEADER 0x0b
static int int_btn = BUTTON_NONE;
/*
* Generate a click sound from the player (not in headphones yet)
* TODO: integrate this with the "key click" option
*/
void button_click(void)
{
GPO32_ENABLE |= 0x2000;
GPIOD_OUTPUT_VAL |= 0x8;
udelay(1000);
GPO32_VAL &= ~0x2000;
}
#ifndef BOOTLOADER
static int syn_status = 0;
void button_init_device(void)
{
/* enable touchpad */
GPO32_ENABLE |= 0x80;
GPO32_VAL &= ~0x80;
udelay(1000);
/* enable ACK, CLK, DATA lines */
GPIOD_ENABLE |= 0x80;
GPIOA_ENABLE |= (0x10 | 0x20);
GPIOD_OUTPUT_EN |= 0x80; /* ACK */
GPIOD_OUTPUT_VAL |= 0x80; /* high */
GPIOA_OUTPUT_EN &= ~0x20; /* CLK */
GPIOA_OUTPUT_EN |= 0x10; /* DATA */
GPIOA_OUTPUT_VAL |= 0x10; /* high */
if (syn_init())
{
#ifdef ROCKBOX_HAS_LOGF
syn_info();
#endif
syn_status = 1;
/* enable interrupts */
GPIOA_INT_LEV &= ~0x20;
GPIOA_INT_CLR |= 0x20;
GPIOA_INT_EN |= 0x20;
CPU_INT_EN |= HI_MASK;
CPU_HI_INT_EN |= GPIO0_MASK;
}
}
/*
* Button interrupt handler
*/
void button_int(void)
{
int data[4];
int val, id;
int_btn = BUTTON_NONE;
if (syn_status)
{
/* disable interrupt while we read the touchpad */
GPIOA_INT_EN &= ~0x20;
GPIOA_INT_CLR |= 0x20;
val = syn_read_device(data, 4);
if (val > 0)
{
val = data[0] & 0xff; /* packet header */
id = (data[1] >> 4) & 0xf; /* packet id */
logf("button_read_device...");
logf(" data[0] = 0x%08x", data[0]);
logf(" data[1] = 0x%08x", data[1]);
logf(" data[2] = 0x%08x", data[2]);
logf(" data[3] = 0x%08x", data[3]);
if ((val == MEP_BUTTON_HEADER) && (id == MEP_BUTTON_ID))
{
/* Buttons packet */
if (data[1] & 0x1)
int_btn |= BUTTON_LEFT;
if (data[1] & 0x2)
int_btn |= BUTTON_RIGHT;
/* An Absolute packet should follow which we ignore */
val = syn_read_device(data, 4);
logf(" int_btn = 0x%04x", int_btn);
}
else if (val == MEP_ABSOLUTE_HEADER)
{
/* Absolute packet - the finger is on the vertical strip.
Position ranges from 1-4095, with 1 at the bottom. */
val = ((data[1] >> 4) << 8) | data[2]; /* position */
logf(" pos %d", val);
logf(" z %d", data[3]);
logf(" finger %d", data[1] & 0x1);
logf(" gesture %d", data[1] & 0x2);
logf(" RelPosVld %d", data[1] & 0x4);
if(data[1] & 0x1) /* if finger on touch strip */
{
if ((val > 0) && (val <= 1365))
int_btn |= BUTTON_DOWN;
else if ((val > 1365) && (val <= 2730))
int_btn |= BUTTON_SELECT;
else if ((val > 2730) && (val <= 4095))
int_btn |= BUTTON_UP;
}
}
}
/* re-enable interrupts */
GPIOA_INT_LEV &= ~0x20;
GPIOA_INT_EN |= 0x20;
}
}
#else
void button_init_device(void){}
#endif /* bootloader */
bool button_hold(void)
{
return !(GPIOJ_INPUT_VAL & 0x8);
}
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
static int btn_old = BUTTON_NONE;
int btn = int_btn;
/* Hold */
if(button_hold())
return BUTTON_NONE;
/* Device buttons */
if (!(GPIOA_INPUT_VAL & 0x01)) btn |= BUTTON_MENU;
if (!(GPIOA_INPUT_VAL & 0x02)) btn |= BUTTON_VOL_UP;
if (!(GPIOA_INPUT_VAL & 0x04)) btn |= BUTTON_VOL_DOWN;
if (!(GPIOA_INPUT_VAL & 0x08)) btn |= BUTTON_VIEW;
if (!(GPIOD_INPUT_VAL & 0x20)) btn |= BUTTON_PLAYLIST;
if (!(GPIOD_INPUT_VAL & 0x40)) btn |= BUTTON_POWER;
if ((btn != btn_old) && (btn != BUTTON_NONE))
button_click();
btn_old = btn;
return btn;
}
bool headphones_inserted(void)
{
return (GPIOE_INPUT_VAL & 0x80) ? true : false;
}