Michael Sevakis f783617cbc Gigabeat: Audio tweak mishmash - Make sure zero crossing detection times out so the volume always gets updated. Make sure i2s is off at boot and set to proper mode before audio hardware is initialized. Make pausing pcm instant instead of waiting until the end of the current DMA transfer. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13706 a1c6a512-1295-4272-9138-f99709370657		2007-06-24 20:41:27 +00:00
..
archos/av300	Start of work on a port to the Archos 'AV300' (AV320/340/380) - a working UI simulator (but with a dummy background image for now) and the beginnings of the target-specific firmare code. Port is temporarily using a 2bpp LCD buffer format - the AV300 has a 320x240 colour (YCbCr-based) LCD which will need a new framebuffer format and drawing routines, but the LCD is also capable of various paletted bitmap modes, one of which has an identical framebuffer format to the greyscale ipods. Buttons (and hence the button mappings) are identical to the Archos Recorder, with the exception that the PLAY button on the Recorder is replaced by pressing the joystick on the AV300 (which I call BUTTON_SELECT). The initial port will begin by being strictly HWCODEC, but will evolve to be a hybrid SWCODEC/HWCODEC platform - it has a MAS3587F but also a main CPU (54MHz arm7tdmi plus DSP) capable of software decoding of at least some formats.	2007-01-14 13:48:09 +00:00
ipod	Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.	2007-04-12 22:12:13 +00:00
iriver	move the iriver ifp7xx and other pnx0101 related files together in the target tree	2007-04-19 10:14:55 +00:00
pnx0101	move to target tree	2007-04-19 10:20:54 +00:00
s3c2440/gigabeat-fx	Gigabeat: Audio tweak mishmash - Make sure zero crossing detection times out so the volume always gets updated. Make sure i2s is off at boot and set to proper mode before audio hardware is initialized. Make pausing pcm instant instead of waiting until the end of the current DMA transfer.	2007-06-24 20:41:27 +00:00
sandisk/sansa-e200	PP5024 (e200): There's more than one HI IRQ bit for enabling GPIO IRQs. Port A uses bit 32 and port F,H use bit 33. Please add futher GPIOx_IRQ/MASK defines and associations to pp5024.h as they are discovered. I guess the SD card patch will need a small update to properly detect insertion.	2007-06-17 00:07:23 +00:00
tatung/tpj1022	Moved archos backlight code to target tree. Changed old mutlivalue CONFIG_BACKLIGHT to a simple HAVE_BACKLIGHT.	2007-04-12 22:12:13 +00:00
ata-as-arm.S	Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation.	2007-01-24 00:12:08 +00:00
ata-pp5002.c	put back the PP5002 specific ATA code that got lost during the ipod target tree move	2006-11-08 12:34:21 +00:00
ata-pp5020.c	Some more replacing of inl/outl with register #define's (doesn't change end-result binary). Add lots more #define's based on the ipodlinux wiki and some extrapolation.	2007-03-03 23:37:17 +00:00
ata-target.h	Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation.	2007-01-24 00:12:08 +00:00
audio-pp.c	Straighten out some audio path APIs and misc. audio stuff. Having recording is not a prerequisite to having input/output source selection which is probably most useful when adding a audio input features like FM to a new port without forcing recording to be implemented first.	2007-06-08 23:42:04 +00:00
crt0-pp-bl.S	Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works.	2006-12-19 11:33:53 +00:00
crt0-pp.S	FS#5472 add a memory size prompt to configure to allow ipod video builds for	2007-05-19 14:35:11 +00:00
crt0.S	Gigabeat: Get rid of the obsolete FIQ wrapper (not used on PP anymore FIY, but no change there). Use the FIQ stack for DMA address and size variables instead of globals.	2007-05-03 12:39:36 +00:00
i2c-pp.c	Change i2c config on e200. Seems to speed things up somewhat.	2007-05-17 22:49:27 +00:00
i2s-pp.c	e200: Use 16-16 L-R pairs when writing to the TX FIFO. Kill the channel swapping and clicks. Reduce number of FIQs. Should be adaptable to iPods and other PP targets in a few minutes work, eh?	2007-05-22 15:34:24 +00:00
memcpy-arm.S	ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G	2007-01-13 23:57:14 +00:00
memmove-arm.S	ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G	2007-01-13 23:57:14 +00:00
memset-arm.S	Removed executable flag	2007-01-09 23:29:07 +00:00
memset16-arm.S	Removed executable flag	2007-01-09 23:29:07 +00:00
memswap128-arm.S	SWCODEC: Get rid of extra swap buffer and get back 512K of RAM or 100K if the players RAM is <= 1MB. Make any needed changes to things to stabilize and facilitate this including removing flattening out initialization. Comment some things heavily. Fix a few logfs I didn't want to see the compiler complaining about.	2007-03-19 22:04:17 +00:00
pcm-pp.c	Accept FS#7178 - Sansa e200 FM tuner support by Ivan Zupan. Do the needed integration work into recording and the AS3514 audio driver. Do a little AS3514 fiq_record tweak to have it all work nicely from the start.	2007-06-06 19:23:48 +00:00
system-arm.h	Gigabeat: Separate driver for audio codec. Tweak pcm driver to comply with intended interface.	2007-05-02 22:33:24 +00:00
system-pp502x.c	PP5024 (e200): There's more than one HI IRQ bit for enabling GPIO IRQs. Port A uses bit 32 and port F,H use bit 33. Please add futher GPIOx_IRQ/MASK defines and associations to pp5024.h as they are discovered. I guess the SD card patch will need a small update to properly detect insertion.	2007-06-17 00:07:23 +00:00
system-pp5002.c	Don't need all those #include's.	2007-04-22 12:44:45 +00:00
system-target.h	Heh. Better way to load the PROCESSOR_ID address. Thanks Thom. :)	2007-04-14 11:46:05 +00:00
usb-pp.c	build with -Wundef to make sure we have spelled the defines right in #if lines	2007-02-17 21:54:17 +00:00
usb-target.h	Fix USB detection on ipods and other portalplayer targets - Rockbox now correctly distinguishes between a USB connection to a computer and a connection to a USB AC charger. Based on the experimental USB code in FS #6494 by Barry Wardell. Closes FS #4724.	2007-02-04 21:46:01 +00:00
wmcodec-pp.c	Reenable aynchronous audio init stage. Really just single stage with aynchronous enabling of outputs. Keeps audio_init last so prior init steps can use the audiobuffer in any desired way. Audio will be fully initialized by the time the UI is entered. Playback of voice or audio will be delayed properly until audio hardware is ready.	2007-03-11 05:04:48 +00:00