b37e6bc8c1
Change all lcd drivers to using a pointer to the static framebuffer instead of directly accessing the static array. This will let us later do fun things like dynamic framebuffer sizes (RaaA) or ability to use different buffers for different layers (dynamic skin backdrops!) Change-Id: I0a4d58a9d7b55e6c932131b929e5d4c9f9414b06
243 lines
8 KiB
C
243 lines
8 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Adopted for MPIO HD300 by Marcin Bukat
|
|
* Copyright (C) 2007 by Jens Arnold
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "lcd.h"
|
|
|
|
/*** definitions ***/
|
|
|
|
/* LCD command codes */
|
|
#define LCD_CNTL_POWER_CONTROL 0x25
|
|
#define LCD_CNTL_VOLTAGE_SELECT 0x2b
|
|
#define LCD_CNTL_LINE_INVERT_DRIVE 0x36
|
|
#define LCD_CNTL_GRAY_SCALE_PATTERN 0x39
|
|
#define LCD_CNTL_TEMP_GRADIENT_SELECT 0x4e
|
|
#define LCD_CNTL_OSC_FREQUENCY 0x5f
|
|
#define LCD_CNTL_ON_OFF 0xae
|
|
#define LCD_CNTL_OSC_ON_OFF 0xaa
|
|
#define LCD_CNTL_OFF_MODE 0xbe
|
|
#define LCD_CNTL_POWER_SAVE 0xa8
|
|
#define LCD_CNTL_REVERSE 0xa6
|
|
#define LCD_CNTL_ALL_LIGHTING 0xa4
|
|
#define LCD_CNTL_COMMON_OUTPUT_STATUS 0xc4
|
|
#define LCD_CNTL_COLUMN_ADDRESS_DIR 0xa0
|
|
#define LCD_CNTL_NLINE_ON_OFF 0xe4
|
|
#define LCD_CNTL_DISPLAY_MODE 0x66
|
|
#define LCD_CNTL_DUTY_SET 0x6d
|
|
#define LCD_CNTL_ELECTRONIC_VOLUME 0x81
|
|
#define LCD_CNTL_DATA_INPUT_DIR 0x84
|
|
#define LCD_CNTL_DISPLAY_START_LINE 0x8a
|
|
#define LCD_CNTL_AREA_SCROLL 0x10
|
|
|
|
#define LCD_CNTL_PAGE 0xb1
|
|
#define LCD_CNTL_COLUMN 0x13
|
|
#define LCD_CNTL_DATA_WRITE 0x1d
|
|
|
|
/*** shared semi-private declarations ***/
|
|
extern const unsigned char lcd_dibits[16] ICONST_ATTR;
|
|
|
|
/*** hardware configuration ***/
|
|
int lcd_default_contrast(void)
|
|
{
|
|
return DEFAULT_CONTRAST_SETTING;
|
|
}
|
|
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
/* Keep val in acceptable hw range */
|
|
if (val < 0)
|
|
val = 0;
|
|
else if (val > 127)
|
|
val = 127;
|
|
|
|
lcd_write_command_ex(LCD_CNTL_ELECTRONIC_VOLUME, val, -1);
|
|
}
|
|
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
lcd_write_command(LCD_CNTL_REVERSE | (yesno?1:0));
|
|
}
|
|
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
|
void lcd_set_flip(bool yesno)
|
|
{
|
|
if (yesno)
|
|
{
|
|
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 1);
|
|
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 0);
|
|
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 0);
|
|
}
|
|
else
|
|
{
|
|
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 0);
|
|
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 1);
|
|
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 1);
|
|
}
|
|
}
|
|
|
|
void lcd_init_device(void)
|
|
{
|
|
and_l(~0x00000800, &GPIO_FUNCTION); /* CS3 line */
|
|
|
|
/* LCD Reset GPO34 */
|
|
or_l(0x00000004, &GPIO1_ENABLE); /* set as output */
|
|
or_l(0x00000004, &GPIO1_FUNCTION); /* switch to secondary function - GPIO */
|
|
|
|
and_l(~0x00000004, &GPIO1_OUT); /* RESET low */
|
|
sleep(1); /* delay at least 1000 ns */
|
|
or_l(0x00000004, &GPIO1_OUT); /* RESET high */
|
|
sleep(1);
|
|
|
|
lcd_write_command(LCD_CNTL_ON_OFF | 1); /* LCD ON */
|
|
lcd_write_command(LCD_CNTL_OFF_MODE | 1); /* OFF -> VCC on drivers */
|
|
lcd_write_command(LCD_CNTL_REVERSE | 0); /* Reverse OFF */
|
|
lcd_write_command(LCD_CNTL_ALL_LIGHTING | 0); /* Normal */
|
|
lcd_write_command(LCD_CNTL_COMMON_OUTPUT_STATUS | 1); /* Reverse dir */
|
|
lcd_write_command_ex(LCD_CNTL_DISPLAY_START_LINE, 0, -1);
|
|
lcd_write_command(LCD_CNTL_COLUMN_ADDRESS_DIR | 0); /* Normal */
|
|
lcd_write_command_ex(LCD_CNTL_DISPLAY_MODE, 0, -1); /* Greyscale mode */
|
|
lcd_write_command_ex(LCD_CNTL_GRAY_SCALE_PATTERN, 0x53, -1);
|
|
lcd_write_command_ex(LCD_CNTL_DUTY_SET, 0x20, 1);
|
|
