bad4142ce2
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
263 lines
7.8 KiB
C
263 lines
7.8 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2007 by Karl Kurbjun
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/*
|
|
* This config file is for the M:Robe 500i
|
|
*/
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
#define CONFIG_SDRAM_START 0x00900000
|
|
|
|
#define OLYMPUS_MROBE_500 1
|
|
#define MODEL_NAME "Olympus M:Robe 500i"
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 22
|
|
|
|
/* define this if you use an ATA controller */
|
|
#define CONFIG_STORAGE STORAGE_ATA
|
|
|
|
/*define this if the ATA controller and method of USB access support LBA48 */
|
|
#define HAVE_LBA48
|
|
|
|
/* Define this to add support for ATA DMA */
|
|
//#define HAVE_ATA_DMA
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* define this if you want viewport clipping enabled for safe LCD functions */
|
|
#define HAVE_VIEWPORT_CLIP
|
|
|
|
/* LCD dimensions */
|
|
#define CONFIG_LCD LCD_MROBE500
|
|
|
|
/* These defines are used internal to this header */
|
|
#define _LCD_RES_QVGA 1
|
|
#define _LCD_RES_VGA 2
|
|
#define _LCD_PORTRAIT 1
|
|
#define _LCD_LANDSCAPE 2
|
|
|
|
/* Setup the resolution and orientation */
|
|
#define _RESOLUTION _LCD_RES_VGA
|
|
#define _ORIENTATION _LCD_LANDSCAPE
|
|
|
|
#if _RESOLUTION == _LCD_RES_VGA
|
|
#define LCD_NATIVE_WIDTH 480
|
|
#define LCD_NATIVE_HEIGHT 640
|
|
#else
|
|
#define LCD_NATIVE_WIDTH 240
|
|
#define LCD_NATIVE_HEIGHT 320
|
|
#endif
|
|
|
|
/* choose the lcd orientation. CONFIG_ORIENTATION defined in config.h */
|
|
#if _ORIENTATION == _LCD_PORTRAIT
|
|
/* This is the Portrait setup */
|
|
#define LCD_WIDTH LCD_NATIVE_WIDTH
|
|
#define LCD_HEIGHT LCD_NATIVE_HEIGHT
|
|
#else
|
|
/* Frame buffer stride */
|
|
#define LCD_STRIDEFORMAT VERTICAL_STRIDE
|
|
|
|
/* This is the Landscape setup */
|
|
#define LCD_WIDTH LCD_NATIVE_HEIGHT
|
|
#define LCD_HEIGHT LCD_NATIVE_WIDTH
|
|
#endif
|
|
|
|
#define LCD_DEPTH 16 /* 65k colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
#define MAX_ICON_HEIGHT 35
|
|
#define MAX_ICON_WIDTH 35
|
|
|
|
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
|
|
should be defined as well. */
|
|
#define HAVE_LCD_SLEEP
|
|
#define HAVE_LCD_SLEEP_SETTING
|
|
|
|
/* remote LCD */
|
|
#define HAVE_REMOTE_LCD
|
|
#define LCD_REMOTE_WIDTH 79
|
|
#define LCD_REMOTE_HEIGHT 16
|
|
#define LCD_REMOTE_DEPTH 1
|
|
|
|
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
|
|
#define LCD_REMOTE_DARKCOLOR 0x000000
|
|
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
|
|
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
|
|
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
|
|
|
|
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
|
|
|
|
#define CONFIG_REMOTE_KEYPAD MROBE_REMOTE
|
|
|
|
#define MIN_REMOTE_CONTRAST_SETTING 0
|
|
#define MAX_REMOTE_CONTRAST_SETTING 15
|
|
#define DEFAULT_REMOTE_CONTRAST_SETTING 7
|
|
|
|
#define CONFIG_KEYPAD MROBE500_PAD
|
|
#define HAVE_TOUCHSCREEN
|
|
#define HAVE_BUTTON_DATA
|
|
|
|
/* Define this to enable morse code input */
|
|
#define HAVE_MORSE_INPUT
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
//#define HAVE_HARDWARE_BEEP
|
|
|
|
/* There is no hardware tone control */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
|
|
/* define this if you have a real-time clock */
|
|
#define CONFIG_RTC RTC_RX5X348AB
|
|
|
|
/* define this if you have a disk storage, i.e. something
|
|
that needs spinups and can cause skips when shaked */
|
|
#define HAVE_DISK_STORAGE
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 0
|
|
#define MAX_BRIGHTNESS_SETTING 127
|
|
#define DEFAULT_BRIGHTNESS_SETTING 85 /* OF "full brightness" */
|
|
#define DEFAULT_DIMNESS_SETTING 22 /* OF "most dim" */
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x100000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#if LCD_NATIVE_WIDTH < 480
|
|
#define PLUGIN_BUFFER_SIZE 0x100000
|
|
#else
|
|
/* THe larger screen needs larger bitmaps in plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x200000
|
|
#endif
|
|
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 1000 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 2000 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 100 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* define current usage levels */
|
|
#define CURRENT_NORMAL 100 /* Measured */
|
|
#define CURRENT_BACKLIGHT 100 /* Over 200 mA total measured when on */
|
|
#define CURRENT_RECORD 0 /* no recording */
|
|
|
|
/* Hardware controlled charging with monitoring */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
/* Define this if you have a Texas Instruments TSC2100 touch screen */
|
|
#define HAVE_TSC2100
|
|
|
|
/* M66591 register base */
|
|
#define M66591_BASE 0x60000000
|
|
|
|
/* enable these for the usb stack */
|
|
#define CONFIG_USBOTG USBOTG_M66591
|
|
#define USE_ROCKBOX_USB
|
|
|
|
#define HAVE_USBSTACK
|
|
//#define HAVE_USB_POWER
|
|
//#define USBPOWER_BUTTON BUTTON_POWER
|
|
//#define USBPOWER_BTN_IGNORE BUTTON_TOUCH
|
|
/* usb stack and driver settings */
|
|
#define USB_NUM_ENDPOINTS 7
|
|
#define USB_VENDOR_ID 0x07b4
|
|
#define USB_PRODUCT_ID 0x0281
|
|
#define HAVE_USB_HID_MOUSE
|
|
|
|
/* Define this if hardware supports alternate blitting */
|
|
#define HAVE_LCD_MODES LCD_MODE_RGB565 | LCD_MODE_YUV | LCD_MODE_PAL256
|
|
|
|
#define CONFIG_CPU DM320
|
|
|
|
#define CONFIG_I2C I2C_DM320
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
#define HAVE_POWEROFF_WHILE_CHARGING
|
|
|
|
/* The size of the flash ROM */
|
|
#define FLASH_SIZE 0x400000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 87500000
|
|
|
|
/* Define this if you have ATA power-off control */
|
|
#define HAVE_ATA_POWER_OFF
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0
|
|
|
|
/* Offset ( in the firmware file's header ) to the real data */
|
|
#define FIRMWARE_OFFSET_FILE_DATA 8
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
#define HAVE_ADJUSTABLE_CPU_FREQ
|
|
|
|
#define BOOTFILE_EXT "mrobe500"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
|
|
|
|
/* Define this if a programmable hotkey is mapped */
|
|
//#define HAVE_HOTKEY
|