..
archos /av300
as3525
Support new Fuzev2 revisions (fuzev2_variant == 1)
2010-07-19 15:29:28 +00:00
at91sam
imx31
i.MX31: Make DMA ISR call loop a bit more efficient.
2010-06-30 07:08:10 +00:00
ipod
iPod 3G: Ensure wheel repeats are not generated unless the same keycode is posted more than once in a row, regardless of velocity. Remove 'was_hold' from handle_scroll_wheel calls since the call is never reachable with was_hold being true. Just clear pending ints in one spot after setting levels. Init prev_scroll properly again in 3g case.
2010-06-21 18:47:42 +00:00
iriver
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
olympus
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
pbell
hdd6330: change the synaptics-mep driver in a few places according to the touchpad behavior.
2010-07-04 12:03:38 +00:00
philips
hdd6330: Enable buttonlights.
2010-07-04 12:48:46 +00:00
pnx0101
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
2010-05-24 16:42:32 +00:00
s3c2440
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
2010-06-30 02:02:46 +00:00
s5l8700
lcd-m6sp.c: remove \r
2010-06-25 13:32:57 +00:00
samsung
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
sandisk
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
2010-06-26 10:07:17 +00:00
tatung
tcc77x
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
tcc780x
D2: Fix another timing loop that broke when we switched to the EABI compiler, this time in the LCD driver.
2010-07-11 22:21:33 +00:00
tms320dm320
Make sure files which aren't windows-specific use \n line endings only
2010-06-17 16:59:51 +00:00
adc-as3514.c
adc-as3514.c: cosmetics
2010-05-15 19:44:54 +00:00
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
as3514/as3543 fixes
2010-05-17 20:53:25 +00:00
ata-as-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
ata-target.h
audio-pp.c
bits-armv4.S
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
2010-06-30 02:02:46 +00:00
bits-armv6.S
Remove atomic register bit manipulation functions from i.MX and s3c target code and introduce generic functions for ARM (bitmod32, bitset32, and bitclr32). Multiprocessor support is possible but just not implemented at the moment, only interrupt lockout.
2010-06-30 02:02:46 +00:00
crt0-pp-bl.S
crt0-pp.S
ARM: use BX when branch to an address in register
2010-05-31 15:14:26 +00:00
crt0.S
arm/crt0.S: comment why the reset vector doesn't use absolute addressing
2010-06-18 18:31:14 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
Re-write the Telechips I2C delay routine in assembler to stop the compiler optimising it away. Tested with EABI and non-EABI compilers.
2010-06-16 21:03:57 +00:00
i2s-pp.c
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
2010-06-26 10:07:17 +00:00
kernel-pp.c
lcd-as-memframe.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
lcd-c200_c200v2.c
udelay between command and data write seems to get rid of the display glitches on C200v2
2010-06-27 03:24:56 +00:00
lcd-ssd1815.c
memcpy-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memmove-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memset-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
memset16-arm.S
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
mmu-arm.h
mmu-arm.S
Update Samsung YP-S3 bootloader demo
2010-05-30 21:43:14 +00:00
mmu-armv6.S
pcm-pp.c
pcm-pp: revert r26756
2010-06-11 11:25:16 +00:00
pcm-telechips.c
Make PCM->driver interface about as simple as it will get. Registered callback, zero data, alignment and stops are handled entirely inside pcm.c; driver merely calls fixed pcm.c callback. Remove pcm_record_more and do it just like playback; the original reason behind it isn't very practical in general. Everything checks out on supported targets. There wer some compat changes I can't check out on many unsupoorted but if there's a problem it will be a minor oops. Plugins become incompatible due to recording tweak-- full update. Sorted API.
2010-05-24 16:42:32 +00:00
powermgmt-ascodec.c
as3525v2: fix end of charge detection
2010-05-19 14:06:08 +00:00
sd-pp-target.h
support-arm.S
ARM: __div0() takes no argument
2010-06-12 17:15:39 +00:00
system-arm.c
__div0: give the address of the instruction calling division to UIE
2010-06-12 17:15:44 +00:00
system-arm.h
system-pp502x.c
system-pp5002.c
Squeeze down the PP5002 cache routines a bit.
2010-06-18 06:54:58 +00:00
system-target.h
thread-arm.c
FS#11335 by me: make ARM assembly functions thumb-friendly
2010-06-11 04:41:36 +00:00
thread-pp.c
For multiprocessor targets, do the thread_exit routine such that we don't need to rely on the compiler's good graces to have stack switching be reliable. Only needs a few asm instructions.
2010-06-18 03:10:18 +00:00
timer-pp.c
usb-drv-arc.c
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
usb-target.h
usb-tcc.c
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
wmcodec-pp.c
FS#11417 by Joe Balough: fix audio/tuner on philips hdd6330
2010-06-19 03:51:57 +00:00
wmcodec-telechips.c
e44b65c806