Rob Purchase 2fee08aff3 D2: Implement power-off by putting the PCF50606 to sleep (and reduce timeout to 10 ticks). Set PCF outputs on init as per OF. Fix erroneous BOOTDIR definition and make HW Info screen show some more useful info. ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17039 a1c6a512-1295-4272-9138-f99709370657		2008-04-08 20:43:04 +00:00
..
cowond2	D2: Implement power-off by putting the PCF50606 to sleep (and reduce timeout to 10 ticks). Set PCF outputs on init as per OF. Fix erroneous BOOTDIR definition and make HW Info screen show some more useful info.	2008-04-08 20:43:04 +00:00
adc-tcc780x.c	Make the TCC780x ADC driver work again in the bootloader.	2008-04-07 22:48:19 +00:00
app.lds	Split up app.lds to the respective target directories. The portalplayer devices replicate app.lds since their target tree doesn't follow a syntax typical to the newer arm targets - the portalplayers could be cleaned up further. boot.lds and plugin.lds still need to be cleaned up.	2008-03-13 03:48:23 +00:00
ata-nand-tcc780x.c	Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).	2008-04-06 04:34:57 +00:00
ata-target.h	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
boot.lds	split boot.lds and move it into the target tree	2008-03-27 23:58:03 +00:00
crt0.S	D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed).	2008-04-08 08:01:18 +00:00
debug-target.h	fix compiling of debug menu for tcc780x	2008-02-15 12:37:36 +00:00
debug-tcc780x.c	D2: Implement power-off by putting the PCF50606 to sleep (and reduce timeout to 10 ticks). Set PCF outputs on init as per OF. Fix erroneous BOOTDIR definition and make HW Info screen show some more useful info.	2008-04-08 20:43:04 +00:00
kernel-tcc780x.c	Enable tick IRQs on TCC780x. The main menu is now working on the D2.	2008-03-22 19:41:51 +00:00
system-target.h	Implement set_cpu_frequency() for TCC780x, but leave it disabled for now as switching can cause an occasional freeze. Reduce default speed from maximum to 48Mhz.	2008-03-29 20:40:38 +00:00
system-tcc780x.c	Introduce sanity check and extra nop to stabilise TCC780x set_cpu_frequency(). Re-enable HAVE_ADJUSTABLE_CPU_FREQ and kill a few warnings by setting HAVE_SW_TONE_CONTROLS.	2008-03-31 22:43:20 +00:00
timer-target.h	Initial Cowon D2 commit:	2008-01-14 22:04:48 +00:00
timer-tcc780x.c	Enable tick IRQs on TCC780x. The main menu is now working on the D2.	2008-03-22 19:41:51 +00:00