| .. |
|
android.h
|
Android: implement headphone detection thus enabling pause on unplug (FS#12097).
|
2011-06-04 19:17:47 +00:00 |
|
archosfmrecorder.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
archosondiofm.h
|
Make usage of TALK_PARTIAL_LOAD actually Ondio specific. MMC is not always slow.
|
2011-11-06 14:25:33 +00:00 |
|
archosondiosp.h
|
Make usage of TALK_PARTIAL_LOAD actually Ondio specific. MMC is not always slow.
|
2011-11-06 14:25:33 +00:00 |
|
archosplayer.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
archosrecorder.h
|
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
|
2011-02-02 17:43:32 +00:00 |
|
archosrecorderv2.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
cowond2.h
|
Touchscreen: Improved scroll threshold
|
2010-11-10 15:25:15 +00:00 |
|
creativezv.h
|
|
|
|
gigabeatfx.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
gigabeats.h
|
The gigabeat S needs special casing so that you can still hold vol down to access its firmware partition. Additionally, the same logic should apply to firewire on the iPods.
|
2011-05-16 21:10:31 +00:00 |
|
gogearhdd1630.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
gogearhdd6330.h
|
HDD6330: fix the behavior of the lcd during shutdown (fading out), disable poweroff while charging for now.
|
2011-09-13 21:14:11 +00:00 |
|
gogearsa9200.h
|
Correct typo in the Philipps SA9200 config file.
|
2011-02-08 21:42:19 +00:00 |
|
hifimanhm60x.h
|
Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
|
2011-11-03 11:53:02 +00:00 |
|
hifimanhm801.h
|
Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
|
2011-11-03 11:53:02 +00:00 |
|
iaudio7.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
iaudiom3.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
iaudiom5.h
|
Define CONFIG_REMOTE_KEYPAD for iaudio x5/m5 and add a keymap for that remote to the logo plugin. Fixes a warning when building with gcc 4.4.4.
|
2010-07-23 20:20:40 +00:00 |
|
iaudiox5.h
|
Define CONFIG_REMOTE_KEYPAD for iaudio x5/m5 and add a keymap for that remote to the logo plugin. Fixes a warning when building with gcc 4.4.4.
|
2010-07-23 20:20:40 +00:00 |
|
ipod1g2g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipod3g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipod4g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipod6g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipodcolor.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipodmini1g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipodmini2g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipodnano1g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipodnano2g.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
ipodvideo.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
iriverh10.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
iriverh10_5gb.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
iriverh100.h
|
Make the histogram code usable for playback as well. Move the recording histogram code to peakmeter, rename it to remove the recording reference, and rename anything referring to it as well. Change the drawing code so there are more options to position them. This may change your histogram settings, so check after upgrading.
|
2011-06-05 12:36:27 +00:00 |
|
iriverh120.h
|
Make the histogram code usable for playback as well. Move the recording histogram code to peakmeter, rename it to remove the recording reference, and rename anything referring to it as well. Change the drawing code so there are more options to position them. This may change your histogram settings, so check after upgrading.
|
2011-06-05 12:36:27 +00:00 |
|
iriverh300.h
|
Make the histogram code usable for playback as well. Move the recording histogram code to peakmeter, rename it to remove the recording reference, and rename anything referring to it as well. Change the drawing code so there are more options to position them. This may change your histogram settings, so check after upgrading.
|
2011-06-05 12:36:27 +00:00 |
|
iriverifp7xx.h
|
|
|
|
logikdax.h
|
tcc77x targets: various minor cleanups
|
2010-08-28 10:17:19 +00:00 |
|
lyreproto1.h
|
|
|
|
meizum3.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
meizum6sl.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
meizum6sp.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
mini2440.h
|
Define an LCD_DPI for the mini2440 (this change makes the mini2440 compile again)
|
2011-06-25 15:29:32 +00:00 |
|
mpiohd200.h
|
MPIO HD200 manual - tex files
|
2010-11-09 22:10:38 +00:00 |
|
mpiohd300.h
|
MPIO HD300: Enable line-in recording. Thanks Andriej Azariev for pointing out such capability of this DAP.
|
2011-03-15 07:30:29 +00:00 |
|
mrobe100.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
mrobe500.h
|
Put icons on buflib:
|
2011-11-08 09:36:35 +00:00 |
|
nokian8xx.h
|
RaaA: Add RTC support
|
2011-03-08 20:54:42 +00:00 |
|
nokian900.h
|
RaaA: Add RTC support
|
2011-03-08 20:54:42 +00:00 |
|
ondavx747.h
|
Touchscreen: Improved scroll threshold
|
2010-11-10 15:25:15 +00:00 |
|
ondavx767.h
|
Onda VX767: get some facts about the state of the current LCD driver straight
|
2010-11-11 13:04:22 +00:00 |
|
ondavx777.h
|
Touchscreen: Improved scroll threshold
|
2010-11-10 15:25:15 +00:00 |
|
pandora.h
|
RaaA: Add RTC support
|
2011-03-08 20:54:42 +00:00 |
|
rk27generic.h
|
Bulk convert all DOS line endings to UNIX.
|
2011-11-06 22:44:25 +00:00 |
|
samsungyh820.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
samsungyh920.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
samsungyh925.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
samsungyps3.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
sansac100.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
sansac200.h
|
Sansa c200/c200v2: limit allowable contrast value to 0-127, it wraps at 128.
|
2010-11-24 22:17:23 +00:00 |
|
sansac200v2.h
|
Sansa c200/c200v2: limit allowable contrast value to 0-127, it wraps at 128.
|
2010-11-24 22:17:23 +00:00 |
|
sansaclip.h
|
FS#11597 : decrease FCLK frequency when unboosted
|
2010-09-05 15:34:34 +00:00 |
|
sansaclipplus.h
|
powermgmt.h: include config.h
|
2010-09-03 07:03:07 +00:00 |
|
sansaclipv2.h
|
powermgmt.h: include config.h
|
2010-09-03 07:03:07 +00:00 |
|
sansaclipzip.h
|
Sansa clip zip: attempt to fix the pixel format swappedness for good
|
2011-10-31 20:17:04 +00:00 |
|
sansae200.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
sansae200v2.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
sansafuze.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
sansafuzeplus.h
|
imx233/fuze+: use random size for plugin and codec buf (must be non-zero for init attr)
|
2011-09-13 23:38:42 +00:00 |
|
sansafuzev2.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
sansam200.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
sansam200v4.h
|
AB_REPEAT_ENABLE was never defined to 2
|
2010-07-18 18:13:53 +00:00 |
|
sansaview.h
|
Finally submit GUI boost (FS#8668). With this change the CPU is boosted (with a 1 second timeout) on scrollwheel activity in the list, main menu, tree and std context. For now GUI boost is only enabled on scrollwheel targets. The code can easily be enhanced to work with other targets as well.
|
2011-11-11 19:40:32 +00:00 |
|
sdlapp.h
|
RaaA: Add RTC support
|
2011-03-08 20:54:42 +00:00 |
|
sim.h
|
Touchscreen: Improved scroll threshold
|
2010-11-10 15:25:15 +00:00 |
|
tatungtpj1022.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
vibe500.h
|
Switch off ATA DMA for all PP targets. There is sufficient evidence that ATA DMA causes sporadic lockups and static noise on several PP based players. This change is expected to fix FS#11746, FS#11764, FS#11775, FS#11846 and FS#11863.
|
2011-03-01 07:05:18 +00:00 |
|
zenvision.h
|
|
|
|
zenvisionm30gb.h
|
|
|
|
zenvisionm60gb.h
|
|
|
f1ee740f2b