rockbox/firmware/target/arm/tcc77x/logikdax/button-logikdax.c
Dave Chapman a4d48d0c0d Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-11-01 23:38:57 +00:00

98 lines
2.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Dave Chapman
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "button.h"
#include "adc.h"
/*
Results of button testing:
HOLD: GPIOA & 0x0002 (0=pressed, 0x0002 = released)
POWER: GPIOA & 0x8000 (0=pressed, 0x8000 = released)
ADC[0]: (approx values)
RIGHT - 0x37
LEFT - 0x7f
JOYSTICK PRESS - 0xc7
UP - 0x11e
DOWN - 0x184
MODE - 0x1f0/0x1ff
PRESET - 0x268/0x269
REC - 0x2dd
Values of ADC[0] tested in OF disassembly: 0x50, 0x96, 0xdc, 0x208, 0x384
*/
void button_init_device(void)
{
/* Nothing to do */
}
int button_read_device(void)
{
int btn = BUTTON_NONE;
int adc;
adc = adc_read(ADC_BUTTONS);
if (adc < 0x384) {
if (adc < 0x140) {
if (adc < 0x96) {
if (adc < 0x50) {
btn |= BUTTON_RIGHT; /* 0x00..0x4f */
} else {
btn |= BUTTON_LEFT; /* 0x50..0x95 */
}
} else {
if (adc < 0xe0) {
btn |= BUTTON_SELECT; /* 0x96..0xdf */
} else {
btn |= BUTTON_UP; /* 0xe0..0x13f */
}
}
} else {
if (adc < 0x208) {
if (adc < 0x1b0) {
btn |= BUTTON_DOWN; /* 0x140..0x1af */
} else {
btn |= BUTTON_MODE; /* 0x1b0..0x207 */
}
} else {
if (adc < 0x290) {
btn |= BUTTON_PRESET; /* 0x208..0x28f */
} else {
btn |= BUTTON_REC; /* 0x290..0x383 */
}
}
}
}
if (!(GPIOA & 0x2))
btn |= BUTTON_HOLD;
if (!(GPIOA & 0x8000))
btn |= BUTTON_POWERPLAY;
return btn;
}