a0d630f3de
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21929 a1c6a512-1295-4272-9138-f99709370657
442 lines
10 KiB
C
442 lines
10 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Rockbox driver for Sansa View LCDs
|
|
*
|
|
* Copyright (c) 2009 Robert Keevil
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include <string.h>
|
|
#include "cpu.h"
|
|
#include "system.h"
|
|
#include "backlight-target.h"
|
|
#include "lcd.h"
|
|
|
|
#include "bitmaps/rockboxlogo.h"
|
|
|
|
/* Power and display status */
|
|
static bool power_on = false; /* Is the power turned on? */
|
|
static bool display_on SHAREDBSS_ATTR = false; /* Is the display turned on? */
|
|
static unsigned lcd_yuv_options SHAREDBSS_ATTR = 0;
|
|
static int lcd_type;
|
|
|
|
#define LCD_DATA_OUT_GPIO GPIOH_OUTPUT_VAL
|
|
#define LCD_DATA_OUT_PIN 4
|
|
|
|
#define LCD_CLOCK_GPIO GPIOH_OUTPUT_VAL
|
|
#define LCD_CLOCK_PIN 6
|
|
|
|
#define LCD_CS_GPIO GPIOH_OUTPUT_VAL
|
|
#define LCD_CS_PIN 7
|
|
|
|
#ifdef BOOTLOADER
|
|
static void lcd_init_gpio(void)
|
|
{
|
|
/* BOOT: 0x5CC8
|
|
OF: 0x88284 */
|
|
|
|
outl(inl(0x70000010) | 0xFC000000, 0x70000010);
|
|
outl(inl(0x70000014) | 0xC300000, 0x70000014);
|
|
|
|
GPIOE_ENABLE = 0;
|
|
GPIOM_ENABLE &= ~0x3;
|
|
GPIOF_ENABLE = 0;
|
|
GPIOJ_ENABLE &= ~0x1a;
|
|
GPIOB_ENABLE &= ~0x8;
|
|
GPIOH_OUTPUT_VAL |= 0x80;
|
|
GPIOH_OUTPUT_EN |= 0x80;
|
|
GPIOH_ENABLE |= 0x80;
|
|
GPIOH_OUTPUT_VAL |= 0x40;
|
|
GPIOH_OUTPUT_EN |= 0x40;
|
|
GPIOH_ENABLE |= 0x40;
|
|
GPIOH_OUTPUT_VAL |= 0x20;
|
|
GPIOH_OUTPUT_EN |= 0x20;
|
|
GPIOH_ENABLE |= 0x20;
|
|
GPIOH_OUTPUT_VAL |= 0x10;
|
|
GPIOH_OUTPUT_EN |= 0x10;
|
|
GPIOH_ENABLE |= 0x10;
|
|
GPIOD_OUTPUT_VAL |= 0x1; /* backlight on */
|
|
GPIOD_ENABLE |= 0x1;
|
|
GPIOB_OUTPUT_VAL |= 0x4;
|
|
GPIOB_ENABLE |= 0x4;
|
|
GPIOB_OUTPUT_EN |= 0x4;
|
|
DEV_INIT2 = 0x40000000;
|
|
GPIOG_ENABLE |= 0x8;
|
|
GPIOG_OUTPUT_EN &= ~0x8;
|
|
|
|
if (GPIOG_INPUT_VAL & 0x8)
|
|
lcd_type = 1;
|
|
else
|
|
lcd_type = 0;
|
|
}
|
|
#endif
|
|
|
|
static void lcd_send_msg(unsigned char count, unsigned int data)
|
|
{
|
|
/* BOOT: 0x645C
|
|
OF: 0x88E90 */
|
|
int i;
|
|
|
|
LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN);
|
|
LCD_CS_GPIO &= ~(1 << LCD_CS_PIN);
|
|
|
|
for (i = count - 1; i >= 0; i--)
|
|
{
|
|
if (data & (1 << i))
|
|
{
|
|
LCD_DATA_OUT_GPIO &= ~(1 << LCD_DATA_OUT_PIN);
|
|
} else {
|
|
LCD_DATA_OUT_GPIO |= (1 << LCD_DATA_OUT_PIN);
|
|
}
|
|
LCD_CLOCK_GPIO &= ~(1 << LCD_CLOCK_PIN);
|
|
udelay(1);
|
|
LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN);
|
|
udelay(2);
|
|
}
|
|
|
|
LCD_CS_GPIO |= (1 << LCD_CS_PIN);
|
|
LCD_CLOCK_GPIO |= (1 << LCD_CLOCK_PIN);
|
|
udelay(1);
|
|
}
|
|
|
|
/*
|
|
static void lcd_write_reg(unsigned int reg, unsigned int data)
|
|
{
|
|
// OF: 0x6278 - referenced from 0x62840
|
|
|
|
// So far this function is always called with shift = 0x0 ?
