7cbf70cbf2
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16443 a1c6a512-1295-4272-9138-f99709370657
2464 lines
74 KiB
C
2464 lines
74 KiB
C
/***************************************************************************
|
||
* __________ __ ___.
|
||
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
||
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
||
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
||
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
||
* \/ \/ \/ \/ \/
|
||
* $Id$
|
||
*
|
||
* Copyright (C) 2002 Heikki Hannikainen
|
||
*
|
||
* All files in this archive are subject to the GNU General Public License.
|
||
* See the file COPYING in the source tree root for full license agreement.
|
||
*
|
||
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
||
* KIND, either express or implied.
|
||
*
|
||
****************************************************************************/
|
||
|
||
#include "config.h"
|
||
#include <stdio.h>
|
||
#include <stdbool.h>
|
||
#include <string.h>
|
||
#include "lcd.h"
|
||
#include "menu.h"
|
||
#include "debug_menu.h"
|
||
#include "kernel.h"
|
||
#include "sprintf.h"
|
||
#include "action.h"
|
||
#include "debug.h"
|
||
#include "thread.h"
|
||
#include "powermgmt.h"
|
||
#include "system.h"
|
||
#include "font.h"
|
||
#include "audio.h"
|
||
#include "mp3_playback.h"
|
||
#include "settings.h"
|
||
#include "list.h"
|
||
#include "statusbar.h"
|
||
#include "dir.h"
|
||
#include "panic.h"
|
||
#include "screens.h"
|
||
#include "misc.h"
|
||
#include "splash.h"
|
||
#include "dircache.h"
|
||
#ifdef HAVE_TAGCACHE
|
||
#include "tagcache.h"
|
||
#endif
|
||
#include "lcd-remote.h"
|
||
#include "crc32.h"
|
||
#include "logf.h"
|
||
#ifndef SIMULATOR
|
||
#include "disk.h"
|
||
#include "adc.h"
|
||
#include "power.h"
|
||
#include "usb.h"
|
||
#include "rtc.h"
|
||
#include "ata.h"
|
||
#include "fat.h"
|
||
#include "mas.h"
|
||
#include "eeprom_24cxx.h"
|
||
#if defined(HAVE_MMC) || defined(HAVE_HOTSWAP)
|
||
#include "ata_mmc.h"
|
||
#endif
|
||
#if CONFIG_TUNER
|
||
#include "tuner.h"
|
||
#include "radio.h"
|
||
#endif
|
||
#endif
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#include "scrollbar.h"
|
||
#include "peakmeter.h"
|
||
#endif
|
||
#include "logfdisp.h"
|
||
#if CONFIG_CODEC == SWCODEC
|
||
#include "pcmbuf.h"
|
||
#include "buffering.h"
|
||
#if defined(HAVE_SPDIF_OUT) || defined(HAVE_SPDIF_IN)
|
||
#include "spdif.h"
|
||
#endif
|
||
#endif
|
||
#ifdef IRIVER_H300_SERIES
|
||
#include "pcf50606.h" /* for pcf50606_read */
|
||
#endif
|
||
#ifdef IAUDIO_X5
|
||
#include "ds2411.h"
|
||
#endif
|
||
#include "hwcompat.h"
|
||
#include "button.h"
|
||
#if CONFIG_RTC == RTC_PCF50605
|
||
#include "pcf50605.h"
|
||
#endif
|
||
|
||
#if CONFIG_CPU == DM320 || CONFIG_CPU == S3C2440 || CONFIG_CPU == TCC7801
|
||
#include "debug-target.h"
|
||
#endif
|
||
|
||
/*---------------------------------------------------*/
|
||
/* SPECIAL DEBUG STUFF */
|
||
/*---------------------------------------------------*/
|
||
extern struct thread_entry threads[MAXTHREADS];
|
||
|
||
static char thread_status_char(unsigned status)
|
||
{
|
||
static const char thread_status_chars[THREAD_NUM_STATES+1] =
|
||
{
|
||
[0 ... THREAD_NUM_STATES] = '?',
|
||
[STATE_RUNNING] = 'R',
|
||
[STATE_BLOCKED] = 'B',
|
||
[STATE_SLEEPING] = 'S',
|
||
[STATE_BLOCKED_W_TMO] = 'T',
|
||
[STATE_FROZEN] = 'F',
|
||
[STATE_KILLED] = 'K',
|
||
};
|
||
|
||
#if NUM_CORES > 1
|
||
if (status == STATE_BUSY) /* Not a state index */
|
||
return '.';
|
||
#endif
|
||
|
||
if (status > THREAD_NUM_STATES)
|
||
status = THREAD_NUM_STATES;
|
||
|
||
return thread_status_chars[status];
|
||
}
|
||
|
||
static char* threads_getname(int selected_item, void * data, char *buffer)
|
||
{
|
||
(void)data;
|
||
struct thread_entry *thread;
|
||
char name[32];
|
||
|
||
#if NUM_CORES > 1
|
||
if (selected_item < (int)NUM_CORES)
|
||
{
|
||
snprintf(buffer, MAX_PATH, "Idle (%d): %2d%%", selected_item,
|
||
idle_stack_usage(selected_item));
|
||
return buffer;
|
||
}
|
||
|
||
selected_item -= NUM_CORES;
|
||
#endif
|
||
|
||
thread = &threads[selected_item];
|
||
|
||
if (thread->state == STATE_KILLED)
|
||
{
|
||
snprintf(buffer, MAX_PATH, "%2d: ---", selected_item);
|
||
return buffer;
|
||
}
|
||
|
||
thread_get_name(name, 32, thread);
|
||
|
||
snprintf(buffer, MAX_PATH,
|
||
"%2d: " IF_COP("(%d) ") "%c%c " IF_PRIO("%d ") "%2d%% %s",
|
||
selected_item,
|
||
IF_COP(thread->core,)
|
||
#ifdef HAVE_SCHEDULER_BOOSTCTRL
|
||
(thread->boosted) ? '+' :
|
||
#endif
|
||
((thread->state == STATE_RUNNING) ? '*' : ' '),
|
||
thread_status_char(thread->state),
|
||
IF_PRIO(thread->priority,)
|
||
thread_stack_usage(thread), name);
|
||
|
||
return buffer;
|
||
}
|
||
static int dbg_threads_action_callback(int action, struct gui_synclist *lists)
|
||
{
|
||
(void)lists;
|
||
#ifdef ROCKBOX_HAS_LOGF
|
||
if (action == ACTION_STD_OK)
|
||
{
|
||
int selpos = gui_synclist_get_sel_pos(lists);
|
||
#if NUM_CORES > 1
|
||
if (selpos >= NUM_CORES)
|
||
remove_thread(&threads[selpos - NUM_CORES]);
|
||
#else
|
||
remove_thread(&threads[selpos]);
|
||
#endif
|
||
return ACTION_REDRAW;
|
||
}
|
||
#endif /* ROCKBOX_HAS_LOGF */
|
||
if (action == ACTION_NONE)
|
||
action = ACTION_REDRAW;
|
||
return action;
|
||
}
|
||
/* Test code!!! */
|
||
static bool dbg_os(void)
|
||
{
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, IF_COP("Core and ") "Stack usage:",
|
||
#if NUM_CORES == 1
|
||
MAXTHREADS,
|
||
#else
|
||
MAXTHREADS+NUM_CORES,
|
||
#endif
|
||
NULL);
|
||
#ifndef ROCKBOX_HAS_LOGF
|
||
info.hide_selection = true;
|
||
#endif
|
||
info.action_callback = dbg_threads_action_callback;
|
||
info.get_name = threads_getname;
|
||
return simplelist_show_list(&info);
|
||
}
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#if CONFIG_CODEC != SWCODEC
|
||
#ifndef SIMULATOR
|
||
static bool dbg_audio_thread(void)
|
||
{
|
||
char buf[32];
|
||
struct audio_debug d;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
if (action_userabort(HZ/5))
|
||
return false;
|
||
|
||
audio_get_debugdata(&d);
|
||
|
||
lcd_clear_display();
|
||
|
||
snprintf(buf, sizeof(buf), "read: %x", d.audiobuf_read);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, sizeof(buf), "write: %x", d.audiobuf_write);
|
||
lcd_puts(0, 1, buf);
|
||
snprintf(buf, sizeof(buf), "swap: %x", d.audiobuf_swapwrite);
|
||
lcd_puts(0, 2, buf);
|
||
snprintf(buf, sizeof(buf), "playing: %d", d.playing);
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, sizeof(buf), "playable: %x", d.playable_space);
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, sizeof(buf), "unswapped: %x", d.unswapped_space);
|
||
lcd_puts(0, 5, buf);
|
||
|
||
/* Playable space left */
|
||
gui_scrollbar_draw(&screens[SCREEN_MAIN],0, 6*8, 112, 4, d.audiobuflen, 0,
|
||
d.playable_space, HORIZONTAL);
|
||
|
||
/* Show the watermark limit */
|
||
gui_scrollbar_draw(&screens[SCREEN_MAIN],0, 6*8+4, 112, 4, d.audiobuflen, 0,
|
||
d.low_watermark_level, HORIZONTAL);
|
||
|
||
snprintf(buf, sizeof(buf), "wm: %x - %x",
|
||
d.low_watermark_level, d.lowest_watermark_level);
|
||
lcd_puts(0, 7, buf);
|
||
|
||
lcd_update();
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !SIMULATOR */
|
||
#else /* CONFIG_CODEC == SWCODEC */
|
||
extern size_t filebuflen;
|
||
/* This is a size_t, but call it a long so it puts a - when it's bad. */
|
||
|
||
static unsigned int ticks, boost_ticks;
|
||
|
||
static void dbg_audio_task(void)
|
||
{
|
||
#ifndef SIMULATOR
|
||
if(FREQ > CPUFREQ_NORMAL)
|
||
boost_ticks++;
|
||
#endif
|
||
|
||
ticks++;
|
||
}
|
||
|
||
static bool dbg_buffering_thread(void)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
int line;
|
||
bool done = false;
|
||
size_t bufused;
|
||
size_t bufsize = pcmbuf_get_bufsize();
|
||
int pcmbufdescs = pcmbuf_descs();
|
||
struct buffering_debug d;
|
||
|
||
ticks = boost_ticks = 0;
|
||
|
||
tick_add_task(dbg_audio_task);
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
while(!done)
|
||
{
|
||
button = get_action(CONTEXT_STD,HZ/5);
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_NEXT:
|
||
audio_next();
|
||
break;
|
||
case ACTION_STD_PREV:
|
||
audio_prev();
|
||
break;
|
||
case ACTION_STD_CANCEL:
|
||
done = true;
|
||
break;
|
||
}
|
||
|
||
buffering_get_debugdata(&d);
|
||
|
||
line = 0;
|
||
lcd_clear_display();
|
||
|
||
bufused = bufsize - pcmbuf_free();
|
||
|
||
