..
adc.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
as3514.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
as3525.h
Redo some parts of my previous commit, thanks Jens and Dave
2009-01-27 19:45:00 +00:00
ascodec.h
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
2008-10-31 00:37:58 +00:00
ata.h
*_hard_reset() is only used inside ata.c, so there's no need to export it to the world
2008-11-04 19:37:28 +00:00
ata_idle_notify.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
ata_mmc.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
audio.h
Keyclick fixup take two. It is only 88 samples (2msec) long so keep a small static buffer around for beeps less than or equal to keyclick duration. This way it operates no matter the buffer state and still won't interfere with alternate PCM operations like recording or plugin playback.
2008-12-13 06:01:08 +00:00
audiohw.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
backlight-sw-fading.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
backlight.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
bidi.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
bitswap.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
buffer.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
button.h
Get checkwps working again
2009-01-29 20:49:43 +00:00
config-c100.h
fix reds
2008-11-01 16:49:38 +00:00
config-c200.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-c200v2.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-clip.h
Commit stable parts of FS#9611 - Sansa Clip radio code
2009-01-21 20:51:43 +00:00
config-cowond2.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-creativezv.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-creativezvm.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-creativezvm60gb.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-e200.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-e200v2.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-fmrecorder.h
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
2009-01-13 14:41:29 +00:00
config-fuze.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-gigabeat-s.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-gigabeat.h
Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.
2008-12-12 11:01:07 +00:00
config-h10.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-h10_5gb.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-h100.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-h120.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-h300.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-hdd1630.h
Philips HDD1630 lcd work: register defines and enable contrast, flip, and inverse.
2009-01-21 02:23:29 +00:00
config-iaudio7.h
i7: set low-battery values and enable shutdown on low-battery
2008-12-26 19:31:48 +00:00
config-iaudiom3.h
Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code).
2008-12-24 16:58:41 +00:00
config-iaudiom5.h
Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code).
2008-12-24 16:58:41 +00:00
config-iaudiox5.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-ifp7xx.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipod1g2g.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipod3g.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-ipod4g.h
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
2008-12-25 01:46:16 +00:00
config-ipodcolor.h
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
2008-12-25 01:46:16 +00:00
config-ipodmini.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-ipodmini2g.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-ipodnano.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-ipodvideo.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-logikdax.h
Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the normal case
2008-11-30 15:53:36 +00:00
config-m200.h
fix reds
2008-11-01 16:49:38 +00:00
config-m200v4.h
Sansa AMS: PCM driver (FS#9592)
2008-12-04 22:27:48 +00:00
config-meizu-m3.h
Add new storage-related defines for meizu
2008-11-01 17:25:49 +00:00
config-meizu-m6sl.h
Add new storage-related defines for meizu
2008-11-01 17:25:49 +00:00
config-meizu-m6sp.h
Add new storage-related defines for meizu
2008-11-01 17:25:49 +00:00
config-mrobe100.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-mrobe500.h
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
2008-11-20 11:27:31 +00:00
config-ondavx747.h
Onda VX747:
2009-01-27 00:38:58 +00:00
config-ondavx747p.h
Onda VX747:
2009-01-21 20:58:33 +00:00
config-ondavx767.h
Onda VX747:
2009-01-21 20:58:33 +00:00
config-ondiofm.h
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
2009-01-13 14:41:29 +00:00
config-ondiosp.h
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
2009-01-13 14:41:29 +00:00
config-player.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config-recorder.h
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
2009-01-13 14:41:29 +00:00
config-recorderv2.h
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
2009-01-13 14:41:29 +00:00
config-sa9200.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config-tpj1022.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
config.h
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
2009-01-26 23:21:49 +00:00
config_caps.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
cpu.h
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
2008-10-12 16:46:01 +00:00
debug.h
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
2008-11-20 11:27:31 +00:00
disk.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
dm320.h
Fix up ZVM builds. It appeared to share common definitions with PP502x targets so use those. Remove one stale comment left behind in last commit.
2009-01-19 14:06:47 +00:00
ds2411.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
eeprom_24cxx.h
Various files: make function implementations consistent with their declaration in the header file or static if
2009-01-31 23:51:11 +00:00
eeprom_settings.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
enc_base.h
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
2008-10-08 22:18:16 +00:00
events.h
Accept FS#9480 - centralise and organise the events in the apps/ layer.
2008-10-16 10:38:03 +00:00
fat.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
fmradio.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
fmradio_i2c.h
Fix red.
2008-12-21 20:31:31 +00:00
font.h
Get checkwps working again
2009-01-29 20:49:43 +00:00
gdb_api.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
general.h
remove align_buffer from firmare/general.c, replacing with ALIGN_BUFFER macro, and replace all uses of it (only resize.c in core, and pictureflow and mpegplayer plugins), remove it from plugin_api,
2009-01-13 13:48:26 +00:00
generic_i2c.h
Generic I2C: fix various problems with this (now) unused driver
2008-12-07 19:25:51 +00:00
hangul.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
hd66789r.h
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
2008-09-16 08:09:44 +00:00
hotswap.h
cleanup storage defines
2008-10-31 21:25:04 +00:00
hwcompat.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2c-coldfire.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2c-pp.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2c.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
i2s.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
iap.h
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
2008-12-25 01:46:16 +00:00
ifp_usb_serial.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
imx31l.h
Gigabeat S: Implement a genuine udelay function. Timer is gated to not run in WFI mode to save power and as such time until rollover is variable.