|
|
// If so can remove and simplify
|
|
|
|
unsigned int cmd;
|
|
unsigned int shift = 0;
|
|
|
|
cmd = shift << 0x2;
|
|
cmd |= 0x70;
|
|
cmd = cmd << 0x10;
|
|
cmd |= reg;
|
|
lcd_send_msg(0x18, cmd);
|
|
|
|
cmd = shift << 0x2;
|
|
cmd |= 0x72;
|
|
cmd = cmd << 0x10;
|
|
cmd |= data;
|
|
lcd_send_msg(0x18, cmd);
|
|
|
|
// lcd_send_msg(0x70, reg);
|
|
// lcd_send_msg(0x72, data);
|
|
}
|
|
*/
|
|
|
|
static void lcd_write_cmd(unsigned int cmd)
|
|
{
|
|
lcd_send_msg(0x18, (0x700000 | cmd));
|
|
}
|
|
|
|
static void lcd_write_info(unsigned int data)
|
|
{
|
|
lcd_send_msg(0x18, (0x720000 | data));
|
|
}
|
|
|
|
static void lcd_write_reg(unsigned int cmd, unsigned int data)
|
|
{
|
|
lcd_write_cmd(cmd);
|
|
lcd_write_info(data);
|
|
}
|
|
|
|
void lcd_reset(void)
|
|
{
|
|
/* BOOT: 0x623C
|
|
OF: 0x88BDC */
|
|
|
|
GPIOB_OUTPUT_VAL |= 0x4;
|
|
udelay(1000);
|
|
GPIOB_OUTPUT_VAL &= ~0x4;
|
|
udelay(10000);
|
|
GPIOB_OUTPUT_VAL |= 0x4;
|
|
udelay(50000);
|
|
}
|
|
|
|
/* Run the powerup sequence for the driver IC */
|
|
static void lcd_power_on(void)
|
|
{
|
|
lcd_reset();
|
|
/* OF: 0x5DC0 *
|
|
* r2: cmd *
|
|
* r3: data */
|
|
lcd_write_reg(0xE5, 0x8000);
|
|
lcd_write_reg(0x0, 0x1);
|
|
lcd_write_reg(0x1, 0x100);
|
|
lcd_write_reg(0x2, 0x700);
|
|
lcd_write_reg(0x3, 0x1230);
|
|
lcd_write_reg(0x4, 0x0);
|
|
lcd_write_reg(0x8, 0x408);
|
|
lcd_write_reg(0x9, 0x0);
|
|
lcd_write_reg(0xa, 0x0);
|
|
lcd_write_reg(0xd, 0x0);
|
|
lcd_write_reg(0xf, 0x2);
|
|
lcd_write_reg(0x10, 0x0);
|
|
lcd_write_reg(0x11, 0x0);
|
|
lcd_write_reg(0x12, 0x0);
|
|
lcd_write_reg(0x13, 0x0);
|
|
sleep(HZ/5);
|
|
lcd_write_reg(0x10, 0x17B0);
|
|
lcd_write_reg(0x11, 0x7);
|
|
sleep(HZ/20);
|
|
lcd_write_reg(0x12, 0x13c);
|
|
sleep(HZ/20);
|
|
|
|
/* BOOT: BNE 0x5fb2 */
|
|
|
|
if (lcd_type == 0)
|
|
{
|
|
lcd_write_reg(0x13, 0x1700);
|
|
lcd_write_reg(0x29, 0x10);
|
|
sleep(HZ/10);
|
|
lcd_write_reg(0x20, 0x0);
|
|
lcd_write_reg(0x21, 0x0);
|
|
|
|
lcd_write_reg(0x30, 0x7);
|
|
lcd_write_reg(0x31, 0x403);
|
|
lcd_write_reg(0x32, 0x400);
|
|
lcd_write_reg(0x35, 0x3);
|
|
lcd_write_reg(0x36, 0xF07);
|
|
lcd_write_reg(0x37, 0x606);
|
|
lcd_write_reg(0x38, 0x106);
|
|
lcd_write_reg(0x39, 0x7);
|
|
}
|
|
else
|
|
{
|
|
lcd_write_reg(0x13, 0x1800);