snprintf(buf, sizeof(buf), "pcm: %7ld/%7ld", (long) bufused, (long) bufsize);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
gui_scrollbar_draw(&screens[SCREEN_MAIN],0, line*8, LCD_WIDTH, 6,
|
||
bufsize, 0, bufused, HORIZONTAL);
|
||
line++;
|
||
|
||
snprintf(buf, sizeof(buf), "alloc: %8ld/%8ld", audio_filebufused(),
|
||
(long) filebuflen);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#if LCD_HEIGHT > 80
|
||
gui_scrollbar_draw(&screens[SCREEN_MAIN],0, line*8, LCD_WIDTH, 6,
|
||
filebuflen, 0, audio_filebufused(), HORIZONTAL);
|
||
line++;
|
||
|
||
snprintf(buf, sizeof(buf), "real: %8ld/%8ld", (long)d.buffered_data,
|
||
(long)filebuflen);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
gui_scrollbar_draw(&screens[SCREEN_MAIN],0, line*8, LCD_WIDTH, 6,
|
||
filebuflen, 0, (long)d.buffered_data, HORIZONTAL);
|
||
line++;
|
||
#endif
|
||
|
||
snprintf(buf, sizeof(buf), "usefl: %8ld/%8ld", (long)(d.useful_data),
|
||
(long)filebuflen);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#if LCD_HEIGHT > 80
|
||
gui_scrollbar_draw(&screens[SCREEN_MAIN],0, line*8, LCD_WIDTH, 6,
|
||
filebuflen, 0, d.useful_data, HORIZONTAL);
|
||
line++;
|
||
#endif
|
||
|
||
snprintf(buf, sizeof(buf), "data_rem: %ld", (long)d.data_rem);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "track count: %2d", audio_track_count());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "handle count: %d", (int)d.num_handles);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#ifndef SIMULATOR
|
||
snprintf(buf, sizeof(buf), "cpu freq: %3dMHz",
|
||
(int)((FREQ + 500000) / 1000000));
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
if (ticks > 0)
|
||
{
|
||
snprintf(buf, sizeof(buf), "boost ratio: %3d%%",
|
||
boost_ticks * 100 / ticks);
|
||
lcd_puts(0, line++, buf);
|
||
}
|
||
|
||
snprintf(buf, sizeof(buf), "pcmbufdesc: %2d/%2d",
|
||
pcmbuf_used_descs(), pcmbufdescs);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
}
|
||
|
||
tick_remove_task(dbg_audio_task);
|
||
|
||
return false;
|
||
}
|
||
#endif /* CONFIG_CODEC */
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
|
||
|
||
#if (CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE))
|
||
/* Tool function to read the flash manufacturer and type, if available.
|
||
Only chips which could be reprogrammed in system will return values.
|
||
(The mode switch addresses vary between flash manufacturers, hence addr1/2) */
|
||
/* In IRAM to avoid problems when running directly from Flash */
|
||
static bool dbg_flash_id(unsigned* p_manufacturer, unsigned* p_device,
|
||
unsigned addr1, unsigned addr2)
|
||
ICODE_ATTR __attribute__((noinline));
|
||
static bool dbg_flash_id(unsigned* p_manufacturer, unsigned* p_device,
|
||
unsigned addr1, unsigned addr2)
|
||
|
||
{
|
||
unsigned not_manu, not_id; /* read values before switching to ID mode */
|
||
unsigned manu, id; /* read values when in ID mode */
|
||
|
||
#if CONFIG_CPU == SH7034
|
||
volatile unsigned char* flash = (unsigned char*)0x2000000; /* flash mapping */
|
||
#elif defined(CPU_COLDFIRE)
|
||
volatile unsigned short* flash = (unsigned short*)0; /* flash mapping */
|
||
#endif
|
||
int old_level; /* saved interrupt level */
|
||
|
||
not_manu = flash[0]; /* read the normal content */
|
||
not_id = flash[1]; /* should be 'A' (0x41) and 'R' (0x52) from the "ARCH" marker */
|
||
|
||
/* disable interrupts, prevent any stray flash access */
|
||
old_level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
||
|
||
flash[addr1] = 0xAA; /* enter command mode */
|
||
flash[addr2] = 0x55;
|
||
flash[addr1] = 0x90; /* ID command */
|
||
/* Atmel wants 20ms pause here */
|
||
/* sleep(HZ/50); no sleeping possible while interrupts are disabled */
|
||
|
||
manu = flash[0]; /* read the IDs */
|
||
id = flash[1];
|
||
|
||
flash[0] = 0xF0; /* reset flash (back to normal read mode) */
|
||
/* Atmel wants 20ms pause here */
|
||
/* sleep(HZ/50); no sleeping possible while interrupts are disabled */
|
||
|
||
set_irq_level(old_level); /* enable interrupts again */
|
||
|
||
/* I assume success if the obtained values are different from
|
||
the normal flash content. This is not perfectly bulletproof, they
|
||
could theoretically be the same by chance, causing us to fail. */
|
||
if (not_manu != manu || not_id != id) /* a value has changed */
|
||
{
|
||
*p_manufacturer = manu; /* return the results */
|
||
*p_device = id;
|
||
return true; /* success */
|
||
}
|
||
return false; /* fail */
|
||
}
|
||
#endif /* (CONFIG_CPU == SH7034 || CPU_COLDFIRE) */
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef CPU_PP
|
||
static int perfcheck(void)
|
||
{
|
||
int result;
|
||
|
||
asm (
|
||
"mrs r2, CPSR \n"
|
||
"orr r0, r2, #0xc0 \n" /* disable IRQ and FIQ */
|
||
"msr CPSR_c, r0 \n"
|
||
"mov %[res], #0 \n"
|
||
"ldr r0, [%[timr]] \n"
|
||
"add r0, r0, %[tmo] \n"
|
||
"1: \n"
|
||
"add %[res], %[res], #1 \n"
|
||
"ldr r1, [%[timr]] \n"
|
||
"cmp r1, r0 \n"
|
||
"bmi 1b \n"
|
||
"msr CPSR_c, r2 \n" /* reset IRQ and FIQ state */
|
||
:
|
||
[res]"=&r"(result)
|
||
:
|
||
[timr]"r"(&USEC_TIMER),
|
||
[tmo]"r"(
|
||
#if CONFIG_CPU == PP5002
|
||
16000
|
||
#else /* PP5020/5022/5024 */
|
||
10226
|
||
#endif
|
||
)
|
||
:
|
||
"r0", "r1", "r2"
|
||
);
|
||
return result;
|
||
}
|
||
#endif
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
static bool dbg_hw_info(void)
|
||
{
|
||
#if CONFIG_CPU == SH7034
|
||
char buf[32];
|
||
int bitmask = HW_MASK;
|
||
int rom_version = ROM_VERSION;
|
||
unsigned manu, id; /* flash IDs */
|
||
bool got_id; /* flag if we managed to get the flash IDs */
|
||
unsigned rom_crc = 0xffffffff; /* CRC32 of the boot ROM */
|
||
bool has_bootrom; /* flag for boot ROM present */
|
||
int oldmode; /* saved memory guard mode */
|
||
|
||
oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */
|
||
|
||
/* get flash ROM type */
|
||
got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */
|
||
if (!got_id)
|
||
got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */
|
||
|
||
/* check if the boot ROM area is a flash mirror */
|
||
has_bootrom = (memcmp((char*)0, (char*)0x02000000, 64*1024) != 0);
|
||
if (has_bootrom) /* if ROM and Flash different */
|
||
{
|
||
/* calculate CRC16 checksum of boot ROM */
|
||
rom_crc = crc_32((unsigned char*)0x0000, 64*1024, 0xffffffff);
|
||
}
|
||
|
||
system_memory_guard(oldmode); /* re-enable memory guard */
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, 0, "[Hardware info]");
|
||
|
||
snprintf(buf, 32, "ROM: %d.%02d", rom_version/100, rom_version%100);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
snprintf(buf, 32, "Mask: 0x%04x", bitmask);
|
||
lcd_puts(0, 2, buf);
|
||
|
||
if (got_id)
|
||
snprintf(buf, 32, "Flash: M=%02x D=%02x", manu, id);
|
||
else
|
||
snprintf(buf, 32, "Flash: M=?? D=??"); /* unknown, sorry */
|
||
lcd_puts(0, 3, buf);
|
||
|
||
if (has_bootrom)
|
||
{
|
||
if (rom_crc == 0x56DBA4EE) /* known Version 1 */
|
||
snprintf(buf, 32, "Boot ROM: V1");
|
||
else
|
||
snprintf(buf, 32, "ROMcrc: 0x%08x", rom_crc);
|
||
}
|
||
else
|
||
{
|
||
snprintf(buf, 32, "Boot ROM: none");
|
||
}
|
||
lcd_puts(0, 4, buf);
|
||
|
||
lcd_update();
|
||
|
||
while (!(action_userabort(TIMEOUT_BLOCK)));
|
||
|
||
#elif CONFIG_CPU == MCF5249 || CONFIG_CPU == MCF5250
|
||
char buf[32];
|
||
unsigned manu, id; /* flash IDs */
|
||
int got_id; /* flag if we managed to get the flash IDs */
|
||
int oldmode; /* saved memory guard mode */
|
||
int line = 0;
|
||
|
||
oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */
|
||
|
||
/* get flash ROM type */
|
||
got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */
|
||
if (!got_id)
|
||
got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */
|
||
|
||
system_memory_guard(oldmode); /* re-enable memory guard */
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, line++, "[Hardware info]");
|
||
|
||
if (got_id)
|
||
snprintf(buf, 32, "Flash: M=%04x D=%04x", manu, id);
|
||
else
|
||
snprintf(buf, 32, "Flash: M=???? D=????"); /* unknown, sorry */
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#ifdef IAUDIO_X5
|
||
{
|
||
struct ds2411_id id;
|
||
|
||
lcd_puts(0, ++line, "Serial Number:");
|
||
|
||
got_id = ds2411_read_id(&id);
|
||
|
||
if (got_id == DS2411_OK)
|
||
{
|
||
snprintf(buf, 32, " FC=%02x", (unsigned)id.family_code);
|
||
lcd_puts(0, ++line, buf);
|
||
snprintf(buf, 32, " ID=%02X %02X %02X %02X %02X %02X",
|
||
(unsigned)id.uid[0], (unsigned)id.uid[1], (unsigned)id.uid[2],
|
||
(unsigned)id.uid[3], (unsigned)id.uid[4], (unsigned)id.uid[5]);
