| .. |
|
audio
|
Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly.
|
2010-05-30 18:29:04 +00:00 |
|
rtc
|
as3543 rtc wakeup: fix power off
|
2010-05-24 10:06:46 +00:00 |
|
tuner
|
Si4700 tuner: It doesn't like to do i2c while powered off and hangs the bus. Make 'pause' simply be 'mute', allowing tuning during user mute as well as nicer-sounding unmute.
|
2010-05-24 20:12:10 +00:00 |
|
ata.c
|
ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter.
|
2010-05-21 15:33:31 +00:00 |
|
ata_flash.c
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
ata_mmc.c
|
Simplify some expressions using the ? operator
|
2010-01-01 22:47:25 +00:00 |
|
button.c
|
Commit FS#10887 by me. Change the check for software poweroff to be that the power button is held, not that the power button is held AND that no other button is held. This makes shutting down players with small tightly spaced buttons (Sandisk...) much easier. This also means that combos involving the power button can now potientially power off the player. The H10 and sansas excluding the Fuze use a combo involving power for AB repeat mode. However, the timeout for shutdown is much longer then the long press duration needed for AB repeat, and in practice seems to not be a problem on these players. I've tested this on various players for a long time and bugged other people to try it out, so I think its pretty safe, but if theres problems it can be reverted or keymaps tweaked.
|
2010-05-29 21:54:14 +00:00 |
|
dac.c
|
|
|
|
dac.h
|
Final removal of tabs in firmware path
|
2010-01-03 11:31:14 +00:00 |
|
eeprom_24cxx.c
|
Various files: make function implementations consistent with their declaration in the header file or static if
|
2009-01-31 23:51:11 +00:00 |
|
fat.c
|
Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.
|
2010-04-03 22:02:09 +00:00 |
|
fmradio.c
|
|
|
|
generic_i2c.c
|
Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).
|
2009-06-20 21:45:04 +00:00 |
|
i2c.c
|
Add missing mutex_init to i2c driver
|
2009-07-10 17:46:35 +00:00 |
|
isp1362.c
|
|
|
|
isp1583.c
|
FS#10226 - isp1583.c code cosmetics
|
2009-10-01 05:40:20 +00:00 |
|
lcd-1bit-vert.c
|
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
|
2010-05-18 12:27:20 +00:00 |
|
lcd-2bit-horz.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-2bit-vert.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-2bit-vi.c
|
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
|
2010-05-18 12:27:20 +00:00 |
|
lcd-16bit-vert.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-16bit.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-bitmap-common.c
|
avoid overflow in puts_scroll().
|
2010-05-21 13:30:21 +00:00 |
|
lcd-charcell.c
|
avoid overflow in puts_scroll().
|
2010-05-21 13:30:21 +00:00 |
|
lcd-charset-player.c
|
Final removal of tabs in firmware path
|
2010-01-03 11:31:14 +00:00 |
|
lcd-remote-1bit-v.c
|
|
|
|
lcd-remote-2bit-vi.c
|
|
|
|
led.c
|
|
|
|
m5636.c
|
|
|
|
m66591.c
|
M66591 Driver: Correct some comments.
|
2010-03-17 01:43:15 +00:00 |
|
mas.c
|
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
|
2008-10-14 11:12:20 +00:00 |
|
nand_id.c
|
TCC NAND: The BLOCKS_PER_SEGMENT define was actually the number of planes mentioned in the Samsung NAND datasheet. Add this to the nand_id struct, so that it can be runtime detected (required for some D2s to boot). Use the struct directly instead of making a local copy, and format the nand_info table to 80 columns.
|
2009-03-02 23:36:12 +00:00 |
|
pcf50605.c
|
|
|
|
pcf50606.c
|
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
|
2009-10-11 21:12:06 +00:00 |
|
pcf50635.c
|
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
|
2009-10-11 21:12:06 +00:00 |
|
qt1106.c
|
Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again
|
2008-10-18 22:28:59 +00:00 |
|
ramdisk.c
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
sd.c
|
Fix warnings on logf build
|
2009-12-25 18:27:26 +00:00 |
|
serial.c
|
Simplify some boolean expressions that compare directly against 'true'
|
2010-01-02 16:03:30 +00:00 |
|
sw_i2c.c
|
|
|
|
synaptics-mep.c
|
Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.
|
2010-02-06 19:15:43 +00:00 |
|
touchscreen.c
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
tsc200x.c
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
|
tsc2100.c
|
M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.
|
2009-12-12 18:36:52 +00:00 |
f0e1cf038f