7ee1e30609
Remove the old debug stuff about VDDx and add a clean api to get/set the regulator (VDDD, VDDA, VDDIO, VDDMEM). This is useful for proper frequency scaling. Change-Id: Ia5a1a712fd66652a8ad9601ed00db31aba5a7561
245 lines
10 KiB
C
245 lines
10 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2011 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#ifndef __POWER_IMX233__
|
|
#define __POWER_IMX233__
|
|
|
|
#include "system.h"
|
|
#include "system-target.h"
|
|
#include "cpu.h"
|
|
|
|
#define HW_POWER_BASE 0x80044000
|
|
|
|
#define HW_POWER_CTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x0))
|
|
#define HW_POWER_CTRL__ENIRQ_VBUS_VALID (1 << 3)
|
|
#define HW_POWER_CTRL__VBUSVALID_IRQ (1 << 4)
|
|
#define HW_POWER_CTRL__POLARITY_VBUSVALID (1 << 5)
|
|
|
|
#define HW_POWER_5VCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x10))
|
|
#define HW_POWER_5VCTRL__ENABLE_DCDC (1 << 0)
|
|
#define HW_POWER_5VCTRL__PWRUP_VBUS_CMPS (1 << 1)
|
|
#define HW_POWER_5VCTRL__VBUSVALID_5VDETECT (1 << 4)
|
|
#define HW_POWER_5VCTRL__DCDC_XFER (1 << 5)
|
|
#define HW_POWER_5VCTRL__VBUSVALID_TRSH_BP 8
|
|
#define HW_POWER_5VCTRL__VBUSVALID_TRSH_BM (0x7 << 8)
|
|
#define HW_POWER_5VCTRL__VBUSVALID_TRSH_2p9 (0 << 8)
|
|
#define HW_POWER_5VCTRL__VBUSVALID_TRSH_4V (1 << 8)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT_BP 12
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT_BM (0x3f << 12)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__10mA (1 << 12)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__20mA (1 << 13)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__50mA (1 << 14)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__100mA (1 << 15)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__200mA (1 << 16)
|
|
#define HW_POWER_5VCTRL__CHARGE_4P2_ILIMIT__400mA (1 << 17)
|
|
#define HW_POWER_5VCTRL__PWD_CHARGE_4P2 (1 << 20)
|
|
|
|
#define HW_POWER_MINPWR (*(volatile uint32_t *)(HW_POWER_BASE + 0x20))
|
|
#define HW_POWER_MINPWR__HALF_FETS (1 << 5)
|
|
#define HW_POWER_MINPWR__DOUBLE_FETS (1 << 6)
|
|
|
|
#define HW_POWER_CHARGE (*(volatile uint32_t *)(HW_POWER_BASE + 0x30))
|
|
#define HW_POWER_CHARGE__BATTCHRG_I_BP 0
|
|
#define HW_POWER_CHARGE__BATTCHRG_I_BM 0x3f
|
|
#define HW_POWER_CHARGE__BATTCHRG_I__10mA (1 << 0)
|
|
#define HW_POWER_CHARGE__BATTCHRG_I__20mA (1 << 1)
|
|
#define HW_POWER_CHARGE__BATTCHRG_I__50mA (1 << 2)
|
|
#define HW_POWER_CHARGE__BATTCHRG_I__100mA (1 << 3)
|
|
#define HW_POWER_CHARGE__BATTCHRG_I__200mA (1 << 4)