|
||
lcd_puts(0, ++line, buf);
|
||
snprintf(buf, 32, " CRC=%02X", (unsigned)id.crc);
|
||
}
|
||
else
|
||
{
|
||
snprintf(buf, 32, "READ ERR=%d", got_id);
|
||
}
|
||
|
||
lcd_puts(0, ++line, buf);
|
||
}
|
||
#endif
|
||
|
||
lcd_update();
|
||
|
||
while (!(action_userabort(TIMEOUT_BLOCK)));
|
||
|
||
#elif defined(CPU_PP502x)
|
||
int line = 0;
|
||
char buf[32];
|
||
char pp_version[] = { (PP_VER2 >> 24) & 0xff, (PP_VER2 >> 16) & 0xff,
|
||
(PP_VER2 >> 8) & 0xff, (PP_VER2) & 0xff,
|
||
(PP_VER1 >> 24) & 0xff, (PP_VER1 >> 16) & 0xff,
|
||
(PP_VER1 >> 8) & 0xff, (PP_VER1) & 0xff, '\0' };
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, line++, "[Hardware info]");
|
||
|
||
#ifdef IPOD_ARCH
|
||
snprintf(buf, sizeof(buf), "HW rev: 0x%08lx", IPOD_HW_REVISION);
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
#ifdef IPOD_COLOR
|
||
extern int lcd_type; /* Defined in lcd-colornano.c */
|
||
|
||
snprintf(buf, sizeof(buf), "LCD type: %d", lcd_type);
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
snprintf(buf, sizeof(buf), "PP version: %s", pp_version);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Est. clock (kHz): %d", perfcheck());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
|
||
while (!(action_userabort(TIMEOUT_BLOCK)));
|
||
|
||
#elif CONFIG_CPU == PP5002
|
||
int line = 0;
|
||
char buf[32];
|
||
char pp_version[] = { (PP_VER4 >> 8) & 0xff, PP_VER4 & 0xff,
|
||
(PP_VER3 >> 8) & 0xff, PP_VER3 & 0xff,
|
||
(PP_VER2 >> 8) & 0xff, PP_VER2 & 0xff,
|
||
(PP_VER1 >> 8) & 0xff, PP_VER1 & 0xff, '\0' };
|
||
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, line++, "[Hardware info]");
|
||
|
||
#ifdef IPOD_ARCH
|
||
snprintf(buf, sizeof(buf), "HW rev: 0x%08lx", IPOD_HW_REVISION);
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
snprintf(buf, sizeof(buf), "PP version: %s", pp_version);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Est. clock (kHz): %d", perfcheck());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
|
||
while (!(action_userabort(TIMEOUT_BLOCK)));
|
||
#else
|
||
/* Define this function in your target tree */
|
||
return __dbg_hw_info();
|
||
#endif /* CONFIG_CPU */
|
||
return false;
|
||
}
|
||
#else /* !HAVE_LCD_BITMAP */
|
||
static bool dbg_hw_info(void)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
int currval = 0;
|
||
int rom_version = ROM_VERSION;
|
||
unsigned manu, id; /* flash IDs */
|
||
bool got_id; /* flag if we managed to get the flash IDs */
|
||
unsigned rom_crc = 0xffffffff; /* CRC32 of the boot ROM */
|
||
bool has_bootrom; /* flag for boot ROM present */
|
||
int oldmode; /* saved memory guard mode */
|
||
|
||
oldmode = system_memory_guard(MEMGUARD_NONE); /* disable memory guard */
|
||
|
||
/* get flash ROM type */
|
||
got_id = dbg_flash_id(&manu, &id, 0x5555, 0x2AAA); /* try SST, Atmel, NexFlash */
|
||
if (!got_id)
|
||
got_id = dbg_flash_id(&manu, &id, 0x555, 0x2AA); /* try AMD, Macronix */
|
||
|
||
/* check if the boot ROM area is a flash mirror */
|
||
has_bootrom = (memcmp((char*)0, (char*)0x02000000, 64*1024) != 0);
|
||
if (has_bootrom) /* if ROM and Flash different */
|
||
{
|
||
/* calculate CRC16 checksum of boot ROM */
|
||
rom_crc = crc_32((unsigned char*)0x0000, 64*1024, 0xffffffff);
|
||
}
|
||
|
||
system_memory_guard(oldmode); /* re-enable memory guard */
|
||
|
||
lcd_clear_display();
|
||
|
||
lcd_puts(0, 0, "[HW Info]");
|
||
while(1)
|
||
{
|
||
switch(currval)
|
||
{
|
||
case 0:
|
||
snprintf(buf, 32, "ROM: %d.%02d",
|
||
rom_version/100, rom_version%100);
|
||
break;
|
||
case 1:
|
||
if (got_id)
|
||
snprintf(buf, 32, "Flash:%02x,%02x", manu, id);
|
||
else
|
||
snprintf(buf, 32, "Flash:??,??"); /* unknown, sorry */
|
||
break;
|
||
case 2:
|
||
if (has_bootrom)
|
||
{
|
||
if (rom_crc == 0x56DBA4EE) /* known Version 1 */
|
||
snprintf(buf, 32, "BootROM: V1");
|
||
else if (rom_crc == 0x358099E8)
|
||
snprintf(buf, 32, "BootROM: V2");
|
||
/* alternative boot ROM found in one single player so far */
|
||
else
|
||
snprintf(buf, 32, "R: %08x", rom_crc);
|
||
}
|
||
else
|
||
snprintf(buf, 32, "BootROM: no");
|
||
}
|
||
|
||
lcd_puts(0, 1, buf);
|
||
lcd_update();
|
||
|
||
button = get_action(CONTEXT_SETTINGS,TIMEOUT_BLOCK);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
return false;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
currval--;
|
||
if(currval < 0)
|
||
currval = 2;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
currval++;
|
||
if(currval > 2)
|
||
currval = 0;
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !HAVE_LCD_BITMAP */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifndef SIMULATOR
|
||
static char* dbg_partitions_getname(int selected_item, void * data, char *buffer)
|
||
{
|
||
(void)data;
|
||
int partition = selected_item/2;
|
||
struct partinfo* p = disk_partinfo(partition);
|
||
if (selected_item%2)
|
||
{
|
||
snprintf(buffer, MAX_PATH, " T:%x %ld MB", p->type, p->size / 2048);
|
||
}
|
||
else
|
||
{
|
||
snprintf(buffer, MAX_PATH, "P%d: S:%lx", partition, p->start);
|
||
}
|
||
return buffer;
|
||
}
|
||
|
||
bool dbg_partitions(void)
|
||
{
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, "Partition Info", 4, NULL);
|
||
info.selection_size = 2;
|
||
info.hide_selection = true;
|
||
info.get_name = dbg_partitions_getname;
|
||
return simplelist_show_list(&info);
|
||
}
|
||
#endif
|
||
|
||
#if defined(CPU_COLDFIRE) && defined(HAVE_SPDIF_OUT)
|
||
static bool dbg_spdif(void)
|
||
{
|
||
char buf[128];
|
||
int line;
|
||
unsigned int control;
|
||
int x;
|
||
char *s;
|
||
int category;
|
||
int generation;
|
||
unsigned int interruptstat;
|
||
bool valnogood, symbolerr, parityerr;
|
||
bool done = false;
|
||
bool spdif_src_on;
|
||
int spdif_source = spdif_get_output_source(&spdif_src_on);
|
||
spdif_set_output_source(AUDIO_SRC_SPDIF IF_SPDIF_POWER_(, true));
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
#ifdef HAVE_SPDIF_POWER
|
||
spdif_power_enable(true); /* We need SPDIF power for both sending & receiving */
|
||
#endif
|
||
|
||
while (!done)
|
||
{
|
||
line = 0;
|
||
|
||
control = EBU1RCVCCHANNEL1;
|
||
interruptstat = INTERRUPTSTAT;
|
||
INTERRUPTCLEAR = 0x03c00000;
|
||
|
||
valnogood = (interruptstat & 0x01000000)?true:false;
|
||
symbolerr = (interruptstat & 0x00800000)?true:false;
|
||
parityerr = (interruptstat & 0x00400000)?true:false;
|
||
|
||
snprintf(buf, sizeof(buf), "Val: %s Sym: %s Par: %s",
|
||
valnogood?"--":"OK",
|
||
symbolerr?"--":"OK",
|
||
parityerr?"--":"OK");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "Status word: %08x", (int)control);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
line++;
|
||
|
||
x = control >> 31;
|
||
snprintf(buf, sizeof(buf), "PRO: %d (%s)",
|
||
x, x?"Professional":"Consumer");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 30) & 1;
|
||
snprintf(buf, sizeof(buf), "Audio: %d (%s)",
|
||
x, x?"Non-PCM":"PCM");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 29) & 1;
|
||
snprintf(buf, sizeof(buf), "Copy: %d (%s)",
|
||
x, x?"Permitted":"Inhibited");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 27) & 7;
|
||
switch(x)
|
||
{
|
||
case 0:
|
||
s = "None";
|
||
break;
|
||
case 1:
|
||
s = "50/15us";
|
||
break;
|
||
default:
|
||
s = "Reserved";
|
||
break;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Preemphasis: %d (%s)", x, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 24) & 3;
|
||
snprintf(buf, sizeof(buf), "Mode: %d", x);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
category = (control >> 17) & 127;
|
||
switch(category)
|
||
{
|
||
case 0x00:
|
||
s = "General";
|
||
break;
|
||
case 0x40:
|
||
s = "Audio CD";
|
||
break;
|
||
default:
|
||
s = "Unknown";
|
||
}
|
||
snprintf(buf, sizeof(buf), "Category: 0x%02x (%s)", category, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 16) & 1;
|
||
generation = x;
|
||
if(((category & 0x70) == 0x10) ||
|
||
((category & 0x70) == 0x40) ||
|
||
((category & 0x78) == 0x38))
|
||
{
|
||
generation = !generation;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Generation: %d (%s)",
|
||
x, generation?"Original":"No ind.");
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 12) & 15;
|
||
snprintf(buf, sizeof(buf), "Source: %d", x);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 8) & 15;
|
||
switch(x)
|
||
{
|
||
case 0:
|
||
s = "Unspecified";
|
||
break;
|
||
case 8:
|
||
s = "A (Left)";
|
||
break;
|
||
case 4:
|
||
s = "B (Right)";
|
||
break;
|
||
default:
|
