Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/gogearhdd1630.h
Boris Gjenero d118f47d24 Re-enable PP502x ATA DMA 
PP502x ATA DMA was disabled in 55fab77 because it caused various
instability on all targets using it. This instability is fixed in
583c948 via FS#12391. Here, ATA DMA is enabled for all PP502x targets
except nano1g and hdd6330. For nano1g, there may be other causes of
instability and more testing is needed. ATA DMA does not work on hdd6330.

Change-Id: I786b9edb19e74e6eb957ab205ea026f0969200ac
Reviewed-on: http://gerrit.rockbox.org/340
Tested-by: David Hooper <dave@beermex.com>
Tested-by: Boris Gjenero <boris.gjenero@gmail.com>
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
Tested-by: Szymon Dziok <b0hoon@o2.pl>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
2013-01-24 11:27:12 +01:00

210 lines
6.1 KiB
C
Raw Blame History

/*
* This config file is for the Philips GoGear HDD16x0/HDD18x0
*/
/* For Rolo and boot loader */
#define MODEL_NUMBER 31
#define MODEL_NAME "Philips GoGear HDD16x0"
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/*define this if the ATA controller and method of USB access support LBA48 */
#define HAVE_LBA48
/* define this if you have recording possibility */
#define HAVE_RECORDING
/* Define bitmask of input sources - recordable bitmask can be defined
explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
/* define the bitmask of hardware sample rates */
#define HW_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
/* define the bitmask of recording sample rates */
#define REC_SAMPR_CAPS (SAMPR_CAP_96 | SAMPR_CAP_88 | SAMPR_CAP_48 | \
SAMPR_CAP_44 | SAMPR_CAP_32 | SAMPR_CAP_8)
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* LCD dimensions */
#define LCD_WIDTH 128
#define LCD_HEIGHT 128
#define LCD_DEPTH 16 /* 65536 colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 byte-swapped */
#ifndef BOOTLOADER
/* Define this if your LCD can be enabled/disabled */
/* #define HAVE_LCD_ENABLE */
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
* should be defined as well.
* We can currently put the lcd to sleep but it won't wake up properly */
/* #define HAVE_LCD_SLEEP */
/* #define HAVE_LCD_SLEEP_SETTING */
#endif
/* define this if you can flip your LCD */
#define HAVE_LCD_FLIP
/* define this if you can invert the colours on your LCD */
#define HAVE_LCD_INVERT
/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
#define CONFIG_KEYPAD PHILIPS_HDD1630_PAD
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
/* define this if you have a real-time clock. The HDD16x0 has a PCF8563 RTC,
but it's register compatible with the E8564. */
#ifndef BOOTLOADER
#define CONFIG_RTC RTC_E8564
#define HAVE_RTC_ALARM
#endif
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000
/* Define this if you have the WM8731 audio codec */
#define HAVE_WM8731
/* WM8731 has no tone controls, so we use the software ones */
#define HAVE_SW_TONE_CONTROLS
/* TODO: #define AB_REPEAT_ENABLE */
/* FM Tuner */
#define CONFIG_TUNER TEA5767
#define CONFIG_TUNER_XTAL 32768
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
/* #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING */
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 1
#define MAX_BRIGHTNESS_SETTING 16
#define DEFAULT_BRIGHTNESS_SETTING 13 /* match OF brightness */
/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT
#define HAVE_BUTTONLIGHT_BRIGHTNESS
#define BATTERY_CAPACITY_DEFAULT 630 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 630 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 630 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
/* Hardware controlled charging */
#define CONFIG_CHARGING CHARGING_SIMPLE
/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER
/* Define this if you have a PortalPlayer PP5020 */
#define CONFIG_CPU PP5022
/* Define this if you want to use the PP5020 i2c interface */
#define CONFIG_I2C I2C_PP5020
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The start address index for ROM builds */
#define ROM_START 0x00000000
/* The size of the flash ROM */
#define FLASH_SIZE 0x100000
/* Define this to the CPU frequency */
#define CPU_FREQ 75000000
/* Type of LCD */
#define CONFIG_LCD LCD_HDD1630
/* Define this if your LCD can set contrast */
#define HAVE_LCD_CONTRAST
#define MIN_CONTRAST_SETTING 0
#define MAX_CONTRAST_SETTING 127
#define DEFAULT_CONTRAST_SETTING 63 /* Match boot contrast */
/* We're able to shut off power to the HDD */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC and data. These are
only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC 0x0
#define FIRMWARE_OFFSET_FILE_DATA 0x8
/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_ARC
/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USE_ROCKBOX_USB
#define USB_VENDOR_ID 0x0471
#define USB_PRODUCT_ID 0x014C
#define HAVE_USB_HID_MOUSE
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define MI4_FORMAT
#define BOOTFILE_EXT "mi4"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define ICODE_ATTR_TREMOR_NOT_MDCT
/* DMA is used only for reading on PP502x because although reads are ~8x faster
* writes appear to be ~25% slower.
*/
#define HAVE_ATA_DMA
/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY
Reference in a new issue View git blame Copy permalink