..
audio
as3525v1 use an as3515 audio codec/PMU, not an as3517 as previously thought
2010-05-16 09:22:02 +00:00
rtc
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
2010-05-04 10:07:53 +00:00
tuner
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
ata.c
Make builds with MAX_PHYS_SECTOR_SIZE defined (ipod video) work with larger sizes if the drive is sane.
2010-04-14 14:40:03 +00:00
ata_flash.c
ata_mmc.c
Simplify some expressions using the ? operator
2010-01-01 22:47:25 +00:00
button.c
Revert r26055 since it breaks certain Archos targets.
2010-05-15 21:27:22 +00:00
dac.c
dac.h
Final removal of tabs in firmware path
2010-01-03 11:31:14 +00:00
eeprom_24cxx.c
fat.c
Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.
2010-04-03 22:02:09 +00:00
fmradio.c
generic_i2c.c
i2c.c
isp1362.c
isp1583.c
lcd-1bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-horz.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-2bit-vi.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-16bit-vert.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-16bit.c
Comment out lcd_drawline() DEBUGF messages which show in various simulators
2010-02-20 06:42:45 +00:00
lcd-bitmap-common.c
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
lcd-charcell.c
Fix remaining reds/yellows.
2010-05-14 13:21:40 +00:00
lcd-charset-player.c
Final removal of tabs in firmware path
2010-01-03 11:31:14 +00:00
lcd-remote-1bit-v.c
lcd-remote-2bit-vi.c
led.c
m5636.c
m66591.c
M66591 Driver: Correct some comments.
2010-03-17 01:43:15 +00:00
mas.c
nand_id.c
pcf50605.c
pcf50606.c
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
2009-10-11 21:12:06 +00:00
pcf50635.c
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
2009-10-11 21:12:06 +00:00
qt1106.c
ramdisk.c
sd.c
Fix warnings on logf build
2009-12-25 18:27:26 +00:00
serial.c
Simplify some boolean expressions that compare directly against 'true'
2010-01-02 16:03:30 +00:00
sw_i2c.c
synaptics-mep.c
Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.
2010-02-06 19:15:43 +00:00
touchscreen.c
Remove svn:executable from firmware
2009-10-31 02:26:40 +00:00
tsc200x.c
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
2009-10-15 20:13:29 +00:00
tsc2100.c
M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.
2009-12-12 18:36:52 +00:00
b9beeccbcf