||
s = "";
|
||
break;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Channel: %d (%s)", x, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 4) & 15;
|
||
switch(x)
|
||
{
|
||
case 0:
|
||
s = "44.1kHz";
|
||
break;
|
||
case 0x4:
|
||
s = "48kHz";
|
||
break;
|
||
case 0xc:
|
||
s = "32kHz";
|
||
break;
|
||
}
|
||
snprintf(buf, sizeof(buf), "Frequency: %d (%s)", x, s);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
x = (control >> 2) & 3;
|
||
snprintf(buf, sizeof(buf), "Clock accuracy: %d", x);
|
||
lcd_puts(0, line++, buf);
|
||
line++;
|
||
|
||
#ifndef SIMULATOR
|
||
snprintf(buf, sizeof(buf), "Measured freq: %ldHz",
|
||
spdif_measure_frequency());
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
lcd_update();
|
||
|
||
if (action_userabort(HZ/10))
|
||
break;
|
||
}
|
||
|
||
spdif_set_output_source(spdif_source IF_SPDIF_POWER_(, spdif_src_on));
|
||
|
||
#ifdef HAVE_SPDIF_POWER
|
||
spdif_power_enable(global_settings.spdif_enable);
|
||
#endif
|
||
|
||
return false;
|
||
}
|
||
#endif /* CPU_COLDFIRE */
|
||
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_LCD_BITMAP
|
||
/* button definitions */
|
||
#if (CONFIG_KEYPAD == IRIVER_H100_PAD) || \
|
||
(CONFIG_KEYPAD == IRIVER_H300_PAD)
|
||
# define DEBUG_CANCEL BUTTON_OFF
|
||
|
||
#elif CONFIG_KEYPAD == RECORDER_PAD
|
||
# define DEBUG_CANCEL BUTTON_OFF
|
||
|
||
#elif CONFIG_KEYPAD == ONDIO_PAD
|
||
# define DEBUG_CANCEL BUTTON_MENU
|
||
|
||
#elif (CONFIG_KEYPAD == IPOD_1G2G_PAD) || \
|
||
(CONFIG_KEYPAD == IPOD_3G_PAD) || \
|
||
(CONFIG_KEYPAD == IPOD_4G_PAD)
|
||
# define DEBUG_CANCEL BUTTON_MENU
|
||
|
||
#elif CONFIG_KEYPAD == IRIVER_IFP7XX_PAD
|
||
# define DEBUG_CANCEL BUTTON_PLAY
|
||
|
||
#elif CONFIG_KEYPAD == IAUDIO_X5M5_PAD
|
||
# define DEBUG_CANCEL BUTTON_REC
|
||
|
||
#elif (CONFIG_KEYPAD == IRIVER_H10_PAD)
|
||
# define DEBUG_CANCEL BUTTON_REW
|
||
|
||
#elif (CONFIG_KEYPAD == MROBE100_PAD)
|
||
# define DEBUG_CANCEL BUTTON_MENU
|
||
|
||
#elif (CONFIG_KEYPAD == SANSA_E200_PAD) || \
|
||
(CONFIG_KEYPAD == SANSA_C200_PAD)
|
||
# define DEBUG_CANCEL BUTTON_LEFT
|
||
#endif /* key definitions */
|
||
|
||
/* Test code!!! */
|
||
bool dbg_ports(void)
|
||
{
|
||
#if CONFIG_CPU == SH7034
|
||
char buf[32];
|
||
int adc_battery_voltage, adc_battery_level;
|
||
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
snprintf(buf, 32, "PADR: %04x", (unsigned short)PADR);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, 32, "PBDR: %04x", (unsigned short)PBDR);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
snprintf(buf, 32, "AN0: %03x AN4: %03x", adc_read(0), adc_read(4));
|
||
lcd_puts(0, 2, buf);
|
||
snprintf(buf, 32, "AN1: %03x AN5: %03x", adc_read(1), adc_read(5));
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, 32, "AN2: %03x AN6: %03x", adc_read(2), adc_read(6));
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, 32, "AN3: %03x AN7: %03x", adc_read(3), adc_read(7));
|
||
lcd_puts(0, 5, buf);
|
||
|
||
battery_read_info(&adc_battery_voltage, &adc_battery_level);
|
||
snprintf(buf, 32, "Batt: %d.%03dV %d%% ", adc_battery_voltage / 1000,
|
||
adc_battery_voltage % 1000, adc_battery_level);
|
||
lcd_puts(0, 6, buf);
|
||
|
||
lcd_update();
|
||
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
||
return false;
|
||
}
|
||
#elif defined(CPU_COLDFIRE)
|
||
unsigned int gpio_out;
|
||
unsigned int gpio1_out;
|
||
unsigned int gpio_read;
|
||
unsigned int gpio1_read;
|
||
unsigned int gpio_function;
|
||
unsigned int gpio1_function;
|
||
unsigned int gpio_enable;
|
||
unsigned int gpio1_enable;
|
||
int adc_buttons, adc_remote;
|
||
int adc_battery_voltage, adc_battery_level;
|
||
char buf[128];
|
||
int line;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
gpio_read = GPIO_READ;
|
||
gpio1_read = GPIO1_READ;
|
||
gpio_out = GPIO_OUT;
|
||
gpio1_out = GPIO1_OUT;
|
||
gpio_function = GPIO_FUNCTION;
|
||
gpio1_function = GPIO1_FUNCTION;
|
||
gpio_enable = GPIO_ENABLE;
|
||
gpio1_enable = GPIO1_ENABLE;
|
||
|
||
snprintf(buf, sizeof(buf), "GPIO_READ: %08x", gpio_read);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_OUT: %08x", gpio_out);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_FUNCTION: %08x", gpio_function);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_ENABLE: %08x", gpio_enable);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "GPIO1_READ: %08x", gpio1_read);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO1_OUT: %08x", gpio1_out);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO1_FUNCTION: %08x", gpio1_function);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO1_ENABLE: %08x", gpio1_enable);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
adc_buttons = adc_read(ADC_BUTTONS);
|
||
adc_remote = adc_read(ADC_REMOTE);
|
||
battery_read_info(&adc_battery_voltage, &adc_battery_level);
|
||
#if defined(IAUDIO_X5) || defined(IAUDIO_M5) || defined(IRIVER_H300_SERIES)
|
||
snprintf(buf, sizeof(buf), "ADC_BUTTONS (%c): %02x",
|
||
button_scan_enabled() ? '+' : '-', adc_buttons);
|
||
#else
|
||
snprintf(buf, sizeof(buf), "ADC_BUTTONS: %02x", adc_buttons);
|
||
#endif
|
||
lcd_puts(0, line++, buf);
|
||
#if defined(IAUDIO_X5) || defined(IAUDIO_M5)
|
||
snprintf(buf, sizeof(buf), "ADC_REMOTE (%c): %02x",
|
||
remote_detect() ? '+' : '-', adc_remote);
|
||
#else
|
||
snprintf(buf, sizeof(buf), "ADC_REMOTE: %02x", adc_remote);
|
||
#endif
|
||
lcd_puts(0, line++, buf);
|
||
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|
||
snprintf(buf, sizeof(buf), "ADC_REMOTEDETECT: %02x",
|
||
adc_read(ADC_REMOTEDETECT));
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
snprintf(buf, 32, "Batt: %d.%03dV %d%% ", adc_battery_voltage / 1000,
|
||
adc_battery_voltage % 1000, adc_battery_level);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#if defined(IRIVER_H100_SERIES) || defined(IRIVER_H300_SERIES)
|
||
snprintf(buf, sizeof(buf), "remotetype: %d", remote_type());
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
|
||
lcd_update();
|
||
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
||
return false;
|
||
}
|
||
|
||
#elif defined(CPU_PP502x)
|
||
|
||
char buf[128];
|
||
int line;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
lcd_puts(0, line++, "GPIO STATES:");
|
||
snprintf(buf, sizeof(buf), "A: %02x E: %02x I: %02x",
|
||
(unsigned int)GPIOA_INPUT_VAL,
|
||
(unsigned int)GPIOE_INPUT_VAL,
|
||
(unsigned int)GPIOI_INPUT_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "B: %02x F: %02x J: %02x",
|
||
(unsigned int)GPIOB_INPUT_VAL,
|
||
(unsigned int)GPIOF_INPUT_VAL,
|
||
(unsigned int)GPIOJ_INPUT_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "C: %02x G: %02x K: %02x",
|
||
(unsigned int)GPIOC_INPUT_VAL,
|
||
(unsigned int)GPIOG_INPUT_VAL,
|
||
(unsigned int)GPIOK_INPUT_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "D: %02x H: %02x L: %02x",
|
||
(unsigned int)GPIOD_INPUT_VAL,
|
||
(unsigned int)GPIOH_INPUT_VAL,
|
||
(unsigned int)GPIOL_INPUT_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
line++;
|
||
snprintf(buf, sizeof(buf), "GPO32_VAL: %08lx", GPO32_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPO32_EN: %08lx", GPO32_ENABLE);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DEV_EN: %08lx", DEV_EN);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DEV_EN2: %08lx", DEV_EN2);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DEV_EN3: %08lx", inl(0x60006044));
|
||
lcd_puts(0, line++, buf); /* to be verified */
|
||
snprintf(buf, sizeof(buf), "DEV_INIT1: %08lx", DEV_INIT1);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DEV_INIT2: %08lx", DEV_INIT2);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
#if defined(IRIVER_H10) || defined(IRIVER_H10_5GB)
|
||
line++;
|
||
snprintf(buf, sizeof(buf), "BATT: %03x UNK1: %03x",
|
||
adc_read(ADC_BATTERY), adc_read(ADC_UNKNOWN_1));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "REM: %03x PAD: %03x",
|
||
adc_read(ADC_REMOTE), adc_read(ADC_SCROLLPAD));
|
||
lcd_puts(0, line++, buf);
|
||
#elif defined(SANSA_E200)
|
||
line++;
|
||