|
|
#define HW_POWER_CHARGE__BATTCHRG_I__400mA (1 << 5)
|
|
#define HW_POWER_CHARGE__STOP_ILIMIT_BP 8
|
|
#define HW_POWER_CHARGE__STOP_ILIMIT_BM 0xf00
|
|
#define HW_POWER_CHARGE__STOP_ILIMIT__10mA (1 << 8)
|
|
#define HW_POWER_CHARGE__STOP_ILIMIT__20mA (1 << 9)
|
|
#define HW_POWER_CHARGE__STOP_ILIMIT__50mA (1 << 10)
|
|
#define HW_POWER_CHARGE__STOP_ILIMIT__100mA (1 << 11)
|
|
#define HW_POWER_CHARGE__PWD_BATTCHRG (1 << 16)
|
|
#define HW_POWER_CHARGE__CHRG_STS_OFF (1 << 19)
|
|
#define HW_POWER_CHARGE__ENABLE_LOAD (1 << 22)
|
|
|
|
#define HW_POWER_VDDDCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x40))
|
|
#define HW_POWER_VDDDCTRL__TRG_BP 0
|
|
#define HW_POWER_VDDDCTRL__TRG_BM 0x1f
|
|
#define HW_POWER_VDDDCTRL__BO_OFFSET_BP 8
|
|
#define HW_POWER_VDDDCTRL__BO_OFFSET_BM (0x7 << 8)
|
|
#define HW_POWER_VDDDCTRL__TRG_STEP 25 /* mV */
|
|
#define HW_POWER_VDDDCTRL__TRG_MIN 800 /* mV */
|
|
#define HW_POWER_VDDDCTRL__LINREG_OFFSET_BP 16
|
|
#define HW_POWER_VDDDCTRL__LINREG_OFFSET_BM (0x3 << 16)
|
|
#define HW_POWER_VDDDCTRL__ENABLE_LINREG (1 << 21)
|
|
|
|
#define HW_POWER_VDDACTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x50))
|
|
#define HW_POWER_VDDACTRL__TRG_BP 0
|
|
#define HW_POWER_VDDACTRL__TRG_BM 0x1f
|
|
#define HW_POWER_VDDACTRL__BO_OFFSET_BP 8
|
|
#define HW_POWER_VDDACTRL__BO_OFFSET_BM (0x7 << 8)
|
|
#define HW_POWER_VDDACTRL__TRG_STEP 25 /* mV */
|
|
#define HW_POWER_VDDACTRL__TRG_MIN 1500 /* mV */
|
|
#define HW_POWER_VDDACTRL__LINREG_OFFSET_BP 12
|
|
#define HW_POWER_VDDACTRL__LINREG_OFFSET_BM (0x3 << 12)
|
|
#define HW_POWER_VDDACTRL__ENABLE_LINREG (1 << 17)
|
|
|
|
#define HW_POWER_VDDIOCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x60))
|
|
#define HW_POWER_VDDIOCTRL__TRG_BP 0
|
|
#define HW_POWER_VDDIOCTRL__TRG_BM 0x1f
|
|
#define HW_POWER_VDDIOCTRL__BO_OFFSET_BP 8
|
|
#define HW_POWER_VDDIOCTRL__BO_OFFSET_BM (0x7 << 8)
|
|
#define HW_POWER_VDDIOCTRL__TRG_STEP 25 /* mV */
|
|
#define HW_POWER_VDDIOCTRL__TRG_MIN 2800 /* mV */
|
|
#define HW_POWER_VDDIOCTRL__LINREG_OFFSET_BP 12
|
|
#define HW_POWER_VDDIOCTRL__LINREG_OFFSET_BM (0x3 << 12)
|
|
|
|
#define HW_POWER_VDDMEMCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0x70))
|
|
#define HW_POWER_VDDMEMCTRL__TRG_BP 0
|
|
#define HW_POWER_VDDMEMCTRL__TRG_BM 0x1f
|
|
#define HW_POWER_VDDMEMCTRL__TRG_STEP 50 /* mV */
|
|
#define HW_POWER_VDDMEMCTRL__TRG_MIN 1700 /* mV */
|
|
#define HW_POWER_VDDMEMCTRL__ENABLE_LINREG (1 << 8)
|
|
|
|
