rockbox/firmware/target/arm/as3525/kernel-as3525.c

59 lines
1.9 KiB
C
Raw Normal View History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright <EFBFBD> 2008 Rafa<EFBFBD>l Carr<EFBFBD>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "kernel.h"
#include "panic.h"
#include "timer-target.h"
void INT_TIMER2(void)
{
call_tick_tasks(); /* Run through the list of tick tasks */
TIMER2_INTCLR = 0; /* clear interrupt */
}
void tick_start(unsigned int interval_in_ms)
{
int phi = 0; /* prescaler bits */
int prescale = 1;
int cycles = TIMER_FREQ / 1000 * interval_in_ms;
while(cycles > 0x10000)
{
phi++;
prescale <<= 4;
cycles >>= 4;
}
if(prescale > 256)
panicf("%s : interval too big", __func__);
CGU_PERI |= CGU_TIMER2_CLOCK_ENABLE; /* enable peripheral */
VIC_INT_ENABLE = INTERRUPT_TIMER2; /* enable interrupt */
TIMER2_LOAD = TIMER2_BGLOAD = cycles; /* timer period */
/* /!\ bit 4 (reserved) must not be modified
* periodic mode, interrupt enabled, 16 bits counter */
TIMER2_CONTROL = (TIMER2_CONTROL & (1<<4)) | 0xe0 | (phi<<2);
}