snprintf(buf, sizeof(buf), "ADC_BVDD: %4d", adc_read(ADC_BVDD));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_RTCSUP: %4d", adc_read(ADC_RTCSUP));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_UVDD: %4d", adc_read(ADC_UVDD));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_CHG_IN: %4d", adc_read(ADC_CHG_IN));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_CVDD: %4d", adc_read(ADC_CVDD));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_BATTEMP: %4d", adc_read(ADC_BATTEMP));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_MICSUP1: %4d", adc_read(ADC_MICSUP1));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_MICSUP2: %4d", adc_read(ADC_MICSUP2));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_VBE1: %4d", adc_read(ADC_VBE1));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_VBE2: %4d", adc_read(ADC_VBE2));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_I_MICSUP1:%4d", adc_read(ADC_I_MICSUP1));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_I_MICSUP2:%4d", adc_read(ADC_I_MICSUP2));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "ADC_VBAT: %4d", adc_read(ADC_VBAT));
|
||
lcd_puts(0, line++, buf);
|
||
#endif
|
||
lcd_update();
|
||
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
||
return false;
|
||
}
|
||
|
||
#elif CONFIG_CPU == PP5002
|
||
char buf[128];
|
||
int line;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_clear_display();
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
snprintf(buf, sizeof(buf), "GPIO_A: %02x GPIO_B: %02x",
|
||
(unsigned int)GPIOA_INPUT_VAL, (unsigned int)GPIOB_INPUT_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "GPIO_C: %02x GPIO_D: %02x",
|
||
(unsigned int)GPIOC_INPUT_VAL, (unsigned int)GPIOD_INPUT_VAL);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "DEV_EN: %08lx", DEV_EN);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "CLOCK_ENABLE: %08lx", CLOCK_ENABLE);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "CLOCK_SOURCE: %08lx", CLOCK_SOURCE);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "PLL_CONTROL: %08lx", PLL_CONTROL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "PLL_DIV: %08lx", PLL_DIV);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "PLL_MULT: %08lx", PLL_MULT);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "TIMING1_CTL: %08lx", TIMING1_CTL);
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "TIMING2_CTL: %08lx", TIMING2_CTL);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
||
return false;
|
||
}
|
||
#else
|
||
return __dbg_ports();
|
||
#endif /* CPU */
|
||
return false;
|
||
}
|
||
#else /* !HAVE_LCD_BITMAP */
|
||
bool dbg_ports(void)
|
||
{
|
||
char buf[32];
|
||
int button;
|
||
int adc_battery_voltage;
|
||
int currval = 0;
|
||
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
switch(currval)
|
||
{
|
||
case 0:
|
||
snprintf(buf, 32, "PADR: %04x", (unsigned short)PADR);
|
||
break;
|
||
case 1:
|
||
snprintf(buf, 32, "PBDR: %04x", (unsigned short)PBDR);
|
||
break;
|
||
case 2:
|
||
snprintf(buf, 32, "AN0: %03x", adc_read(0));
|
||
break;
|
||
case 3:
|
||
snprintf(buf, 32, "AN1: %03x", adc_read(1));
|
||
break;
|
||
case 4:
|
||
snprintf(buf, 32, "AN2: %03x", adc_read(2));
|
||
break;
|
||
case 5:
|
||
snprintf(buf, 32, "AN3: %03x", adc_read(3));
|
||
break;
|
||
case 6:
|
||
snprintf(buf, 32, "AN4: %03x", adc_read(4));
|
||
break;
|
||
case 7:
|
||
snprintf(buf, 32, "AN5: %03x", adc_read(5));
|
||
break;
|
||
case 8:
|
||
snprintf(buf, 32, "AN6: %03x", adc_read(6));
|
||
break;
|
||
case 9:
|
||
snprintf(buf, 32, "AN7: %03x", adc_read(7));
|
||
break;
|
||
break;
|
||
}
|
||
lcd_puts(0, 0, buf);
|
||
|
||
battery_read_info(&adc_battery_voltage, NULL);
|
||
snprintf(buf, 32, "Batt: %d.%03dV", adc_battery_voltage / 1000,
|
||
adc_battery_voltage % 1000);
|
||
lcd_puts(0, 1, buf);
|
||
lcd_update();
|
||
|
||
button = get_action(CONTEXT_SETTINGS,HZ/5);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_CANCEL:
|
||
return false;
|
||
|
||
case ACTION_SETTINGS_DEC:
|
||
currval--;
|
||
if(currval < 0)
|
||
currval = 9;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
currval++;
|
||
if(currval > 9)
|
||
currval = 0;
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !HAVE_LCD_BITMAP */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#if (CONFIG_RTC == RTC_PCF50605) && !defined(SIMULATOR)
|
||
static bool dbg_pcf(void)
|
||
{
|
||
char buf[128];
|
||
int line;
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
#endif
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
|
||
snprintf(buf, sizeof(buf), "DCDC1: %02x", pcf50605_read(0x1b));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCDC2: %02x", pcf50605_read(0x1c));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCDC3: %02x", pcf50605_read(0x1d));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCDC4: %02x", pcf50605_read(0x1e));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCDEC1: %02x", pcf50605_read(0x1f));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCDEC2: %02x", pcf50605_read(0x20));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCUDC1: %02x", pcf50605_read(0x21));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "DCUDC2: %02x", pcf50605_read(0x22));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "IOREGC: %02x", pcf50605_read(0x23));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "D1REGC: %02x", pcf50605_read(0x24));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "D2REGC: %02x", pcf50605_read(0x25));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "D3REGC: %02x", pcf50605_read(0x26));
|
||
lcd_puts(0, line++, buf);
|
||
snprintf(buf, sizeof(buf), "LPREG1: %02x", pcf50605_read(0x27));
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
if (button_get_w_tmo(HZ/10) == (DEBUG_CANCEL|BUTTON_REL))
|
||
{
|
||
return false;
|
||
}
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif
|
||
|
||
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
|
||
static bool dbg_cpufreq(void)
|
||
{
|
||
char buf[128];
|
||
int line;
|
||
int button;
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
#endif
|
||
lcd_clear_display();
|
||
|
||
while(1)
|
||
{
|
||
line = 0;
|
||
|
||
snprintf(buf, sizeof(buf), "Frequency: %ld", FREQ);
|
||
lcd_puts(0, line++, buf);
|
||
|
||
snprintf(buf, sizeof(buf), "boost_counter: %d", get_cpu_boost_counter());
|
||
lcd_puts(0, line++, buf);
|
||
|
||
lcd_update();
|
||
button = get_action(CONTEXT_STD,HZ/10);
|
||
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_PREV:
|
||
cpu_boost(true);
|
||
break;
|
||
|
||
case ACTION_STD_NEXT:
|
||
cpu_boost(false);
|
||
break;
|
||
|
||
case ACTION_STD_OK:
|
||
while (get_cpu_boost_counter() > 0)
|
||
cpu_boost(false);
|
||
set_cpu_frequency(CPUFREQ_DEFAULT);
|
||
break;
|
||
|
||
case ACTION_STD_CANCEL:
|
||
return false;
|
||
}
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif /* HAVE_ADJUSTABLE_CPU_FREQ */
|
||
|
||
#if defined(HAVE_TSC2100) && !defined(SIMULATOR)
|
||
#include "tsc2100.h"
|
||
char *itob(int n, int len)
|
||
{
|
||
static char binary[64];
|
||
int i,j;
|
||
for (i=1, j=0;i<=len;i++)
|
||
{
|
||
binary[j++] = n&(1<<(len-i))?'1':'0';
|
||
if (i%4 == 0)
|
||
binary[j++] = ' ';
|
||
}
|
||
binary[j] = '\0';
|
||
return binary;
|
||
}
|
||
static char* tsc2100_debug_getname(int selected_item, void * data, char *buffer)
|
||
{
|
||
int *page = (int*)data;
|
||
bool reserved = false;
|
||
switch (*page)
|
||
{
|
||
case 0:
|
||
if ((selected_item > 0x0a) ||
|
||
(selected_item == 0x04) ||
|
||
(selected_item == 0x08))
|
||
reserved = true;
|
||
break;
|
||
case 1:
|
||
if ((selected_item > 0x05) ||
|
||
(selected_item == 0x02))
|
||
reserved = true;
|
||
break;
|
||
case 2:
|
||
if (selected_item > 0x1e)
|
||
reserved = true;
|
||
break;
|
||
}
|
||
if (reserved)
|
||
snprintf(buffer, MAX_PATH, "%02x: RESERVED", selected_item);
|
||
else
|
||
snprintf(buffer, MAX_PATH, "%02x: %s", selected_item,
|
||
itob(tsc2100_readreg(*page, selected_item)&0xffff,16));
|
||
return buffer;
|
||
}
|
||
static int tsc2100debug_action_callback(int action, struct gui_synclist *lists)
|
||
{
|
||
int *page = (int*)lists->data;
|
||
if (action == ACTION_STD_OK)
|
||
{
|
||
*page = (*page+1)%3;
|
||
snprintf(lists->title, 32,
|
||
"tsc2100 registers - Page %d", *page);
|
||
return ACTION_REDRAW;
|
||
}
|
||
return action;
|
||
}
|
||
bool tsc2100_debug(void)
|
||
{
|
||
int page = 0;
|
||
char title[32] = "tsc2100 registers - Page 0";
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, title, 32, &page);
|
||
info.timeout = HZ/100;
|
||
info.get_name = tsc2100_debug_getname;
|
||
info.action_callback= tsc2100debug_action_callback;
|
||
return simplelist_show_list(&info);
|
||
}
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
#ifdef HAVE_LCD_BITMAP
|
||
/*
|
||
* view_battery() shows a automatically scaled graph of the battery voltage
|
||
* over time. Usable for estimating battery life / charging rate.
|
||
* The power_history array is updated in power_thread of powermgmt.c.
|
||
*/
|
||
|
||
#define BAT_LAST_VAL MIN(LCD_WIDTH, POWER_HISTORY_LEN)
|
||
#define BAT_YSPACE (LCD_HEIGHT - 20)
|
||
|
||
static bool view_battery(void)
|
||
{
|
||
int view = 0;
|
||
int i, x, y;
|
||
unsigned short maxv, minv;
|
||
char buf[32];
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while(1)
|
||
{
|
||
lcd_clear_display();
|
||
switch (view) {
|
||
case 0: /* voltage history graph */
|
||
/* Find maximum and minimum voltage for scaling */
|
||
minv = power_history[0];
|
||
maxv = minv + 1;
|
||
for (i = 1; i < BAT_LAST_VAL && power_history[i]; i++) {
|
||
if (power_history[i] > maxv)
|
||
maxv = power_history[i];
|
||
if (power_history[i] < minv)
|
||
minv = power_history[i];
|
||
}
|
||
|
||
snprintf(buf, 30, "Battery %d.%03d", power_history[0] / 1000,
|
||
power_history[0] % 1000);
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, 30, "scale %d.%03d-%d.%03dV",
|
||
minv / 1000, minv % 1000, maxv / 1000, maxv % 1000);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
x = 0;
|
||
for (i = BAT_LAST_VAL - 1; i >= 0; i--) {
|
||
y = (power_history[i] - minv) * BAT_YSPACE / (maxv - minv);
|
||
lcd_set_drawmode(DRMODE_SOLID|DRMODE_INVERSEVID);
|
||
lcd_vline(x, LCD_HEIGHT-1, 20);
|
||
lcd_set_drawmode(DRMODE_SOLID);
|
||
lcd_vline(x, LCD_HEIGHT-1,
|
||
MIN(MAX(LCD_HEIGHT-1 - y, 20), LCD_HEIGHT-1));
|
||
x++;
|
||
}
|
||
|
||
break;
|
||
|
||
case 1: /* status: */
|
||
lcd_puts(0, 0, "Power status:");
|
||
|
||
battery_read_info(&y, NULL);
|
||
snprintf(buf, 30, "Battery: %d.%03d V", y / 1000, y % 1000);
|
||
lcd_puts(0, 1, buf);
|
||
#ifdef ADC_EXT_POWER
|
||
y = (adc_read(ADC_EXT_POWER) * EXT_SCALE_FACTOR) / 1000;
|
||
snprintf(buf, 30, "External: %d.%03d V", y / 1000, y % 1000);
|
||
lcd_puts(0, 2, buf);
|
||
#endif
|
||
#if CONFIG_CHARGING
|
||
#if CONFIG_CHARGING == CHARGING_CONTROL
|
||
snprintf(buf, 30, "Chgr: %s %s",
|
||
charger_inserted() ? "present" : "absent",
|
||
charger_enabled ? "on" : "off");
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, 30, "short delta: %d", short_delta);
|
||
lcd_puts(0, 5, buf);
|
||
snprintf(buf, 30, "long delta: %d", long_delta);
|
||
lcd_puts(0, 6, buf);
|
||
lcd_puts(0, 7, power_message);
|
||
snprintf(buf, 30, "USB Inserted: %s",
|
||
usb_inserted() ? "yes" : "no");
|
||
lcd_puts(0, 8, buf);
|
||
#if defined IRIVER_H300_SERIES
|
||
snprintf(buf, 30, "USB Charging Enabled: %s",
|
||
usb_charging_enabled() ? "yes" : "no");
|
||
lcd_puts(0, 9, buf);
|
||
#endif
|
||
#else /* CONFIG_CHARGING != CHARGING_CONTROL */
|
||
#if defined IPOD_NANO || defined IPOD_VIDEO
|
||
int usb_pwr = (GPIOL_INPUT_VAL & 0x10)?true:false;
|
||
int ext_pwr = (GPIOL_INPUT_VAL & 0x08)?false:true;
|
||
int dock = (GPIOA_INPUT_VAL & 0x10)?true:false;
|
||
int charging = (GPIOB_INPUT_VAL & 0x01)?false:true;
|
||
int headphone= (GPIOA_INPUT_VAL & 0x80)?true:false;
|
||
|
||
snprintf(buf, 30, "USB pwr: %s",
|
||
usb_pwr ? "present" : "absent");
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, 30, "EXT pwr: %s",
|
||
ext_pwr ? "present" : "absent");
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, 30, "Battery: %s",
|
||
charging ? "charging" : (usb_pwr||ext_pwr) ? "charged" : "discharging");
|
||
lcd_puts(0, 5, buf);
|
||
snprintf(buf, 30, "Dock mode: %s",
|
||
dock ? "enabled" : "disabled");
|
||
lcd_puts(0, 6, buf);
|
||
snprintf(buf, 30, "Headphone: %s",
|
||
headphone ? "connected" : "disconnected");
|
||
lcd_puts(0, 7, buf);
|
||
#else
|
||
snprintf(buf, 30, "Charger: %s",
|
||
charger_inserted() ? "present" : "absent");
|
||
lcd_puts(0, 3, buf);
|
||
#endif
|
||
#endif /* CONFIG_CHARGING != CHARGING_CONTROL */
|
||
#endif /* CONFIG_CHARGING */
|
||
break;
|
||
|
||
case 2: /* voltage deltas: */
|
||
lcd_puts(0, 0, "Voltage deltas:");
|
||
|
||
for (i = 0; i <= 6; i++) {
|
||
y = power_history[i] - power_history[i+1];
|
||
snprintf(buf, 30, "-%d min: %s%d.%03d V", i,
|
||
(y < 0) ? "-" : "", ((y < 0) ? y * -1 : y) / 1000,
|
||
((y < 0) ? y * -1 : y ) % 1000);
|
||
lcd_puts(0, i+1, buf);
|
||
}
|
||
break;
|
||
|
||
case 3: /* remaining time estimation: */
|
||
|
||
#if CONFIG_CHARGING == CHARGING_CONTROL
|
||
snprintf(buf, 30, "charge_state: %d", charge_state);
|
||
lcd_puts(0, 0, buf);
|
||
|
||
snprintf(buf, 30, "Cycle time: %d m", powermgmt_last_cycle_startstop_min);
|
||
lcd_puts(0, 1, buf);
|
||
|
||
snprintf(buf, 30, "Lvl@cyc st: %d%%", powermgmt_last_cycle_level);
|
||
lcd_puts(0, 2, buf);
|
||
|
||
snprintf(buf, 30, "P=%2d I=%2d", pid_p, pid_i);
|
||
lcd_puts(0, 3, buf);
|
||
|
||
snprintf(buf, 30, "Trickle sec: %d/60", trickle_sec);
|
||
lcd_puts(0, 4, buf);
|
||
#endif /* CONFIG_CHARGING == CHARGING_CONTROL */
|
||
|
||
snprintf(buf, 30, "Last PwrHist: %d.%03dV",
|
||
power_history[0] / 1000,
|
||
power_history[0] % 1000);
|
||
lcd_puts(0, 5, buf);
|
||
|
||
snprintf(buf, 30, "battery level: %d%%", battery_level());
|
||
lcd_puts(0, 6, buf);
|
||
|
||
snprintf(buf, 30, "Est. remain: %d m", battery_time());
|
||
lcd_puts(0, 7, buf);
|
||
break;
|
||
}
|
||
|
||
lcd_update();
|
||
|
||
switch(get_action(CONTEXT_SETTINGS,HZ/2))
|
||
{
|
||
case ACTION_SETTINGS_DEC:
|
||
if (view)
|
||
view--;
|
||
break;
|
||
|
||
case ACTION_SETTINGS_INC:
|
||
if (view < 3)
|
||
view++;
|
||
break;
|
||
|
||
case ACTION_STD_CANCEL:
|
||
return false;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
#endif
|
||
|
||
#ifndef SIMULATOR
|
||
#if defined(HAVE_MMC) || defined(HAVE_HOTSWAP)
|
||
#if defined(HAVE_MMC)
|
||
#define CARDTYPE "MMC"
|
||
#else
|
||
#define CARDTYPE "microSD"
|
||
#endif
|
||
static int disk_callback(int btn, struct gui_synclist *lists)
|
||
{
|
||
tCardInfo *card;
|
||
int *cardnum = (int*)lists->data;
|
||
unsigned char card_name[7];
|
||
unsigned char pbuf[32];
|
||
char *title = lists->title;
|
||
static const unsigned char i_vmin[] = { 0, 1, 5, 10, 25, 35, 60, 100 };
|
||
static const unsigned char i_vmax[] = { 1, 5, 10, 25, 35, 45, 80, 200 };
|
||
static const unsigned char *kbit_units[] = { "kBit/s", "MBit/s", "GBit/s" };
|
||
static const unsigned char *nsec_units[] = { "ns", "<EFBFBD>s", "ms" };
|
||
static const char *spec_vers[] = { "1.0-1.2", "1.4", "2.0-2.2",
|
||
"3.1-3.31", "4.0" };
|
||
if ((btn == ACTION_STD_OK) || (btn == SYS_FS_CHANGED) || (btn == ACTION_REDRAW))
|
||
{
|
||
if (btn == ACTION_STD_OK)
|
||
{
|
||
*cardnum ^= 0x1; /* change cards */
|
||
}
|
||
|
||
simplelist_set_line_count(0);
|
||
|
||
card = card_get_info(*cardnum);
|
||
|
||
if (card->initialized > 0)
|
||
{
|
||
card_name[6] = '\0';
|
||
strncpy(card_name, ((unsigned char*)card->cid) + 3, 6);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"%s Rev %d.%d", card_name,
|
||
(int) card_extract_bits(card->cid, 72, 4),
|
||
(int) card_extract_bits(card->cid, 76, 4));
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Prod: %d/%d",
|
||
(int) card_extract_bits(card->cid, 112, 4),
|
||
(int) card_extract_bits(card->cid, 116, 4) + 1997);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Ser#: 0x%08lx",
|
||
card_extract_bits(card->cid, 80, 32));
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"M=%02x, O=%04x",
|
||
(int) card_extract_bits(card->cid, 0, 8),
|
||
(int) card_extract_bits(card->cid, 8, 16));
