| .. |
|
adc.h
|
Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
|
2008-03-17 23:47:38 +00:00 |
|
as3514.h
|
Second part of FS#8272 - include charger status in Sansa debug menu.
|
2008-03-04 14:31:14 +00:00 |
|
ata.h
|
|
|
|
ata_idle_notify.h
|
Implement the playback event handling as a system-wide multi-purpose event system. Unified mpeg.c and playback.c audio event handling. Converted ata_idle_notify to use the new event handling system also.
|
2008-03-16 13:55:16 +00:00 |
|
ata_mmc.h
|
|
|
|
audio.h
|
Revert my earlier const madness, we'll keep the parameter lists simple.
|
2008-03-28 12:51:33 +00:00 |
|
audiohw.h
|
D2: Beginnings of a WM8985 driver (based on WM8758, using EQ1 and EQ5 as HW treble/bass). Untested, but harmless.
|
2008-04-09 22:20:04 +00:00 |
|
backlight.h
|
Greyscale library: * Implement linearisation curve flipping for 1st/2nd Gen iPods (LCD is inverted when backlight is on, so the curve is also inverted). This needs a slight extension of is_backlight_on() functionality in the core. * Thorough recalibration of all reachable greyscale targets, and #ifdef cleanup. * Reduce on-target gamma a bit, because the displayable contrast range of a monochrome/greyscale isn't that high.
|
2008-04-02 22:16:14 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.
|
2008-03-26 23:35:34 +00:00 |
|
config-c200.h
|
Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets.
|
2008-02-10 05:39:20 +00:00 |
|
config-cowond2.h
|
D2: Charging detection, plus basic PCF50606 interrupt handler.
|
2008-04-12 18:17:15 +00:00 |
|
config-creativezvm.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-e200.h
|
Oops. Didn't mean to commit this.
|
2008-03-04 14:40:04 +00:00 |
|
config-fmrecorder.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-gigabeat-s.h
|
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
|
2008-04-12 16:56:45 +00:00 |
|
config-gigabeat.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h10.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h10_5gb.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h100.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h120.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h300.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiom3.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiom5.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiox5.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ifp7xx.h
|
Oops forgot a few
|
2007-11-18 13:41:39 +00:00 |
|
config-ipod1g2g.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipod3g.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipod4g.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipodcolor.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipodmini.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipodmini2g.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipodnano.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipodvideo.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-logikdax.h
|
Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build.
|
2007-11-01 23:38:57 +00:00 |
|
config-mrobe100.h
|
m:robe 100
|
2008-04-03 11:08:38 +00:00 |
|
config-mrobe500.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ondiofm.h
|
Move a few #defines to target specific config files
|
2007-11-18 13:33:27 +00:00 |
|
config-ondiosp.h
|
Move a few #defines to target specific config files
|
2007-11-18 13:33:27 +00:00 |
|
config-player.h
|
Revert... stupid svn doesn't complain when passing -m twice :(
|
2008-04-02 22:45:23 +00:00 |
|
config-recorder.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-recorderv2.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-tpj1022.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config.h
|
Enable nocache sections using the linker. PP5022/4 must use SW_CORELOCK now with shared variables in DRAM (it seems swp(b) is at least partially broken on all PP or I'm doing something very wrong here :\). For core-shared data use SHAREDBSS/DATA_ATTR. NOCACHEBSS/DATA_ATTR is available whether or not single core is forced for static peripheral-DMA buffer allocation without use of the UNCACHED_ADDR macro in code and is likely useful on a non-PP target with a data cache (although not actually enabled in config.h and the .lds's in this commit).
|
2008-04-06 04:34:57 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
Initial Cowon D2 commit:
|
2008-01-14 22:04:48 +00:00 |
|
debug.h
|
|
|
|
disk.h
|
Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test.
|
2008-02-11 14:26:25 +00:00 |
|
dm320.h
|
Fix red + introduce new defines for DM320 targets
|
2008-04-09 15:47:33 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
Move encoder CPU boost control to the core. Allow CPU to sleep a bit when PCM buffer is empty and save some power. Codec API becomes incompatible so full updates! :)
|
2007-11-30 05:16:56 +00:00 |
|
events.h
|
Oops; I forgot one.
