e2022a26d0
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11967 a1c6a512-1295-4272-9138-f99709370657
231 lines
8.7 KiB
ArmAsm
231 lines
8.7 KiB
ArmAsm
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2004-2006 by Jens Arnold
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
.section .icode,"ax",@progbits
|
|
|
|
.align 2
|
|
.global _copy_read_sectors
|
|
.type _copy_read_sectors,@function
|
|
|
|
/* Read a number of words from the ATA data port
|
|
*
|
|
* Assumes wordcount to be a multiple of 4
|
|
*
|
|
* Arguments:
|
|
* r4 - buffer address
|
|
* r5 - word count
|
|
*
|
|
* Register usage:
|
|
* r0 - scratch
|
|
* r1/r2 - read buffers
|
|
* r3 - mask (if unaligned)
|
|
* r4 - current address
|
|
* r5 - end address
|
|
* r6 - ata port
|
|
*/
|
|
|
|
_copy_read_sectors:
|
|
add r5, r5 /* words -> bytes */
|
|
add r4, r5 /* bytes -> end address */
|
|
add #-12, r5 /* adjust for offsets */
|
|
mov.l .ata_data, r6
|
|
|
|
mov r4, r0
|
|
tst #1, r0 /* 16-bit aligned ? */
|
|
bt .r_aligned /* yes, do word copy */
|
|
|
|
/* not 16-bit aligned */
|
|
mov #-1, r3 /* prepare a bit mask for high byte */
|
|
shll8 r3 /* r3 = 0xFFFFFF00 */
|
|
|
|
mov.w @r6, r2 /* read first word (1st round) */
|
|
mov.b r2, @r4 /* store low byte of first word */
|
|
bra .r_start_b /* jump into loop after next instr. */
|
|
add #-5, r4 /* adjust for dest. offsets; now even */
|
|
|
|
.align 2
|
|
.r_loop_b: /* main loop: copy 4 words in a row */
|
|
mov.w @r6, r2 /* read first word (2+ round) */
|
|
and r3, r1 /* get high byte of fourth word (2+ round) */
|
|
extu.b r2, r0 /* get low byte of first word (2+ round) */
|
|
or r1, r0 /* combine with high byte of fourth word */
|
|
mov.w r0, @(4, r4) /* store at buf[4] */
|
|
nop /* maintain alignment */
|
|
.r_start_b:
|
|
mov.w @r6, r1 /* read second word */
|
|
and r3, r2 /* get high byte of first word */
|
|
extu.b r1, r0 /* get low byte of second word */
|
|
or r2, r0 /* combine with high byte of first word */
|
|
mov.w r0, @(6, r4) /* store at buf[6] */
|
|
add #8, r4 /* buf += 8 */
|
|
mov.w @r6, r2 /* read third word */
|
|
and r3, r1 /* get high byte of second word */
|
|
extu.b r2, r0 /* get low byte of third word */
|
|
or r1, r0 /* combine with high byte of second word */
|
|
mov.w r0, @r4 /* store at buf[0] */
|
|
cmp/hi r4, r5 /* check for end */
|
|
mov.w @r6, r1 /* read fourth word */
|
|
and r3, r2 /* get high byte of third word */
|
|
extu.b r1, r0 /* get low byte of fourth word */
|
|
or r2, r0 /* combine with high byte of third word */
|
|
mov.w r0, @(2, r4) /* store at buf[2] */
|
|
bt .r_loop_b
|
|
/* 24 instructions for 4 copies, takes 30 clock cycles (4 wait) */
|
|
/* avg. 7.5 cycles per word */
|
|
|
|
swap.b r1, r0 /* get high byte of last word */
|
|
rts
|
|
mov.b r0, @(4, r4) /* and store it */
|
|
|
|
/* 16-bit aligned, loop(read and store word) */
|
|
.r_aligned:
|
|
mov.w @r6, r2 /* read first word (1st round) */
|
|
bra .r_start_w /* jump into loop after next instr. */
|
|
add #-6, r4 /* adjust for destination offsets */
|
|
|
|
.align 2
|
|
.r_loop_w: /* main loop: copy 4 words in a row */
|
|
mov.w @r6, r2 /* read first word (2+ round) */
|
|
swap.b r1, r0 /* swap fourth word (2+ round) */
|
|
mov.w r0, @(4, r4) /* store fourth word (2+ round) */
|
|
nop /* maintain alignment */
|
|
.r_start_w:
|
|
mov.w @r6, r1 /* read second word */
|
|
swap.b r2, r0 /* swap first word */
|
|
mov.w r0, @(6, r4) /* store first word in buf[6] */
|
|
add #8, r4 /* buf += 8 */
|
|
mov.w @r6, r2 /* read third word */
|
|
swap.b r1, r0 /* swap second word */
|
|
mov.w r0, @r4 /* store second word in buf[0] */
|
|
cmp/hi r4, r5 /* check for end */
|
|
mov.w @r6, r1 /* read fourth word */
|
|
swap.b r2, r0 /* swap third word */
|
|
mov.w r0, @(2, r4) /* store third word */
|
|
bt .r_loop_w
|
|
/* 16 instructions for 4 copies, takes 22 clock cycles (4 wait) */
|
|
/* avg. 5.5 cycles per word */
|
|
|
|
swap.b r1, r0 /* swap fourth word (last round) */
|
|
rts
|
|
mov.w r0, @(4, r4) /* and store it */
|
|
|
|
.r_end:
|
|
.size _copy_read_sectors,.r_end-_copy_read_sectors
|
|
|
|
.align 2
|
|
.global _copy_write_sectors
|
|
.type _copy_write_sectors,@function
|
|
|
|
/* Write a number of words to the ATA data port
|
|
*
|
|
* Assumes wordcount to be a multiple of 2.
