rockbox/firmware/target/arm/ata-target.h
Bertrik Sikken 2dc2054319 Remove some unused declarations
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21010 a1c6a512-1295-4272-9138-f99709370657
2009-05-21 12:32:26 +00:00

83 lines
2.9 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifdef CPU_PP
/* primary channel */
#define ATA_DATA (*((volatile unsigned short*)(IDE_BASE + 0x1e0)))
#define ATA_ERROR (*((volatile unsigned char*)(IDE_BASE + 0x1e4)))
#define ATA_NSECTOR (*((volatile unsigned char*)(IDE_BASE + 0x1e8)))
#define ATA_SECTOR (*((volatile unsigned char*)(IDE_BASE + 0x1ec)))
#define ATA_LCYL (*((volatile unsigned char*)(IDE_BASE + 0x1f0)))
#define ATA_HCYL (*((volatile unsigned char*)(IDE_BASE + 0x1f4)))
#define ATA_SELECT (*((volatile unsigned char*)(IDE_BASE + 0x1f8)))
#define ATA_COMMAND (*((volatile unsigned char*)(IDE_BASE + 0x1fc)))
#define ATA_CONTROL (*((volatile unsigned char*)(IDE_BASE + 0x3f8)))
#define STATUS_BSY 0x80
#define STATUS_RDY 0x40
#define STATUS_DF 0x20
#define STATUS_DRQ 0x08
#define STATUS_ERR 0x01
#define ERROR_ABRT 0x04
#define WRITE_PATTERN1 0xa5
#define WRITE_PATTERN2 0x5a
#define WRITE_PATTERN3 0xaa
#define WRITE_PATTERN4 0x55
#define READ_PATTERN1 0xa5
#define READ_PATTERN2 0x5a
#define READ_PATTERN3 0xaa
#define READ_PATTERN4 0x55
#define READ_PATTERN1_MASK 0xff
#define READ_PATTERN2_MASK 0xff
#define READ_PATTERN3_MASK 0xff
#define READ_PATTERN4_MASK 0xff
#if (CONFIG_CPU == PP5002)
#define SET_REG(reg,val) do { reg = (val); \
while (!(IDE_CFG_STATUS & 0x40)); \
} while (0)
#define SET_16BITREG(reg,val) reg = (val)
/* Plain C reading and writing. See comment in ata-as-arm.S */
#elif defined CPU_PP502x
#define SET_REG(reg,val) reg = (val)
#define SET_16BITREG(reg,val) reg = (val)
/* asm optimized reading and writing */
#define ATA_OPTIMIZED_READING
#define ATA_OPTIMIZED_WRITING
void copy_read_sectors(unsigned char* buf, int wordcount);
void copy_write_sectors(const unsigned char* buf, int wordcount);
#endif /* CONFIG_CPU */
#endif
void ata_reset(void);
bool ata_is_coldstart(void);
void ata_device_init(void);