Linus Nielsen Feltzing e75327b332 FS#7738 - Scroll wheel acceleration for iPod ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15681 a1c6a512-1295-4272-9138-f99709370657		2007-11-19 11:05:54 +00:00
..
1g2g	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
3g	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
video	iPod Video LCD driver: Reintroduce the simple method of waiting for update completion for use in the bootloader, because bootloaders don't enable interrupts and hence the tick task won't work. Slower than the full driver, but still faster than the old one, because it first transfers the data, and then polls the BCM.	2007-11-02 01:18:14 +00:00
adc-ipod-pcf.c	First version of a 1st/2nd gen ADC driver. 1st gen is untested yet.	2007-07-30 20:12:03 +00:00
adc-target.h
backlight-4g_color.c	Move 4th Gen (grayscale and color) backlight init where it belongs.	2007-11-18 14:01:58 +00:00
backlight-mini1g_mini2g.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
backlight-nano_video.c	Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.	2007-11-12 18:49:53 +00:00
backlight-target.h	Move 4th Gen (grayscale and color) backlight init where it belongs.	2007-11-18 14:01:58 +00:00
button-1g-3g.c	iPod 1st Gen: Dynamic wheel enable. This reduces wheel power consumption to about 0.5% when hold is not enabled and there is no activity, and keeps it disabled on hold.	2007-08-18 09:47:19 +00:00
button-clickwheel.c	FS#7738 - Scroll wheel acceleration for iPod	2007-11-19 11:05:54 +00:00
button-mini1g.c	The GPIO interrupts are split into several port groups on all PP502x versions, so move those definitions into pp5020.h, and add the missing group. Make microSD hotswap detection work on Sansa c200. Note that microSD access itself does not work yet.	2007-11-04 13:22:17 +00:00
button-target.h
lcd-color_nano.c	Move 4th Gen (grayscale and color) backlight init where it belongs.	2007-11-18 14:01:58 +00:00
lcd-gray.c	Move 4th Gen (grayscale and color) backlight init where it belongs.	2007-11-18 14:01:58 +00:00
power-ipod.c	Finally: HDD power control for all PP502x iPods (4th gen Grayscale, Color, Minis, Video). * Wait a short time after powering on the HDD on all disk based targets, as that seems like a good idea. Shorten the excessive wait on initial power on.	2007-11-03 23:57:24 +00:00
powermgmt-ipod-pcf.c	First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.	2007-08-17 06:45:18 +00:00