#define HW_POWER_DCDC4P2 (*(volatile uint32_t *)(HW_POWER_BASE + 0x80))
|
|
#define HW_POWER_DCDC4P2__CMPTRIP_BP 0
|
|
#define HW_POWER_DCDC4P2__CMPTRIP_BM 0x1f
|
|
#define HW_POWER_DCDC4P2__CMPTRIP__0p85 0
|
|
#define HW_POWER_DCDC4P2__ENABLE_DCDC (1 << 22)
|
|
#define HW_POWER_DCDC4P2__ENABLE_4P2 (1 << 23)
|
|
#define HW_POWER_DCDC4P2__DROPOUT_CTRL_BP 28
|
|
#define HW_POWER_DCDC4P2__DROPOUT_CTRL_BM (0xf << 28)
|
|
#define HW_POWER_DCDC4P2__DROPOUT_CTRL__200mV (3 << 30)
|
|
#define HW_POWER_DCDC4P2__DROPOUT_CTRL__HIGHER (2 << 28)
|
|
|
|
#define HW_POWER_MISC (*(volatile uint32_t *)(HW_POWER_BASE + 0x90))
|
|
#define HW_POWER_MISC__SEL_PLLCLK 1
|
|
#define HW_POWER_MISC__FREQSEL_BP 4
|
|
#define HW_POWER_MISC__FREQSEL_BM (0x7 << 4)
|
|
#define HW_POWER_MISC__FREQSEL__RES 0
|
|
#define HW_POWER_MISC__FREQSEL__20MHz 1
|
|
#define HW_POWER_MISC__FREQSEL__24MHz 2
|
|
#define HW_POWER_MISC__FREQSEL__19p2MHz 3
|
|
#define HW_POWER_MISC__FREQSEL__14p4MHz 4
|
|
#define HW_POWER_MISC__FREQSEL__18MHz 5
|
|
#define HW_POWER_MISC__FREQSEL__21p6MHz 6
|
|
#define HW_POWER_MISC__FREQSEL__17p28MHz 7
|
|
|
|
#define HW_POWER_LOOPCTRL (*(volatile uint32_t *)(HW_POWER_BASE + 0xb0))
|
|
#define HW_POWER_LOOPCTRL__DC_C_BP 0
|
|
#define HW_POWER_LOOPCTRL__DC_C_BM 0x3
|
|
#define HW_POWER_LOOPCTRL__DC_R_BP 4
|
|
#define HW_POWER_LOOPCTRL__DC_R_BM 0xf0
|
|
#define HW_POWER_LOOPCTRL__DC_FF_BP 8
|
|
#define HW_POWER_LOOPCTRL__DC_FF_BM (0x7 << 8)
|
|
#define HW_POWER_LOOPCTRL__EN_RCSCALE_BP 12
|
|
#define HW_POWER_LOOPCTRL__EN_RCSCALE_BM (0x3 << 12)
|
|
#define HW_POWER_LOOPCTRL__EN_RCSCALE__DISABLED 0
|
|
#define HW_POWER_LOOPCTRL__EN_RCSCALE__2X 1
|
|
#define HW_POWER_LOOPCTRL__EN_RCSCALE__4X 2
|
|
#define HW_POWER_LOOPCTRL__EN_RCSCALE__8X 3
|
|
#define HW_POWER_LOOPCTRL__RCSCALE_THRESH (1 << 14)
|
|
#define HW_POWER_LOOPCTRL__DF_HYST_THRESH (1 << 15)
|
|
#define HW_POWER_LOOPCTRL__CM_HYST_THRESH (1 << 16)
|
|
#define HW_POWER_LOOPCTRL__EN_DF_HYST (1 << 17)
|
|
#define HW_POWER_LOOPCTRL__EN_CM_HYST (1 << 18)
|
|
#define HW_POWER_LOOPCTRL__HYST_SIGN (1 << 19)
|
|
#define HW_POWER_LOOPCTRL__TOGGLE_DIF (1 << 20)
|
|
|
|
#define HW_POWER_STS (*(volatile uint32_t *)(HW_POWER_BASE + 0xc0))
|
|
#define HW_POWER_STS__VBUSVALID (1 << 1)
|
|
#define HW_POWER_STS__CHRGSTS (1 << 11)
|
|
#define HW_POWER_STS__PSWITCH_BP 20
|
|
#define HW_POWER_STS__PSWITCH_BM (3 << 20)
|
|
#define HW_POWER_STS__PWRUP_SOURCE_BP 24
|
|
#define HW_POWER_STS__PWRUP_SOURCE_BM (0x3f << 24)
|
|
|
|
#define HW_POWER_BATTMONITOR (*(volatile uint32_t *)(HW_POWER_BASE + 0xe0))
