rockbox/bootloader/main-pp.c
Barry Wardell 2f16d4f1b3 Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works.
Changes made:

Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader.

Define MODEL_NAME string in config-*.h for use in bootloader.

Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S.

Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe):
* Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100).
* Remove unused DEBUG and STUB code from crt0-pp.S.
* Make CPU wait for COP to be sleeping when we put the COP to sleep.
* Invalidate COP cache when COP wakes
* Flush CPU cache before waking COP
* Make sure only the CPU clears the BSS (not the COP)
* Make sure only the CPU sets up its own stack (not the COP)

Rolo works on H10, so enable it.

Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
2006-12-19 11:33:53 +00:00

263 lines
5.7 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* Based on Rockbox iriver bootloader by Linus Nielsen Feltzing
* and the ipodlinux bootloader by Daniel Palffy and Bernard Leach
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include "cpu.h"
#include "system.h"
#include "lcd.h"
#include "kernel.h"
#include "thread.h"
#include "ata.h"
#include "fat.h"
#include "disk.h"
#include "font.h"
#include "adc.h"
#include "backlight.h"
#include "button.h"
#include "panic.h"
#include "power.h"
#include "file.h"
/* Size of the buffer to store the loaded firmware image */
#define MAX_LOADSIZE (10*1024*1024)
/* A buffer to load the iriver firmware or Rockbox into */
unsigned char loadbuffer[MAX_LOADSIZE];
char version[] = APPSVERSION;
#define DRAM_START 0x10000000
int line=0;
/* Load original mi4 firmware. This function expects a file called
"/System/OF.bin" on the player. It should be a mi4 firmware decrypted
and header stripped using mi4code. It reads the file in to a memory
buffer called buf. The rest of the loading is done in main() and crt0.S
*/
int load_original_firmware(unsigned char* buf)
{
int fd;
int rc;
int len;
fd = open("/System/OF.bin", O_RDONLY);
len = filesize(fd);
if (len > MAX_LOADSIZE)
return -6;
rc = read(fd, buf, len);
if(rc < len)
return -4;
close(fd);
return len;
}
/* Load Rockbox firmware (rockbox.*) */
int load_rockbox(unsigned char* buf)
{
int fd;
int rc;
int len;
unsigned long chksum;
char model[5];
unsigned long sum;
int i;
char str[80];
fd = open("/.rockbox/" BOOTFILE, O_RDONLY);
if(fd < 0)
{
fd = open("/" BOOTFILE, O_RDONLY);
if(fd < 0)
return -1;
}
len = filesize(fd) - 8;
snprintf(str, sizeof(str), "Length: %x", len);
lcd_puts(0, line++ ,str);
lcd_update();
if (len > MAX_LOADSIZE)
return -6;
lseek(fd, FIRMWARE_OFFSET_FILE_CRC, SEEK_SET);
rc = read(fd, &chksum, 4);
chksum=betoh32(chksum); /* Rockbox checksums are big-endian */
if(rc < 4)
return -2;
snprintf(str, sizeof(str), "Checksum: %x", chksum);
lcd_puts(0, line++ ,str);
lcd_update();
rc = read(fd, model, 4);
if(rc < 4)
return -3;
model[4] = 0;
snprintf(str, sizeof(str), "Model name: %s", model);
lcd_puts(0, line++ ,str);
lcd_update();
lseek(fd, FIRMWARE_OFFSET_FILE_DATA, SEEK_SET);
rc = read(fd, buf, len);
if(rc < len)
return -4;
close(fd);
sum = MODEL_NUMBER;
for(i = 0;i < len;i++) {
sum += buf[i];
}
snprintf(str, sizeof(str), "Sum: %x", sum);
lcd_puts(0, line++ ,str);
lcd_update();
if(sum != chksum)
return -5;
return len;
}
void* main(void)
{
char buf[256];
int i;
int rc;
unsigned short* identify_info;
struct partinfo* pinfo;
system_init();
kernel_init();
lcd_init();
font_init();
button_init();
line=0;
lcd_setfont(FONT_SYSFIXED);
lcd_puts(0, line++, "Rockbox boot loader");
snprintf(buf, sizeof(buf), "Version: 20%s", version);
lcd_puts(0, line++, buf);
snprintf(buf, sizeof(buf), MODEL_NAME);
lcd_puts(0, line++, buf);
lcd_update();
i=ata_init();
if (i==0) {
identify_info=ata_get_identify();
/* Show model */
for (i=0; i < 20; i++) {
((unsigned short*)buf)[i]=htobe16(identify_info[i+27]);
}
buf[40]=0;
for (i=39; i && buf[i]==' '; i--) {
buf[i]=0;
}
lcd_puts(0, line++, buf);
lcd_update();
} else {
snprintf(buf, sizeof(buf), "ATA: %d", i);
lcd_puts(0, line++, buf);
lcd_update();
}
disk_init();
rc = disk_mount_all();
if (rc<=0)
{
lcd_puts(0, line++, "No partition found");
lcd_update();
}
pinfo = disk_partinfo(0);
snprintf(buf, sizeof(buf), "Partition 0: 0x%02x %ld MB",
pinfo->type, pinfo->size / 2048);
lcd_puts(0, line++, buf);
lcd_update();
i=button_read_device();
if(i==BUTTON_LEFT)
{
lcd_puts(0, line++, "Loading original firmware...");
lcd_update();
rc=load_original_firmware(loadbuffer);
} else {
lcd_puts(0, line++, "Loading Rockbox...");
lcd_update();
rc=load_rockbox(loadbuffer);
}
if (rc < 0) {
snprintf(buf, sizeof(buf), "Rockbox error: %d",rc);
lcd_puts(0, line++, buf);
lcd_update();
while(1) {}
}
memcpy((void*)DRAM_START,loadbuffer,rc);
return (void*)DRAM_START;
}
/* These functions are present in the firmware library, but we reimplement
them here because the originals do a lot more than we want */
void reset_poweroff_timer(void)
{
}
int dbg_ports(void)
{
return 0;
}
void mpeg_stop(void)
{
}
void usb_acknowledge(void)
{
}
void usb_wait_for_disconnect(void)
{
}
void sys_poweroff(void)
{
}