lcd_write_command_ex(LCD_CNTL_ELECTRONIC_VOLUME, 24, -1); /* 0x18 */
|
|
|
|
lcd_write_command(LCD_CNTL_OSC_ON_OFF | 1); /* Oscillator ON */
|
|
lcd_write_command(LCD_CNTL_POWER_SAVE | 0);
|
|
lcd_write_command_ex(LCD_CNTL_VOLTAGE_SELECT, 3, -1);
|
|
lcd_write_command_ex(LCD_CNTL_POWER_CONTROL, 0x17, -1);
|
|
lcd_write_command_ex(LCD_CNTL_OSC_FREQUENCY, 3, -1);
|
|
lcd_write_command(LCD_CNTL_NLINE_ON_OFF | 1); /* N-line ON */
|
|
lcd_write_command_ex(LCD_CNTL_LINE_INVERT_DRIVE, 0x10, -1);
|
|
lcd_write_command_ex(LCD_CNTL_TEMP_GRADIENT_SELECT, 0, -1);
|
|
|
|
lcd_update();
|
|
}
|
|
|
|
/*** update functions ***/
|
|
|
|
/* Performance function that works with an external buffer
|
|
note that by and bheight are in 8-pixel units! */
|
|
void lcd_blit_mono(const unsigned char *data, int x, int by, int width,
|
|
int bheight, int stride)
|
|
{
|
|
const unsigned char *src, *src_end;
|
|
unsigned char *dst_u, *dst_l;
|
|
static unsigned char upper[LCD_WIDTH] IBSS_ATTR;
|
|
static unsigned char lower[LCD_WIDTH] IBSS_ATTR;
|
|
unsigned int byte;
|
|
|
|
by *= 2;
|
|
|
|
while (bheight--)
|
|
{
|
|
src = data;
|
|
src_end = data + width;
|
|
dst_u = upper;
|
|
dst_l = lower;
|
|
do
|
|
{
|
|
byte = *src++;
|
|
*dst_u++ = lcd_dibits[byte & 0x0F];
|
|
byte >>= 4;
|
|
*dst_l++ = lcd_dibits[byte & 0x0F];
|
|
}
|
|
while (src < src_end);
|
|
|
|
lcd_write_command_ex(LCD_CNTL_PAGE, by++, -1);
|
|
lcd_write_command_ex(LCD_CNTL_COLUMN, x, -1);
|
|
lcd_write_command(LCD_CNTL_DATA_WRITE);
|
|
lcd_write_data(upper, width);
|
|
|
|
lcd_write_command_ex(LCD_CNTL_PAGE, by++, -1);
|
|
lcd_write_command_ex(LCD_CNTL_COLUMN, x, -1);
|
|
lcd_write_command(LCD_CNTL_DATA_WRITE);
|
|
lcd_write_data(lower, width);
|
|
|
|
data += stride;
|
|
}
|
|
}
|
|
|
|
/* Helper function for lcd_grey_phase_blit(). */
|
|
void lcd_grey_data(unsigned char *values, unsigned char *phases, int count);
|
|
|
|
/* Performance function that works with an external buffer
|
|
note that by and bheight are in 4-pixel units! */
|
|
void lcd_blit_grey_phase(unsigned char *values, unsigned char *phases,
|
|
int x, int by, int width, int bheight, int stride)
|
|
{
|
|
stride <<= 2; /* 4 pixels per block */
|
|
while (bheight--)
|
|
{
|
|
lcd_write_command_ex(LCD_CNTL_PAGE, by++, -1);
|
|
lcd_write_command_ex(LCD_CNTL_COLUMN, x, -1);
|
|
lcd_write_command(LCD_CNTL_DATA_WRITE);
|
|
lcd_grey_data(values, phases, width);
|
|
values += stride;
|
|
phases += stride;
|
|
}
|
|
}
|
|
|
|
/* Update the display.
|
|
This must be called after all other LCD functions that change the display. */
|
|
void lcd_update(void) ICODE_ATTR;
|
|
void lcd_update(void)
|
|
{
|
|
|
|
/* Setup initial PAGE and COLUMN address
|
|
* the addressing circuit will take care of the rest
|
|
*/
|
|
lcd_write_command_ex(LCD_CNTL_PAGE, 0, -1);
|
|
lcd_write_command_ex(LCD_CNTL_COLUMN, 0, -1);
|
|
lcd_write_command(LCD_CNTL_DATA_WRITE);
|
|
|
|
/* Copy display bitmap to hardware */
|
|
lcd_write_data (FBADDR(0,0), LCD_WIDTH*LCD_FBHEIGHT);
|
|
}
|
|
|
|
/* Update a fraction of the display. */
|
|
void lcd_update_rect(int, int, int, int) ICODE_ATTR;
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
|
{
|
|
int ymax;
|
|
|
|
/* The Y coordinates have to work on even 8 pixel rows */
|
|
ymax = (y + height-1) >> 2;
|
|
y >>= 2;
|
|
|
|
if(x + width > LCD_WIDTH)
|
|
width = LCD_WIDTH - x;
|
|
if (width <= 0)
|
|
return; /* nothing left to do, 0 is harmful to lcd_write_data() */
|
|
if(ymax >= LCD_FBHEIGHT)
|
|
ymax = LCD_FBHEIGHT-1;
|
|
|
|
/* Copy specified rectange bitmap to hardware */
|
|
for (; y <= ymax; y++)
|
|
{
|
|
lcd_write_command_ex(LCD_CNTL_PAGE, y, -1);
|
|
lcd_write_command_ex(LCD_CNTL_COLUMN, x, -1);
|
|
|
|
lcd_write_command(LCD_CNTL_DATA_WRITE);
|
|
lcd_write_data (FBADDR(x,y), width);
|
|
}
|
|
}
|