2009-01-23 01:23:25 +00:00
isp1362.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
isp1583.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
jz4740.h
MIPS:
2009-02-04 17:37:05 +00:00
jz_mxu.h
Ingenic Jz4740:
2008-12-31 01:57:07 +00:00
kernel.h
Remove struct spinlock to cleanup some mess and simplify. It's only used in boosting for multiprocesors and a pure two-corelock heirarchy will do just fine.
2009-02-03 12:16:45 +00:00
lcd-charcell.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
lcd-remote.h
Latest work on the bmp on-load scaler:
2008-12-26 07:03:22 +00:00
lcd.h
Latest work on the bmp on-load scaler:
2008-12-26 07:03:22 +00:00
led.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
logf.h
Commit FS#9733 (multiline logf) by Yoshihisa Uchida
2008-12-31 17:01:00 +00:00
ltv350qv.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
lv24020lp.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
m5636.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mas.h
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
2008-10-14 11:12:20 +00:00
mas35xx.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mc13783.h
MC13783 PMIC: Make some defines more strictly correct-- interrupts, etc.
2008-11-19 06:22:09 +00:00
mcf5249.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mcf5250.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mips-archdefs.h
And set svn:eol-style ...
2008-07-14 15:19:29 +00:00
mips.h
And set svn:eol-style ...
2008-07-14 15:19:29 +00:00
mipsregs.h
Onda VX747:
2008-11-04 20:30:01 +00:00
mmc.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
mp3_playback.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
mv.h
Now also commit added files
2008-11-01 16:25:04 +00:00
nand.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
nand_id.h
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
2008-11-01 16:14:28 +00:00
panic.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcf5060x.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcf50605.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcf50606.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pcm.h
Keyclick fixup take two. It is only 88 samples (2msec) long so keep a small static buffer around for beeps less than or equal to keyclick duration. This way it operates no matter the buffer state and still won't interfere with alternate PCM operations like recording or plugin playback.
2008-12-13 06:01:08 +00:00
pcm_sampr.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
pl081.h
Sansa AMS: Use DMA for SD transfers (read and write)
2008-11-25 13:38:32 +00:00
pl180.h
Fix the Sansa AMS SD driver
2008-11-16 22:26:50 +00:00
pnx0101.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
power.h
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
2008-12-27 19:18:50 +00:00
powermgmt.h
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).
2009-01-11 10:07:22 +00:00
pp5002.h
Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.
2008-12-12 11:01:07 +00:00
pp5020.h
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
2009-01-22 22:05:04 +00:00
pp5024.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
profile.h
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
2008-07-28 22:43:41 +00:00
qt1106.h
set svn properties
2008-09-17 18:50:34 +00:00
r61509.h
Fix the LCD bug!
2008-07-16 15:25:35 +00:00
ramdisk.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
rolo.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
rtc.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
s1a0903x01.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
s3c2440.h
Meg-FX: s3c register definitions really should be unsigned. Switch from 'int' to 'unsigned long' like other targets.
2008-12-04 15:06:48 +00:00
s5l8700.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
scroll_engine.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
sd.h
sd.h : avoid namespace collision by prefixing defines with SD_
2008-11-09 23:40:21 +00:00
serial.h
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
2008-12-25 01:46:16 +00:00
sh7034.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
si4700.h
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
2008-12-27 19:18:50 +00:00
sound.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
spdif.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
spi.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
storage.h
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
2008-11-04 19:57:36 +00:00
structec.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
sw_i2c.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
synaptics-mep.h
Move the Synaptics touchpad driver for the m:robe 100 to a common place. It will (soon) be used for the Philips HDD1630.
2008-12-17 04:38:53 +00:00
system.h
Accept FS#9717 by Akio Idehara with a small change suggested by Rafaël Carré avoiding simulator warnings about redefining endianness switching macros
2009-01-24 10:16:22 +00:00
tcc77x.h
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
2008-09-06 17:50:59 +00:00
tcc780x.h
Add some missed bits + change MODE to TMODE
2008-09-22 19:27:21 +00:00
tea5767.h
code police : fix some multiply defined variables
2008-10-18 23:31:29 +00:00
thread.h
Unless I'm severely mistaken, we can drop a thread slot now since mpegplayer creates one less thread.
2009-01-05 10:57:12 +00:00
timer.h
Gigabeat S: Get timer API working. metronome will work now.
2009-01-05 00:00:29 +00:00
tlv320.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
tsc2100.h
Minor missing #include and static function fixes for mrobe
2008-09-10 20:14:22 +00:00
tuner.h
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
2008-11-11 14:46:13 +00:00
uda1380.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
usb-tcc.h
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
2008-11-30 15:43:15 +00:00
usb.h
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
2009-01-22 22:05:04 +00:00
usb_ch9.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
usb_core.h
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
2009-01-19 13:41:25 +00:00
usb_drv.h
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
2009-01-19 13:41:25 +00:00
wm8731.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8751.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8758.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8975.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8978.h
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
2009-01-20 22:55:10 +00:00
wm8985.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
wmcodec.h
Updated our source code header to explicitly mention that we are GPL v2 or
2008-06-28 18:10:04 +00:00
d5827d5f9a