rockbox/firmware/drivers
2007-06-24 20:41:27 +00:00
..
audio Gigabeat: Audio tweak mishmash - Make sure zero crossing detection times out so the volume always gets updated. Make sure i2s is off at boot and set to proper mode before audio hardware is initialized. Make pausing pcm instant instead of waiting until the end of the current DMA transfer. 2007-06-24 20:41:27 +00:00
rtc Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized. 2007-05-07 19:34:34 +00:00
arcotg_udc.c No functional changes, just reorganising code: 2007-02-16 22:13:21 +00:00
ata.c ATA driver: * Support for drives with large physical sectors and no support for partial access in the firmware (i.e. Toshiba MK8010GAH - iPod G5.5/80GB). Sequential writes with a single 512-byte buffer to that disk are really slow, so this is an intermediate solution that allows to adjust the FAT driver and the file system gradually. * Assume multisectors = 16 if the value reported by the drive is invalid (also MK8010GAH). 2007-05-23 17:51:18 +00:00
ata_flash.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
ata_mmc.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
button.c fix the gigabeat remote button not working when backlight is off and filter first keypress is enabled 2007-05-20 14:03:42 +00:00
dac.c
dac.h
eeprom_24cxx.c FS#6419 - driver for H1x0 series RTC Mod with runtime detection 2007-02-28 13:20:36 +00:00
fat.c Set CONFIG_RTC to 0 for non-RTC targets, and check with #if to profit from -Wundef. No code change. 2007-03-16 23:47:03 +00:00
fmradio.c Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
fmradio_i2c.c New scheduler, with priorities for swcodec platforms. Frequent task 2006-09-16 16:18:11 +00:00
generic_i2c.c Removed executable flag 2007-01-09 23:29:07 +00:00
i2c.c Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
isp1362.c Removed executable flag 2007-01-09 23:29:07 +00:00
lcd-1bit-vert.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
lcd-2bit-horz.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
lcd-2bit-vert.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
lcd-16bit.c Fix FS#7336 - scrolling lines don't stay coloured. 2007-06-22 04:30:08 +00:00
lcd-charcell.c Now charcell displays require lcd_update() for updating the main lcd content like bitmap displays. 2007-04-06 22:55:00 +00:00
lcd-charset-player.c Player: Fix the dollar sign for old LCD. 2007-04-21 05:32:11 +00:00
lcd-remote-1bit-v.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
lcd-remote-2bit-vi.c for WPS files with many lines the current wps code will call puts_scroll with y-values greater than the size of the scroll[] array (e.g. gwps-common.c:2063). This is a temporary security measure until viewports and/or wps tokenizer are available... 2007-04-01 17:28:46 +00:00
led.c Do the CONFIG_LED define 2007-02-18 05:07:19 +00:00
m5636.c Removed executable flag 2007-01-09 23:29:07 +00:00
mas.c Moved SH1 system code to target tree. * First shot at hwcompat cleanup. 2007-04-11 23:51:00 +00:00
pcf50605.c Add wake on alarm support for Ipods. Rename HAVE_ALARM_MOD to HAVE_ALARM_RTC since it's not always a mod. Make Ipod PCF driver keep other flags in OOCC1 that have been set instead of overwriting them. 2007-02-28 21:55:11 +00:00
power.c Basic gigabeat buttonlight support outside of debug menu FS#7112. Also disables USB PLL and the USB device clock (uneeded to connect to computer) - May offer some power savings. Changed how some pins are initialized. 2007-05-07 19:34:34 +00:00
serial.c Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. 2006-11-27 02:16:32 +00:00