Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/ondavx777.h
Nils Wallménius d29a11b7a8 Rename HAVE_PITCHSCREEN to HAVE_PITCHCONTROL 
Also move the definition to config.h

Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
2012-05-09 14:32:38 +02:00

209 lines
6.1 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* This config file is for the Onda VX747(+)/VX777
*/
#define CONFIG_SDRAM_START 0x80004000
#define MODEL_NAME "Onda VX777"
#define MODEL_NUMBER 61
/* Support FAT16 for SD cards <= 2GB */
#define HAVE_FAT16SUPPORT
/* ChinaChip NAND FTL */
#define CONFIG_NAND NAND_CC
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if the target has volume keys which can be used in the lists */
//#define HAVE_VOLUME_IN_LIST
/* LCD dimensions */
#define CONFIG_LCD LCD_ONDAVX747
#ifdef BOOTLOADER /* OF requires landscape */
#define LCD_WIDTH 400
#define LCD_HEIGHT 240
#else
#define LCD_WIDTH 240
#define LCD_HEIGHT 400
#endif
#define LCD_DPI 155
#define LCD_DEPTH 16 /* 16bit colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
/* Define this if your LCD can be enabled/disabled */
#define HAVE_LCD_ENABLE
#define CONFIG_KEYPAD ONDAVX777_PAD
#define HAVE_TOUCHSCREEN
#define HAVE_BUTTON_DATA
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_JZ47XX
/* Tuner config */
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 16
#define DEFAULT_BRIGHTNESS_SETTING 16 /* "full brightness" */
#define DEFAULT_DIMNESS_SETTING 1 /* "most dim" */
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x100000
/* Define this if you have the Jz4740 internal codec */
#define HAVE_JZ4740_CODEC
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)
/* has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* has no volume control, so we use the software ones */
#define HAVE_SW_VOLUME_CONTROL
/* software controlled volume ranges from -73 -> 0 dB, other than that
is controlled by hardware */
#define SW_VOLUME_MIN -73
#define SW_VOLUME_MAX 0
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \
SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \
SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
#define CONFIG_I2C I2C_JZ47XX
#define NEED_ADC_CLOSE 1
#define BATTERY_CAPACITY_DEFAULT 1250 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 500 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 100 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
#define CFG_EXTAL 12000000 /* EXT clock: 12 Mhz */
/*
No access to the NAND yet..
#define CONFIG_STORAGE (STORAGE_NAND | STORAGE_SD)
#define NUM_DRIVES 2
*/
#define CONFIG_STORAGE (STORAGE_SD)
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 1
#define HAVE_HOTSWAP_STORAGE_AS_MAIN
#define INCLUDE_TIMEOUT_API
/* Define this if media can be exchanged on the fly */
#define HAVE_HOTSWAP
/* Define this if you have a Ingenic JZ4732 */
#define CONFIG_CPU JZ4732
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* Define this if you have a speaker */
#define HAVE_SPEAKER
/* Define this to the CPU frequency */
#define CPU_FREQ 336000000 /* CPU clock: 336 MHz */
/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "vx777"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define CONFIG_USBOTG USBOTG_JZ4740
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB
/* Connect by events, not by tick polling */
#define USB_STATUS_BY_EVENT
#define USB_VENDOR_ID 0x07C4
#define USB_PRODUCT_ID 0xA4A5
/* Define this if a programmable hotkey is mapped */
//#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink