rockbox/firmware/target/arm/tcc77x/kernel-tcc77x.c
Daniel Stenberg 2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2008-06-28 18:10:04 +00:00

47 lines
1.6 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2008 by Rob Purchase
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "system.h"
#include "kernel.h"
#include "timer.h"
#include "thread.h"
void tick_start(unsigned int interval_in_ms)
{
/* configure Timer T-Clock to 2Mhz (clock source 4 (Xin) divided by 6) */
PCLKCFG4 = (1 << 31) | (4 << 28) | (5 << 16);
/* disable Timer0 */
TCFG0 &= ~1;
/* set counter reference value based on 1Mhz tick */
TREF0 = interval_in_ms * 1000;
/* Timer0 = reset to 0, divide=2, IRQ enable, enable (continuous) */
TCFG0 = (1<<8) | (0<<4) | (1<<3) | 1;
/* Unmask timer IRQ */
IEN |= TIMER0_IRQ_MASK;
}
/* NB: Since we are using a single timer IRQ, tick tasks are dispatched as
part of the central timer IRQ processing in timer-tcc77x.c */