|
||
int temp = card_extract_bits(card->csd, 2, 4);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
CARDTYPE " v%s", temp < 5 ?
|
||
spec_vers[temp] : "?.?");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Blocks: 0x%06lx", card->numblocks);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Blksz.: %d P:%c%c", card->blocksize,
|
||
card_extract_bits(card->csd, 48, 1) ? 'R' : '-',
|
||
card_extract_bits(card->csd, 106, 1) ? 'W' : '-');
|
||
output_dyn_value(pbuf, sizeof pbuf, card->speed / 1000,
|
||
kbit_units, false);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Speed: %s", pbuf);
|
||
output_dyn_value(pbuf, sizeof pbuf, card->tsac,
|
||
nsec_units, false);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Tsac: %s", pbuf);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Nsac: %d clk", card->nsac);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"R2W: *%d", card->r2w_factor);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"IRmax: %d..%d mA",
|
||
i_vmin[card_extract_bits(card->csd, 66, 3)],
|
||
i_vmax[card_extract_bits(card->csd, 69, 3)]);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"IWmax: %d..%d mA",
|
||
i_vmin[card_extract_bits(card->csd, 72, 3)],
|
||
i_vmax[card_extract_bits(card->csd, 75, 3)]);
|
||
}
|
||
else if (card->initialized == 0)
|
||
{
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Not Found!");
|
||
}
|
||
#ifndef HAVE_MMC
|
||
else /* card->initialized < 0 */
|
||
{
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Init Error! (%d)", card->initialized);
|
||
}
|
||
#endif
|
||
snprintf(title, 16, "[" CARDTYPE " %d]", *cardnum);
|
||
gui_synclist_set_title(lists, title, Icon_NOICON);
|
||
gui_synclist_set_nb_items(lists, simplelist_get_line_count());
|
||
gui_synclist_select_item(lists, 0);
|
||
btn = ACTION_REDRAW;
|
||
}
|
||
return btn;
|
||
}
|
||
#else /* !defined(HAVE_MMC) && !defined(HAVE_HOTSWAP) */
|
||
static int disk_callback(int btn, struct gui_synclist *lists)
|
||
{
|
||
(void)lists;
|
||
int i;
|
||
char buf[128];
|
||
unsigned short* identify_info = ata_get_identify();
|
||
bool timing_info_present = false;
|
||
(void)btn;
|
||
|
||
simplelist_set_line_count(0);
|
||
|
||
for (i=0; i < 20; i++)
|
||
((unsigned short*)buf)[i]=htobe16(identify_info[i+27]);
|
||
buf[40]=0;
|
||
/* kill trailing space */
|
||
for (i=39; i && buf[i]==' '; i--)
|
||
buf[i] = 0;
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Model: %s", buf);
|
||
for (i=0; i < 4; i++)
|
||
((unsigned short*)buf)[i]=htobe16(identify_info[i+23]);
|
||
buf[8]=0;
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Firmware: %s", buf);
|
||
snprintf(buf, sizeof buf, "%ld MB",
|
||
((unsigned long)identify_info[61] << 16 |
|
||
(unsigned long)identify_info[60]) / 2048 );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Size: %s", buf);
|
||
unsigned long free;
|
||
fat_size( IF_MV2(0,) NULL, &free );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Free: %ld MB", free / 1024);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Spinup time: %d ms", ata_spinup_time * (1000/HZ));
|
||
i = identify_info[83] & (1<<3);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Power mgmt: %s", i ? "enabled" : "unsupported");
|
||
i = identify_info[83] & (1<<9);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Noise mgmt: %s", i ? "enabled" : "unsupported");
|
||
i = identify_info[82] & (1<<6);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Read-ahead: %s", i ? "enabled" : "unsupported");
|
||
timing_info_present = identify_info[53] & (1<<1);
|
||
if(timing_info_present) {
|
||
char pio3[2], pio4[2];pio3[1] = 0;
|
||
pio4[1] = 0;
|
||
pio3[0] = (identify_info[64] & (1<<0)) ? '3' : 0;
|
||
pio4[0] = (identify_info[64] & (1<<1)) ? '4' : 0;
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"PIO modes: 0 1 2 %s %s", pio3, pio4);
|
||
}
|
||
else {
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"No PIO mode info");
|
||
}
|
||
timing_info_present = identify_info[53] & (1<<1);
|
||
if(timing_info_present) {
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Cycle times %dns/%dns",
|
||
identify_info[67],
|
||
identify_info[68] );
|
||
} else {
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"No timing info");
|
||
}
|
||
timing_info_present = identify_info[53] & (1<<1);
|
||
if(timing_info_present) {
|
||
i = identify_info[49] & (1<<11);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"IORDY support: %s", i ? "yes" : "no");
|
||
i = identify_info[49] & (1<<10);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"IORDY disable: %s", i ? "yes" : "no");
|
||
} else {
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"No timing info");
|
||
}
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Cluster size: %d bytes", fat_get_cluster_size(IF_MV(0)));
|
||
return btn;
|
||
}
|
||
|
||
static bool dbg_identify_info(void)
|
||
{
|
||
int fd = creat("/identify_info.bin");
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, ata_get_identify(), SECTOR_SIZE);
|
||
close(fd);
|
||
}
|
||
return false;
|
||
}
|
||
#endif /* !defined(HAVE_MMC) && !defined(HAVE_HOTSWAP) */
|
||
static bool dbg_disk_info(void)
|
||
{
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, "Disk Info", 1, NULL);
|
||
#if defined(HAVE_MMC) || defined(HAVE_HOTSWAP)
|
||
char title[16];
|
||
int card = 0;
|
||
info.callback_data = (void*)&card;
|
||
info.title = title;
|
||
#endif
|
||
info.action_callback = disk_callback;
|
||
info.hide_selection = true;
|
||
return simplelist_show_list(&info);
|
||
}
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifdef HAVE_DIRCACHE
|
||
static int dircache_callback(int btn, struct gui_synclist *lists)
|
||
{
|
||
(void)btn; (void)lists;
|
||
simplelist_set_line_count(0);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Cache initialized: %s",
|
||
dircache_is_enabled() ? "Yes" : "No");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Cache size: %d B",
|
||
dircache_get_cache_size());
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Last size: %d B",
|
||
global_status.dircache_size);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Limit: %d B",
|
||
DIRCACHE_LIMIT);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Reserve: %d/%d B",
|
||
dircache_get_reserve_used(), DIRCACHE_RESERVE);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Scanning took: %d s",
|
||
dircache_get_build_ticks() / HZ);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Entry count: %d",
|
||
dircache_get_entry_count());
|
||
return btn;
|
||
}
|
||
|
||
static bool dbg_dircache_info(void)
|
||
{
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, "Dircache Info", 7, NULL);
|
||
info.action_callback = dircache_callback;
|
||
info.hide_selection = true;
|
||
return simplelist_show_list(&info);
|
||
}
|
||
|
||
#endif /* HAVE_DIRCACHE */
|
||
|
||
#ifdef HAVE_TAGCACHE
|
||
static int database_callback(int btn, struct gui_synclist *lists)
|
||
{
|
||
(void)lists;
|
||
struct tagcache_stat *stat = tagcache_get_stat();
|
||
static bool synced = false;
|
||
|
||
simplelist_set_line_count(0);
|
||
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Initialized: %s",
|
||
stat->initialized ? "Yes" : "No");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "DB Ready: %s",