|
2008-04-03 17:56:04 +00:00 |
|
fat.h
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
|
2008-03-12 10:03:52 +00:00 |
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
|
|
|
font.h
|
Make checkwps compile again. Still more work is needed though, as checkwps is compiled to emulate an iPod Color - this needs changing to allow the LCD (and remote LCD) dimensions/depth to be specified on the commandline - the new %V tags are validated against the LCD characteristics
|
2008-03-25 21:09:58 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
Add some CACHEALIGN_* macros and a helper function to assist in aligning data and buffers on PortalPlayer processors to cache line boundaries. They're noops when PROC_NEED_CACHEALIGN isn't defined. Go safe and increase the value to 32 since I'm not sure yet if 16 is sufficient - changing that is a one-liner. Add helper to plugin API which will be needed shortly.
|
2007-11-08 05:17:20 +00:00 |
|
generic_i2c.h
|
|
|
|
hangul.h
|
|
|
|
hotswap.h
|
Arrrgh. Fix red now. :\
|
2008-03-12 11:23:42 +00:00 |
|
hwcompat.h
|
The iPod Video has the HW version at a different address in ROM.
|
2007-10-28 01:00:18 +00:00 |
|
i2c-coldfire.h
|
Correct the name of a flag. No functional change.
|
2008-03-18 22:48:26 +00:00 |
|
i2c-pp.h
|
Portal player i2c driver: More struct spinlock phaseout.
|
2007-11-12 07:58:54 +00:00 |
|
i2c.h
|
|
|
|
i2s.h
|
|
|
|
id3.h
|
Move a function to gwps-common.c because it belongs there
|
2008-04-12 13:25:16 +00:00 |
|
ifp_usb_serial.h
|
move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use
|
2008-03-02 18:16:24 +00:00 |
|
imx31l.h
|
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
|
2008-04-12 16:56:45 +00:00 |
|
isp1362.h
|
|
|
|
kernel.h
|
Change a #define constant that conflicts with a mingw definition. Change "WAIT_*" to "OBJ_WAIT_*".
|
2008-04-01 03:55:02 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.
|
2008-03-26 23:35:34 +00:00 |
|
lcd.h
|
Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.
|
2008-03-24 00:35:53 +00:00 |
|
led.h
|
|
|
|
logf.h
|
logf changes:
|
2007-10-24 22:06:36 +00:00 |
|
lv24020lp.h
|
|
|
|
m5636.h
|
|
|
|
mas.h
|
|
|
|
mas35xx.h
|
move {bass,treble,prescale}_table from sound.c to mas35xx.h
|
2007-11-15 23:32:56 +00:00 |
|
mc13783.h
|
Charger detection for Gigabeat S
|
2008-04-13 10:04:21 +00:00 |
|
mcf5249.h
|
|
|
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
|
|
|
mp3data.h
|
|
|
|
mpeg.h
|
Implement the playback event handling as a system-wide multi-purpose event system. Unified mpeg.c and playback.c audio event handling. Converted ata_idle_notify to use the new event handling system also.
|
2008-03-16 13:55:16 +00:00 |
|
panic.h
|
|
|
|
pcf5060x.h
|
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
|
2008-04-04 20:24:08 +00:00 |
|
pcf50605.h
|
Try to fix the case where Ipods would spuriously wake up even though no alarm had been set.
|
2007-09-28 15:09:54 +00:00 |
|
pcf50606.h
|
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
|
2008-04-04 20:24:08 +00:00 |
|
pcm.h
|
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
|
2007-10-06 22:27:27 +00:00 |
|
pcm_record.h
|
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
|
2007-10-06 22:27:27 +00:00 |
|
pcm_sampr.h
|
|
|
|
pnx0101.h
|
PNX0101: new register names and polishing support for Clock Generation Unit
|
2007-09-20 22:13:48 +00:00 |
|
power.h
|
e200/c200: Take advantage of mutex recursion for the tuner driver and dump the awkward *_nolock stuff.
|
2007-11-05 07:01:32 +00:00 |
|
powermgmt.h
|
Commit FS#8379 by Andree Buschmann. Disables much of the remaining unneeded hardware on PP50xx targets (Ipods, Sansa, H10s, etc) resulting in a large savings in power and consequent increase in battery life. Results vary from target to target and from codec to codec, but we now approach the OF runtime on several PP devices. For now, leave base CPU clock at 30MHz, although further savings is possible with some codecs if clock is reduced. Additionally, fix battery capacity on c200 and use my measurements to improve runtime estimation for Sandisk targets.