|
|
* Writing is not unrolled as much as reading, for several reasons:
|
|
*
|
|
* - a similar instruction sequence is faster for writing than for reading
|
|
* because the auto-incrementing load inctructions can be used
|
|
* - writing profits from warp mode
|
|
*
|
|
* Both of these add up to have writing faster than the more unrolled reading.
|
|
*
|
|
* Arguments:
|
|
* r4 - buffer address
|
|
* r5 - word count
|
|
*
|
|
* Register usage:
|
|
* r0/r1 - scratch
|
|
* r2/r3 - write buffers
|
|
* r4 - current address
|
|
* r5 - end address
|
|
* r6 - mask (if unaligned)
|
|
* r7 - ata port
|
|
*/
|
|
|
|
_copy_write_sectors:
|
|
add r5, r5 /* words -> bytes */
|
|
add r4, r5 /* bytes -> end address */
|
|
add #-4, r5 /* adjust for offsets */
|
|
mov.l .ata_data, r7
|
|
|
|
mov r4, r0
|
|
tst #1, r0 /* 16-bit aligned ? */
|
|
bt .w_aligned /* yes, do word copy */
|
|
|
|
/* not 16-bit aligned */
|
|
mov #-1, r6 /* prepare a bit mask for high byte */
|
|
shll8 r6 /* r6 = 0xFFFFFF00 */
|
|
|
|
mov.b @r4+, r2 /* load (initial old second) first byte */
|
|
mov.w @r4+, r3 /* load (initial) first word */
|
|
bra .w_start_b
|
|
extu.b r2, r0 /* extend unsigned */
|
|
|
|
.align 2
|
|
.w_loop_b: /* main loop: copy 2 words in a row */
|
|
mov.w @r4+, r3 /* load first word (2+ round) */
|
|
extu.b r2, r0 /* put away low byte of second word (2+ round) */
|
|
and r6, r2 /* get high byte of second word (2+ round) */
|
|
or r1, r2 /* combine with low byte of old first word */
|
|
mov.w r2, @r7 /* write that */
|
|
.w_start_b:
|
|
cmp/hi r4, r5 /* check for end */
|
|
mov.w @r4+, r2 /* load second word */
|
|
extu.b r3, r1 /* put away low byte of first word */
|
|
and r6, r3 /* get high byte of first word */
|
|
or r0, r3 /* combine with high byte of old second word */
|
|
mov.w r3, @r7 /* write that */
|
|
bt .w_loop_b
|
|
/* 12 instructions for 2 copies, takes 14 clock cycles */
|
|
/* avg. 7 cycles per word */
|
|
|
|
/* the loop "overreads" 1 byte past the buffer end, however, the last */
|
|
/* byte is not written to disk */
|
|
and r6, r2 /* get high byte of last word */
|
|
or r1, r2 /* combine with low byte of old first word */
|
|
rts
|
|
mov.w r2, @r7 /* write last word */
|
|
|
|
/* 16-bit aligned, loop(load and write word) */
|
|
.w_aligned:
|
|
bra .w_start_w /* jump into loop after next instr. */
|
|
mov.w @r4+, r2 /* load first word (1st round) */
|
|
|
|
.align 2
|
|
.w_loop_w: /* main loop: copy 2 words in a row */
|
|
mov.w @r4+, r2 /* load first word (2+ round) */
|
|
swap.b r1, r0 /* swap second word (2+ round) */
|
|
mov.w r0, @r7 /* write second word (2+ round) */
|
|
.w_start_w:
|
|
cmp/hi r4, r5 /* check for end */
|
|
mov.w @r4+, r1 /* load second word */
|
|
swap.b r2, r0 /* swap first word */
|
|
mov.w r0, @r7 /* write first word */
|
|
bt .w_loop_w
|
|
/* 8 instructions for 2 copies, takes 10 clock cycles */
|
|
/* avg. 5 cycles per word */
|
|
|
|
swap.b r1, r0 /* swap second word (last round) */
|
|
rts
|
|
mov.w r0, @r7 /* and write it */
|
|
|
|
.w_end:
|
|
.size _copy_write_sectors,.w_end-_copy_write_sectors
|
|
|
|
.align 2
|
|
.ata_data:
|
|
.long 0x06104100 /* ATA data port */
|