21a4a87ca2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13573 a1c6a512-1295-4272-9138-f99709370657
158 lines
4.5 KiB
C
158 lines
4.5 KiB
C
/*
|
|
* This config file is for the Sandisk Sansa e200
|
|
*/
|
|
#define TARGET_TREE /* this target is using the target tree system */
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 16
|
|
#define MODEL_NAME "Sandisk Sansa e200"
|
|
|
|
#define HW_SAMPR_CAPS (SAMPR_CAP_44)
|
|
|
|
/* define this if you have recording possibility */
|
|
#define HAVE_RECORDING
|
|
|
|
#define DEFAULT_REC_MIC_GAIN 23
|
|
#define DEFAULT_REC_LEFT_GAIN 23
|
|
#define DEFAULT_REC_RIGHT_GAIN 23
|
|
|
|
#define REC_SAMPR_CAPS (SAMPR_CAP_22)
|
|
#define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */
|
|
#define REC_SAMPR_DEFAULT SAMPR_22
|
|
|
|
/* Define bitmask of input sources - recordable bitmask can be defined
|
|
explicitly if different */
|
|
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
/* Main LCD backlight brightness range and defaults */
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 12
|
|
#define DEFAULT_BRIGHTNESS_SETTING 6
|
|
|
|
/* define this if you have a light associated with the buttons */
|
|
#define HAVE_BUTTON_LIGHT
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you have access to the pitchscreen */
|
|
#define HAVE_PITCHSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* LCD dimensions */
|
|
#define LCD_WIDTH 176
|
|
#define LCD_HEIGHT 220
|
|
#define LCD_DEPTH 16 /* 65536 colours */
|
|
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
|
|
|
|
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
|
|
|
|
#define CONFIG_KEYPAD SANSA_E200_PAD
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
/* There is no hardware tone control */
|
|
#define HAVE_SW_TONE_CONTROLS
|
|
/* The PP5024 has a built-in AustriaMicrosystems AS3514 */
|
|
#define HAVE_AS3514
|
|
|
|
/* define this if you have a real-time clock */
|
|
#ifndef BOOTLOADER
|
|
#define CONFIG_RTC RTC_AS3514
|
|
#endif
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* Some Sansa E200s seem to be FAT16 formatted */
|
|
#define HAVE_FAT16SUPPORT
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x80000
|
|
|
|
#define AB_REPEAT_ENABLE 1
|
|
|
|
/* FM Tuner */
|
|
#define CONFIG_TUNER LV24020LP
|
|
#define HAVE_TUNER_PWR_CTRL
|
|
|
|
/* Define this for LCD backlight available */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
/* Define this if you have a PortalPlayer PP5024 */
|
|
#define CONFIG_CPU PP5024
|
|
|
|
/* Define this if you want to use the PP5024 i2c interface */
|
|
#define CONFIG_I2C I2C_PP5024
|
|
|
|
/* Type of mobile power */
|
|
#define CONFIG_BATTERY BATT_LIION750
|
|
#define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
#define BATTERY_SCALE_FACTOR 5005 /* ADC should read 0x3ff=5.12V */
|
|
|
|
/* Hardware controlled charging? FIXME */
|
|
#define CONFIG_CHARGING CHARGING_SIMPLE
|
|
|
|
/* define this if the hardware can be powered off while charging */
|
|
/* Sansa can't be powered off while charging */
|
|
/* #define HAVE_POWEROFF_WHILE_CHARGING */
|
|
|
|
/* The start address index for ROM builds */
|
|
#define ROM_START 0x00000000
|
|
|
|
/* Define this to the CPU frequency */
|
|
#define CPU_FREQ 75000000
|
|
|
|
/* Type of LCD TODO: hopefully the same as the x5 but check this*/
|
|
#define CONFIG_LCD LCD_X5
|
|
|
|
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
|
|
only used when loading the old format rockbox.e200 file */
|
|
#define FIRMWARE_OFFSET_FILE_CRC 0x0
|
|
#define FIRMWARE_OFFSET_FILE_DATA 0x8
|
|
|
|
/* #define USB_IPODSTYLE */
|
|
|
|
/* USB On-the-go */
|
|
#define CONFIG_USBOTG USBOTG_ARC
|
|
|
|
/* define this if the unit can be powered or charged via USB */
|
|
#define HAVE_USB_POWER
|
|
|
|
/* Virtual LED (icon) */
|
|
#define CONFIG_LED LED_VIRTUAL
|
|
|
|
/* Define this if you have adjustable CPU frequency */
|
|
/*#define HAVE_ADJUSTABLE_CPU_FREQ*/
|
|
|
|
#define MI4_FORMAT
|
|
#define BOOTFILE_EXT "mi4"
|
|
#define BOOTFILE "rockbox." BOOTFILE_EXT
|
|
#define OLD_BOOTFILE "rockbox.e200"
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
#define ICODE_ATTR_TREMOR_NOT_MDCT
|
|
|
|
#endif
|