|
2008-02-10 05:39:20 +00:00 |
|
pp5002.h
|
Fix the PP5002 interrupt controller register definitions. The PP5002 interrupt controller matches the first half of the PP502x interrupt controller (the actual interrupt bits are different though).
|
2008-04-03 21:48:41 +00:00 |
|
pp5020.h
|
Refine information and macros for clock skipping. Not functional changes.
|
2008-04-12 23:55:30 +00:00 |
|
pp5024.h
|
comment typo fixes
|
2008-02-22 20:23:00 +00:00 |
|
profile.h
|
|
|
|
replaygain.h
|
Small ReplayGain cleanup. Move RVA2 specific code to id3.c and don't do the parsing via strings. Generalize parts of the code for later use by MPC. Make some local functions static. Add and update some comments for clarity.
|
2007-08-25 10:25:13 +00:00 |
|
rolo.h
|
|
|
|
rtc.h
|
Try and save some bytes, seeing as we already assumed LANG_ constants for month and weekday names are contiguous.
|
2007-10-24 15:34:36 +00:00 |
|
s1a0903x01.h
|
|
|
|
s3c2440.h
|
Fix the FRAME offset calculation on Gigabeat (m:robe 500 too?).
|
2007-10-23 11:34:11 +00:00 |
|
scroll_engine.h
|
Add viewport capabilities to all the LCD drivers, and adapt scrolling code. This is the firmware/ part of FS#8385 - the changes to the WPS code still need more work and will be committed at a later date. NOTE: There are no user-visible changes with this commit - just the infrastructure.
|
2008-01-07 20:34:11 +00:00 |
|
serial.h
|
|
|
|
sh7034.h
|
|
|
|
sound.h
|
move audiohw_postinit to audiohw.h
|
2008-02-12 20:40:53 +00:00 |
|
spdif.h
|
|
|
|
spi.h
|
spi is shared between the rtc and tsc2100
|
2007-10-01 05:27:43 +00:00 |
|
structec.h
|
|
|
|
sw_i2c.h
|
mrobe 100: real time clock (if anybody recognises the RTC chip let me know)
|
2008-02-03 18:15:39 +00:00 |
|
system.h
|
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
|
2008-03-25 02:34:12 +00:00 |
|
tcc77x.h
|
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.
|
2007-10-28 11:08:10 +00:00 |
|
tcc780x.h
|
D2: Charging detection, plus basic PCF50606 interrupt handler.
|
2008-04-12 18:17:15 +00:00 |
|
tea5767.h
|
|
|
|
thread.h
|
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
|
2008-04-12 16:56:45 +00:00 |
|
timer.h
|
Allow to select the core for running the user timer on portalplayer targets. * Incompatible plugin API change -> sorted API.
|
2008-04-04 19:38:46 +00:00 |
|
tlv320.h
|
move audiohw_enable_output to audiohw.h
|
2008-02-09 14:43:36 +00:00 |
|
tsc2100.h
|
Add some TSC2101 register definitions.
|
2007-11-20 05:13:07 +00:00 |
|
tuner.h
|
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
|
2007-08-14 22:06:23 +00:00 |
|
uda1380.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
usb.h
|
make the usb storage driver handle hotswap correctly, and exit the usb screen once all drives are "ejected" (either as a command from the OS or physically)
|
2008-03-10 20:55:24 +00:00 |
|
usb_ch9.h
|
fix alignment and packed-ness of USB structs
|
2008-02-29 18:33:54 +00:00 |
|
usb_core.h
|
left USB_SERIAL enabled by default yet again...
|
2008-03-10 21:01:03 +00:00 |
|
usb_drv.h
|
differentiate between connected and powered in usb_detect()
|
2008-03-20 20:01:28 +00:00 |
|
wm8721.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8731.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8751.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8758.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8975.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8985.h
|
D2: Beginnings of a WM8985 driver (based on WM8758, using EQ1 and EQ5 as HW treble/bass). Untested, but harmless.
|
2008-04-09 22:20:04 +00:00 |
|
wmcodec.h
|
|
|
8c5d552ebd