| .. |
|
sansa-c200v2
|
Sansa c200v2: update DBOP button reading mechanism, this enables readout of the volume buttons, rec and hold button.
|
2009-09-05 18:56:59 +00:00 |
|
sansa-clip
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
|
sansa-e200v2
|
Speed up lcd_update_rect by ~2.5% by counting towards 0 in the loop.
|
2009-10-24 16:01:53 +00:00 |
|
sansa-fuze
|
Speed up lcd_update_rect by ~2.5% by counting towards 0 in the loop.
|
2009-10-24 16:01:53 +00:00 |
|
sansa-m200v4
|
Sansa Clip & m200v4 : calls backlight_hold_changed() when hold button is toggled
|
2009-08-15 15:02:51 +00:00 |
|
adc-target.h
|
|
|
|
app.lds
|
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
|
2009-06-08 23:05:33 +00:00 |
|
ascodec-as3525.c
|
Sansa AMS : don't use the SHAREDBSS_ATTR since we don't have a coprocessor
|
2009-06-02 22:45:02 +00:00 |
|
ascodec-target.h
|
FS#10344 - AMSSansa Dynamically adjust core voltage to extend playtime.
|
2009-06-30 17:56:21 +00:00 |
|
ata_sd_as3525.c
|
AMS Sansa: Adjust SD Card frequency to Identification frequency at beginning of card init instead of the end of pl180 controller init.
|
2009-10-19 05:34:25 +00:00 |
|
audio-as3525.c
|
|
|
|
backlight-e200v2-fuze.c
|
FS#10306 by Thomas Martitz : button light doesn't change on SD transfers on Sansa AMS (Fuze & e200v2)
|
2009-06-18 22:33:02 +00:00 |
|
boot.lds
|
FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
|
2009-06-08 23:05:33 +00:00 |
|
button-e200v2-fuze.c
|
Fuze/e200v2: Fix inaccuracy when moving the wheel slowly (fixes FS#10667).
|
2009-10-09 23:27:38 +00:00 |
|
clock-target.h
|
AMSSansa: Add AS3525_DRAM_FREQ as a configurable frequency. Attempts to use PCLK != DRAM still fail but a method is now in place. Default scheme remains 248/62/62.
|
2009-05-29 20:19:35 +00:00 |
|
debug-as3525.c
|
Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places
|
2009-10-17 18:02:48 +00:00 |
|
debug-target.h
|
|
|
|
dma-pl081.c
|
Patch by Rafaël Carré - Sansa AMS: Fix a few mistakes in DMA code
|
2009-04-07 17:08:26 +00:00 |
|
dma-target.h
|
|
|
|
fmradio-i2c-as3525.c
|
Fix delays in generic i2c driver, reduce delays in ams sansa fmradio i2c driver (tested on m200v4, clip, e200v2, fuze).
|
2009-06-20 21:45:04 +00:00 |
|
i2s-as3525.c
|
|
|
|
kernel-as3525.c
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
lcd-as-e200v2-fuze.S
|
ARM asm LCD and ATA driver functions: Don't save r12 as it is a scratch reg. Saves a bit of stack and execution time.
|
2009-07-11 23:43:44 +00:00 |
|
pcm-as3525.c
|
Sansa AMS PCM : replace buggy and confusing one-liner
|
2009-10-13 16:41:20 +00:00 |
|
power-as3525.c
|
|
|
|
powermgmt-as3525.c
|
|
|
|
powermgmt-target.h
|
Enable charging on the Sansa Fuze (charging/discharging curves are still uncalibrated)
|
2009-06-20 14:29:21 +00:00 |
|
system-as3525.c
|
AMS Sansa: Lower ADC checkvalue for voltage scaling to 1.175V as some players run slightly low.
|
2009-10-16 17:44:23 +00:00 |
|
system-target.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
timer-as3525.c
|
Remove the TIMER_* macros and declare target-specific functions in timer.h
|
2009-06-29 14:29:57 +00:00 |
|
usb-as3525.c
|
Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader
|
2009-10-15 10:23:18 +00:00 |
|
usb-drv-as3525.c
|
Sansa AMS USB driver : still not working
|
2009-10-15 10:03:20 +00:00 |
e4921d6ab5