|
|
lcd_write_reg(0x29, 0x13);
|
|
sleep(HZ/10);
|
|
lcd_write_reg(0x20, 0x0);
|
|
lcd_write_reg(0x21, 0x0);
|
|
|
|
lcd_write_reg(0x30, 0x2);
|
|
lcd_write_reg(0x31, 0x606);
|
|
lcd_write_reg(0x32, 0x501);
|
|
lcd_write_reg(0x35, 0x206);
|
|
lcd_write_reg(0x36, 0x504);
|
|
lcd_write_reg(0x37, 0x707);
|
|
lcd_write_reg(0x38, 0x306);
|
|
lcd_write_reg(0x39, 0x9);
|
|
}
|
|
|
|
/* BOOT: 0x6066 */
|
|
lcd_write_reg(0x3c, 0x700);
|
|
lcd_write_reg(0x3d, 0x700);
|
|
|
|
lcd_write_reg(0x50, 0x0);
|
|
lcd_write_reg(0x51, 0xef); /* 239 - LCD_WIDTH */
|
|
lcd_write_reg(0x52, 0x0);
|
|
lcd_write_reg(0x53, 0x13f); /* 319 - LCD_HEIGHT */
|
|
|
|
/* BOOT: b 0x6114 */
|
|
lcd_write_reg(0x60, 0x2700);
|
|
lcd_write_reg(0x61, 0x1);
|
|
lcd_write_reg(0x6a, 0x0);
|
|
|
|
lcd_write_reg(0x80, 0x0);
|
|
lcd_write_reg(0x81, 0x0);
|
|
lcd_write_reg(0x82, 0x0);
|
|
lcd_write_reg(0x83, 0x0);
|
|
lcd_write_reg(0x84, 0x0);
|
|
lcd_write_reg(0x85, 0x0);
|
|
|
|
/* BOOT: 0x61A8 */
|
|
lcd_write_reg(0x90, 0x10);
|
|
lcd_write_reg(0x92, 0x0);
|
|
lcd_write_reg(0x93, 0x3);
|
|
lcd_write_reg(0x95, 0x110);
|
|
lcd_write_reg(0x97, 0x0);
|
|
lcd_write_reg(0x98, 0x0);
|
|
|
|
lcd_write_reg(0xc, 0x110);
|
|
lcd_write_reg(0x7, 0x173);
|
|
sleep(HZ/10);
|
|
|
|
power_on = true;
|
|
}
|
|
|
|
/* unknown 01 and 02 - sleep or enable on and off funcs? */
|
|
void unknown01(void)
|
|
{
|
|
/* BOOT: 0x62C4
|
|
OF: 0x88CA0 */
|
|
|
|
lcd_write_reg(0x10, 0x17B0);
|
|
udelay(100);
|
|
lcd_write_reg(0x7, 0x173);
|
|
}
|
|
|
|
void unknown02(void)
|
|
{
|
|
/* BOOT: 0x6308
|
|
OF: 0x88D0C */
|
|
|
|
lcd_write_reg(0x7, 0x160);
|
|
lcd_write_reg(0x10, 0x17B1);
|
|
}
|
|
|
|
void unknown03(bool r0)
|
|
{
|
|
/* BOOT: 0x6410
|
|
OF: 0x88E30 */
|
|
|
|
if (r0)
|
|
GPIOJ_ENABLE &= ~0x2;
|
|
else
|
|
{
|
|
GPIOJ_ENABLE |= 0x2;
|
|
GPIOJ_OUTPUT_EN |= 0x2;
|
|
GPIOJ_OUTPUT_VAL &= ~0x02;
|
|
}
|
|
}
|
|
|
|
/* Run the display on sequence for the driver IC */
|
|
static void lcd_display_on(void)
|
|
{
|
|
display_on = true;
|
|
}
|
|
|
|
|
|
#if defined(HAVE_LCD_ENABLE) || defined(HAVE_LCD_SLEEP)
|
|
bool lcd_active(void)
|
|
{
|
|
return display_on;
|
|
}
|
|
|
|
/* Turn off visible display operations */
|
|
static void lcd_display_off(void)
|
|
{
|
|
display_on = false;
