| .. |
|
archos/av300
|
|
|
|
as3525
|
AMS Sansa: Replace another simple delay with a more intelligent MCI FIFO status check.
|
2009-10-01 03:54:36 +00:00 |
|
at91sam
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
imx31
|
fix red
|
2009-08-19 22:15:45 +00:00 |
|
ipod
|
Unify the button driver for the Nano 2G with the driver for earlier clickwheel ipods. The clickwheel hardware appears to be the same - the differences are just related to the hardware init and how the data is read.
|
2009-10-02 23:04:30 +00:00 |
|
iriver
|
Various files: make functions static if they're local or make sure there is a proper #include if not
|
2009-08-06 09:28:25 +00:00 |
|
olympus
|
mrobe100: power off HDD (courtesy of lowlight) ~2h extra playtime
|
2009-08-14 21:11:08 +00:00 |
|
philips
|
fix svn properties
|
2009-08-19 22:41:14 +00:00 |
|
pnx0101
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
s3c2440
|
fix red
|
2009-08-19 22:15:45 +00:00 |
|
s5l8700
|
Implement lcd_blit_yuv() for the 2nd gen Nano, based on the implementation for the iPod Color and 1st gen Nano. mpegplayer now works.
|
2009-10-06 21:48:11 +00:00 |
|
samsung
|
Samsung YH920 : fix lcd_blit_mono displaying twice too wide
|
2009-10-03 13:56:23 +00:00 |
|
sandisk
|
fix more red
|
2009-08-19 22:36:39 +00:00 |
|
tatung
|
make ELIO_TPJ1022 bootloader compile again
|
2009-07-17 22:07:06 +00:00 |
|
tcc77x
|
i7: _backlight_init() turn backlight on, as we can miss panic message
|
2009-09-18 06:01:56 +00:00 |
|
tcc780x
|
Improved Cowon D2 touchscreen driver.
|
2009-09-26 17:31:30 +00:00 |
|
tms320dm320
|
M:Robe 500: Fix glitches when using DMA for LCD updates.
|
2009-09-07 17:12:57 +00:00 |
|
adc-as3514.c
|
|
|
|
adc-pp5020.c
|
Make the Philips HDD1630 ADC work: it needs a slightly different init sequence. Also, it only needs 2 channels enabled.
|
2009-01-27 03:36:30 +00:00 |
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
|
|
|
ata-as-arm.S
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
ata-nand-telechips.c
|
Clean up duplicate #includes
|
2009-09-27 14:46:44 +00:00 |
|
ata-pp5002.c
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
ata-pp5020.c
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
ata-sd-pp.c
|
sd_first_drive is only used when HAVE_HOTSWAP is defined, so add appropriate #ifdefs
|
2009-07-20 19:46:36 +00:00 |
|
ata-target.h
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
audio-pp.c
|
|
|
|
crt0-pp-bl.S
|
|
|
|
crt0-pp.S
|
FS#9730 by Torne Wuff - support installing Rockbox in the firmware partition in place of the main Apple firmware. This image is only loaded if no rockbox.ipod is found so does not affect current behaviour. The advantage is a small increase in boottime. This patch also adds documentation to bootloader/ipod.c in the form of a comment describing the booting behaviour.
|
2009-05-12 20:41:44 +00:00 |
|
crt0.S
|
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
|
2009-06-08 23:05:33 +00:00 |
|
ffs-arm.S
|
|
|
|
i2c-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
|
i2c-telechips.c
|
Fix missing i2c mutex initialisation for telechips.
|
2009-06-21 13:26:32 +00:00 |
|
i2s-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
|
kernel-pp.c
|
Correct Björn's name in various file headers.
|
2009-03-23 17:08:46 +00:00 |
|
lcd-as-memframe.S
|
Apply some ARMv6 optimisations to YUV blitting. Speeds up mpegplayer on Gigabeat S by ~2% in undithered and ~7.5% in dithered mode.
|
2009-07-15 22:14:21 +00:00 |
|
lcd-c200_c200v2.c
|
Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button.
|
2009-09-05 18:56:59 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
mmu-arm.S
|
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly.
|
2009-02-11 23:56:00 +00:00 |
|
pcm-pp.c
|
Fix FS#9949 - Song not playing, noise instead. Stale code was left from before transferring in segments and one calculation was just wrong for limiting trasfer size. Make buffer aligning consistent, change <= 0 on size_t variable to == 0 and remove pointless limit on overall buffer size.
|
2009-03-07 05:21:58 +00:00 |
|
pcm-telechips.c
|
i7: pcm-telechips fix sampling rate that was about 40000 instead of 44100
|
2009-09-20 19:53:15 +00:00 |
|
powermgmt-ascodec.c
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
sd-pp-target.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
system-arm.c
|
Revert r22034 since the backlight handling functions are not consistently named between targets.
|
2009-07-25 18:42:30 +00:00 |
|
system-arm.h
|
ARMv6: Optimize interrupt enable/disable with cpsie and cpsid. Section off system-arm.h by ARM_ARCH rather than checking within each implementation.
|
2009-02-02 03:51:50 +00:00 |
|
system-pp502x.c
|
initial commit of remote support for m:robe 100 courtesy of lowlight; simulator support including small fixes for the m:robe 500
|
2009-07-26 14:26:14 +00:00 |
|
system-pp5002.c
|
Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
|
2009-02-11 12:55:51 +00:00 |
|
system-target.h
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
timer-pp.c
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
usb-drv-arc.c
|
don't treat extremely quick transfers as errors
|
2009-08-13 18:50:43 +00:00 |
|
usb-fw-pp502x.c
|
make ELIO_TPJ1022 bootloader compile again
|
2009-07-17 22:07:06 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-target.h
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
usb-tcc.c
|
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
|
2009-05-16 15:30:09 +00:00 |
|
wmcodec-pp.c
|
|
|
|
wmcodec-telechips.c
|
|
|
ee21a5322e