..
archos /av300
Rework ATA driver to get rid of lots of target-specific constants and allow for non-memory-mapped task file registers.
2011-01-02 22:51:47 +00:00
as3525
Sansa clip zip: increase communication speed with the OLED controller
2011-11-19 17:55:21 +00:00
at91sam
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
imx31
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
imx233
imx233/fuze+: set drive strength of tuner chip enable pin, enable backlight on panic
2011-11-17 23:10:22 +00:00
ipod
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
iriver
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
olympus
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
pbell
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
philips
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
pnx0101
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
rk27xx
Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
2011-11-03 11:53:02 +00:00
s3c2440
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
s5l8700
Fix the gpl notice in the previous commits new files, and fix the yelow gevearts naughtily ignored
2011-11-16 10:37:48 +00:00
s5l8702
Bulk convert all DOS line endings to UNIX.
2011-11-06 22:44:25 +00:00
samsung
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
sandisk
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
tatung
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
tcc77x
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
tcc780x
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
2011-11-22 17:34:01 +00:00
tms320dm320
Fix battery meter on Sansa Connect.
2011-11-24 18:55:11 +00:00
adc-as3514.c
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
ata-as-arm.S
ata-nand-telechips.c
GSoC/Buflib: Add buflib memory alocator to the core.
2011-08-30 14:01:33 +00:00
ata-pp5002.c
ata-pp5020.c
Fix or at least significantly improve FS#11830. With introduction of ATA DMA for PP502x a special treatment of the IDE0_CFG register for the iPod nano (see FS#7510) was lost.
2011-01-21 23:32:57 +00:00
ata-sd-pp.c
All kernel objects in code shared amongs targets (core, plugins, codecs) should be declared SHAREDBSS_ATTR as any core could potentially touch them even though they seem only to involve threads on one core. The exception is target code for particular CPUs where proper allocation is fixed. playlist.c was a little odd too-- use one mutex for the current playlist and a separate one for created playlists (still pondering the necessity of more than one).
2011-02-14 11:27:45 +00:00
ata-target.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
audio-pp.c
bits-armv4.S
Add ARMv4 16-bit(set, mod, clr) operations used on DM320.
2011-02-06 19:43:45 +00:00
bits-armv6.S
boot-pp502x-bl-usb.lds
e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.
2011-01-16 01:40:15 +00:00
crt0-pp-bl.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
crt0-pp.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
crt0-pp502x-bl-usb.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
crt0.S
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
debug-pp.c
ipod nano 1g: enable readout of battery current through ADC channel 4066_ISTAT
2011-07-24 17:32:50 +00:00
debug-target.h
Move dbg_hw_info() into target tree. FS#11735 by me
2011-06-05 10:26:06 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
i2s-pp.c
kernel-pp.c
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
lcd-as-memframe.S
lcd-c200_c200v2.c
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h
Rename cache coherency functions.
2010-09-08 17:05:49 +00:00
mmu-arm.S
imx233/fuze+: prepare target to enable MMU
2011-07-23 11:45:18 +00:00
mmu-armv6.S
Fix beast, forgot the asm label when renaming.
2010-09-09 17:00:50 +00:00
pcm-mixer-armv4.c
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm-mixer-armv5.c
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm-mixer-armv6.c
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm-pp.c
Oops. "void void" doesn't work in C :p.
2011-09-01 12:20:52 +00:00
pcm-telechips.c
Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it.
2011-09-01 12:15:43 +00:00
powermgmt-ascodec.c
Sansa AMSv2: initialise PMU (power management unit), inspired by how the OF does it
2011-09-18 15:33:19 +00:00
sd-pp-target.h
support-arm.S
Fix assembler .size directives. Currently used binutils don't complain, but 2.21.1 treats these as errors.
2011-11-09 19:20:33 +00:00
system-arm.c
Switch to SYS mode on arm FS#12322 by me
2011-10-11 16:06:03 +00:00
system-arm.h
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
2011-03-02 08:49:38 +00:00
system-pp502x.c
Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
2011-01-17 12:24:41 +00:00
system-pp5002.c
Rename cache coherency functions.
2010-09-08 17:05:49 +00:00
system-target.h
Set the default battery capacity for ipod video properly depending on detected RAM size.
2011-07-19 20:48:16 +00:00
thread-arm.c
Changed #warning to a TODO comment.
2011-10-05 14:42:18 +00:00
thread-pp.c
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
2011-02-02 17:43:32 +00:00
timer-pp.c
usb-drv-arc.c
Some iPod Video's need a 2nd call of ub_drv_init() to establish the USB connection. This workaround breaks the USB functionality for other devices. Until there is a proper fix available just use the workaround for iPod Video only. Fixes FS#12324.
2011-10-20 14:48:20 +00:00
usb-fw-pp502x.c
Remove obsolete USB_DETECT_BY_DRV define throughout.
2011-09-14 16:42:43 +00:00
usb-fw-pp5002.c
Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
2011-01-15 08:52:59 +00:00
usb-s3c6400x.c
Rework FS#12310 fix (r30906) for better readability. No functional change.
2011-11-10 10:37:02 +00:00
usb-target.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
usb-tcc.c
wmcodec-pp.c
wmcodec-telechips.c
62f5027650