|
|
}
|
|
#endif
|
|
|
|
void lcd_init_device(void)
|
|
{
|
|
|
|
#ifdef BOOTLOADER /* Bother at all to do this again? */
|
|
/* Init GPIO ports */
|
|
lcd_init_gpio();
|
|
lcd_power_on();
|
|
lcd_display_on();
|
|
#else
|
|
|
|
power_on = true;
|
|
display_on = true;
|
|
|
|
lcd_set_invert_display(false);
|
|
lcd_set_flip(false);
|
|
#endif
|
|
}
|
|
|
|
#if defined(HAVE_LCD_ENABLE)
|
|
void lcd_enable(bool on)
|
|
{
|
|
(void)on;
|
|
}
|
|
#endif
|
|
|
|
#if defined(HAVE_LCD_SLEEP)
|
|
void lcd_sleep(void)
|
|
{
|
|
|
|
}
|
|
#endif
|
|
|
|
void lcd_update(void)
|
|
{
|
|
const fb_data *addr;
|
|
|
|
addr = &lcd_framebuffer[LCD_HEIGHT][LCD_WIDTH];
|
|
|
|
lcd_write_reg(0x20, 0x0);
|
|
lcd_write_reg(0x21, 0x0);
|
|
|
|
int i,j;
|
|
for(i=0; i < LCD_HEIGHT; i++)
|
|
{
|
|
for(j=0; j < LCD_WIDTH; j++)
|
|
{
|
|
lcd_write_reg(0x22, *addr);
|
|
addr++;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Update a fraction of the display. */
|
|
void lcd_update_rect(int x, int y, int width, int height)
|
|
{
|
|
(void)x;
|
|
(void)y;
|
|
(void)width;
|
|
(void)height;
|
|
lcd_update();
|
|
}
|
|
|
|
|
|
/*** hardware configuration ***/
|
|
|
|
void lcd_set_contrast(int val)
|
|
{
|
|
(void)val;
|
|
}
|
|
|
|
void lcd_set_invert_display(bool yesno)
|
|
{
|
|
(void)yesno;
|
|
}
|
|
|
|
/* turn the display upside down (call lcd_update() afterwards) */
|
|
void lcd_set_flip(bool yesno)
|
|
{
|
|
(void)yesno;
|
|
}
|
|
|
|
/* Blitting functions */
|
|
|
|
void lcd_yuv_set_options(unsigned options)
|
|
{
|
|
lcd_yuv_options = options;
|
|
}
|
|
|
|
/* Line write helper function for lcd_yuv_blit. Write two lines of yuv420. */
|
|
extern void lcd_write_yuv420_lines(fb_data *dst,
|
|
unsigned char const * const src[3],
|
|
int width,
|
|
int stride);
|
|
extern void lcd_write_yuv420_lines_odither(fb_data *dst,
|
|
unsigned char const * const src[3],
|
|
int width,
|
|
int stride,
|
|
int x_screen, /* To align dither pattern */
|
|
int y_screen);
|
|
|
|
void lcd_blit_yuv(unsigned char * const src[3],
|
|
int src_x, int src_y, int stride,
|
|
int x, int y, int width, int height)
|
|
{
|
|
(void)src;
|
|
(void)src_x;
|
|
(void)src_y;
|
|
(void)stride;
|
|
(void)x;
|
|
(void)y;
|
|
(void)width;
|
|
(void)height;
|
|
}
|