|
|
#define HW_POWER_BATTMONITOR__ENBATADJ (1 << 10)
|
|
#define HW_POWER_BATTMONITOR__BATT_VAL_BP 16
|
|
#define HW_POWER_BATTMONITOR__BATT_VAL_BM (0x3ff << 16)
|
|
|
|
#define HW_POWER_RESET (*(volatile uint32_t *)(HW_POWER_BASE + 0x100))
|
|
#define HW_POWER_RESET__UNLOCK 0x3E770000
|
|
#define HW_POWER_RESET__PWD 0x1
|
|
|
|
void imx233_power_set_charge_current(unsigned current); /* in mA */
|
|
void imx233_power_set_stop_current(unsigned current); /* in mA */
|
|
void imx233_power_enable_batadj(bool enable);
|
|
|
|
enum imx233_regulator_t
|
|
{
|
|
REGULATOR_VDDD, /* target, brownout, linreg, linreg offset */
|
|
REGULATOR_VDDA, /* target, brownout, linreg, linreg offset */
|
|
REGULATOR_VDDIO, /* target, brownout, linreg offset */
|
|
REGULATOR_VDDMEM, /* target, linreg */
|
|
REGULATOR_COUNT,
|
|
};
|
|
|
|
void imx233_power_get_regulator(enum imx233_regulator_t reg, unsigned *target_mv,
|
|
unsigned *brownout_mv);
|
|
|
|
void imx233_power_set_regulator(enum imx233_regulator_t reg, unsigned target_mv,
|
|
unsigned brownout_mv);
|
|
|
|
// offset is -1,0 or 1
|
|
void imx233_power_get_regulator_linreg(enum imx233_regulator_t reg,
|
|
bool *enabled, int *linreg_offset);
|
|
|
|
// offset is -1,0 or 1
|
|
void imx233_power_set_regulator_linreg(enum imx233_regulator_t reg,
|
|
bool enabled, int linreg_offset);
|
|
|
|
static inline void imx233_power_set_dcdc_freq(bool pll, unsigned freq)
|
|
{
|
|
HW_POWER_MISC &= ~(HW_POWER_MISC__SEL_PLLCLK | HW_POWER_MISC__FREQSEL_BM);
|
|
/* WARNING: HW_POWER_MISC does not have a SET/CLR variant ! */
|
|
if(pll)
|
|
{
|
|
HW_POWER_MISC |= freq << HW_POWER_MISC__FREQSEL_BP;
|
|
HW_POWER_MISC |= HW_POWER_MISC__SEL_PLLCLK;
|
|
}
|
|
}
|
|
|
|
struct imx233_power_info_t
|
|
{
|
|
bool dcdc_sel_pllclk; /* clock source of DC-DC: pll or 24MHz xtal */
|
|
int dcdc_freqsel;
|
|
int charge_current;
|
|
int stop_current;
|
|
bool charging;
|
|
bool batt_adj;
|
|
bool _4p2_enable;
|
|
bool _4p2_dcdc;
|
|
int _4p2_cmptrip;
|
|
int _4p2_dropout;
|
|
bool _5v_pwd_charge_4p2;
|
|
int _5v_charge_4p2_limit;
|
|
bool _5v_dcdc_xfer;
|
|
bool _5v_enable_dcdc;
|
|
int _5v_vbusvalid_thr;
|
|
bool _5v_vbusvalid_detect;
|
|
bool _5v_vbus_cmps;
|
|
};
|
|
|
|
#define POWER_INFO_DCDC (1 << 4)
|
|
#define POWER_INFO_CHARGE (1 << 5)
|
|
#define POWER_INFO_4P2 (1 << 6)
|
|
#define POWER_INFO_5V (1 << 7)
|
|
#define POWER_INFO_ALL 0xff
|
|
|
|
struct imx233_power_info_t imx233_power_get_info(unsigned flags);
|
|
|
|
#endif /* __POWER_IMX233__ */
|