|
||
stat->ready ? "Yes" : "No");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "RAM Cache: %s",
|
||
stat->ramcache ? "Yes" : "No");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "RAM: %d/%d B",
|
||
stat->ramcache_used, stat->ramcache_allocated);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Progress: %d%% (%d entries)",
|
||
stat->progress, stat->processed_entries);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Curfile: %s",
|
||
stat->curentry ? stat->curentry : "---");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Commit step: %d",
|
||
stat->commit_step);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Commit delayed: %s",
|
||
stat->commit_delayed ? "Yes" : "No");
|
||
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Queue length: %d",
|
||
stat->queue_length);
|
||
|
||
if (synced)
|
||
{
|
||
synced = false;
|
||
tagcache_screensync_event();
|
||
}
|
||
|
||
if (!btn && stat->curentry)
|
||
{
|
||
synced = true;
|
||
return ACTION_REDRAW;
|
||
}
|
||
|
||
if (btn == ACTION_STD_CANCEL)
|
||
tagcache_screensync_enable(false);
|
||
|
||
return btn;
|
||
}
|
||
static bool dbg_tagcache_info(void)
|
||
{
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, "Database Info", 8, NULL);
|
||
info.action_callback = database_callback;
|
||
info.hide_selection = true;
|
||
|
||
/* Don't do nonblock here, must give enough processing time
|
||
for tagcache thread. */
|
||
/* info.timeout = TIMEOUT_NOBLOCK; */
|
||
info.timeout = 1;
|
||
tagcache_screensync_enable(true);
|
||
return simplelist_show_list(&info);
|
||
}
|
||
#endif
|
||
|
||
#if CONFIG_CPU == SH7034
|
||
static bool dbg_save_roms(void)
|
||
{
|
||
int fd;
|
||
int oldmode = system_memory_guard(MEMGUARD_NONE);
|
||
|
||
fd = creat("/internal_rom_0000-FFFF.bin");
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0, 0x10000);
|
||
close(fd);
|
||
}
|
||
|
||
fd = creat("/internal_rom_2000000-203FFFF.bin");
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0x2000000, 0x40000);
|
||
close(fd);
|
||
}
|
||
|
||
system_memory_guard(oldmode);
|
||
return false;
|
||
}
|
||
#elif defined CPU_COLDFIRE
|
||
static bool dbg_save_roms(void)
|
||
{
|
||
int fd;
|
||
int oldmode = system_memory_guard(MEMGUARD_NONE);
|
||
|
||
#if defined(IRIVER_H100_SERIES)
|
||
fd = creat("/internal_rom_000000-1FFFFF.bin");
|
||
#elif defined(IRIVER_H300_SERIES)
|
||
fd = creat("/internal_rom_000000-3FFFFF.bin");
|
||
#elif defined(IAUDIO_X5) || defined(IAUDIO_M5)
|
||
fd = creat("/internal_rom_000000-3FFFFF.bin");
|
||
#endif
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0, FLASH_SIZE);
|
||
close(fd);
|
||
}
|
||
system_memory_guard(oldmode);
|
||
|
||
#ifdef HAVE_EEPROM
|
||
fd = creat("/internal_eeprom.bin");
|
||
if (fd >= 0)
|
||
{
|
||
int old_irq_level;
|
||
char buf[EEPROM_SIZE];
|
||
int err;
|
||
|
||
old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
||
|
||
err = eeprom_24cxx_read(0, buf, sizeof buf);
|
||
if (err)
|
||
gui_syncsplash(HZ*3, "Eeprom read failure (%d)",err);
|
||
else
|
||
{
|
||
write(fd, buf, sizeof buf);
|
||
}
|
||
|
||
set_irq_level(old_irq_level);
|
||
|
||
close(fd);
|
||
}
|
||
#endif
|
||
|
||
return false;
|
||
}
|
||
#elif defined(CPU_PP) && !(defined(SANSA_E200) || defined(SANSA_C200))
|
||
static bool dbg_save_roms(void)
|
||
{
|
||
int fd;
|
||
|
||
fd = creat("/internal_rom_000000-0FFFFF.bin");
|
||
if(fd >= 0)
|
||
{
|
||
write(fd, (void *)0x20000000, FLASH_SIZE);
|
||
close(fd);
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif /* CPU */
|
||
|
||
#ifndef SIMULATOR
|
||
#if CONFIG_TUNER
|
||
static int radio_callback(int btn, struct gui_synclist *lists)
|
||
{
|
||
(void)lists;
|
||
if (btn == ACTION_STD_CANCEL)
|
||
return btn;
|
||
simplelist_set_line_count(1);
|
||
|
||
#if (CONFIG_TUNER & LV24020LP)
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"CTRL_STAT: %02X", lv24020lp_get(LV24020LP_CTRL_STAT) );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"RADIO_STAT: %02X", lv24020lp_get(LV24020LP_REG_STAT) );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"MSS_FM: %d kHz", lv24020lp_get(LV24020LP_MSS_FM) );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"MSS_IF: %d Hz", lv24020lp_get(LV24020LP_MSS_IF) );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"MSS_SD: %d Hz", lv24020lp_get(LV24020LP_MSS_SD) );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"if_set: %d Hz", lv24020lp_get(LV24020LP_IF_SET) );
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"sd_set: %d Hz", lv24020lp_get(LV24020LP_SD_SET) );
|
||
#endif
|
||
#if (CONFIG_TUNER & S1A0903X01)
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
"Samsung regs: %08X", s1a0903x01_get(RADIO_ALL));
|
||
/* This one doesn't return dynamic data atm */
|
||
#endif
|
||
#if (CONFIG_TUNER & TEA5767)
|
||
struct tea5767_dbg_info nfo;
|
||
tea5767_dbg_info(&nfo);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "Philips regs:");
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
" Read: %02X %02X %02X %02X %02X",
|
||
(unsigned)nfo.read_regs[0], (unsigned)nfo.read_regs[1],
|
||
(unsigned)nfo.read_regs[2], (unsigned)nfo.read_regs[3],
|
||
(unsigned)nfo.read_regs[4]);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE,
|
||
" Write: %02X %02X %02X %02X %02X",
|
||
(unsigned)nfo.write_regs[0], (unsigned)nfo.write_regs[1],
|
||
(unsigned)nfo.write_regs[2], (unsigned)nfo.write_regs[3],
|
||
(unsigned)nfo.write_regs[4]);
|
||
#endif
|
||
return ACTION_REDRAW;
|
||
}
|
||
static bool dbg_fm_radio(void)
|
||
{
|
||
struct simplelist_info info;
|
||
simplelist_info_init(&info, "FM Radio", 1, NULL);
|
||
simplelist_set_line_count(0);
|
||
simplelist_addline(SIMPLELIST_ADD_LINE, "HW detected: %s",
|
||
radio_hardware_present() ? "yes" : "no");
|
||
|
||
info.action_callback = radio_hardware_present()?radio_callback : NULL;
|
||
info.hide_selection = true;
|
||
return simplelist_show_list(&info);
|
||
}
|
||
#endif /* CONFIG_TUNER */
|
||
#endif /* !SIMULATOR */
|
||
|
||
#ifdef HAVE_LCD_BITMAP
|
||
extern bool do_screendump_instead_of_usb;
|
||
|
||
static bool dbg_screendump(void)
|
||
{
|
||
do_screendump_instead_of_usb = !do_screendump_instead_of_usb;
|
||
gui_syncsplash(HZ, "Screendump %s",
|
||
do_screendump_instead_of_usb?"enabled":"disabled");
|
||
return false;
|
||
}
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE)
|
||
static bool dbg_set_memory_guard(void)
|
||
{
|
||
static const struct opt_items names[MAXMEMGUARD] = {
|
||
{ "None", -1 },
|
||
{ "Flash ROM writes", -1 },
|
||
{ "Zero area (all)", -1 }
|
||
};
|
||
int mode = system_memory_guard(MEMGUARD_KEEP);
|
||
|
||
set_option( "Catch mem accesses", &mode, INT, names, MAXMEMGUARD, NULL);
|
||
system_memory_guard(mode);
|
||
|
||
return false;
|
||
}
|
||
#endif /* CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) */
|
||
|
||
#if defined(TOSHIBA_GIGABEAT_F) && !defined(SIMULATOR)
|
||
|
||
extern volatile bool lcd_poweroff;
|
||
|
||
static bool dbg_lcd_power_off(void)
|
||
{
|
||
lcd_setmargins(0, 0);
|
||
|
||
while(1)
|
||
{
|
||
int button;
|
||
|
||
lcd_clear_display();
|
||
lcd_puts(0, 0, "LCD Power Off");
|
||
if(lcd_poweroff)
|
||
lcd_puts(1, 1, "Yes");
|
||
else
|
||
lcd_puts(1, 1, "No");
|
||
|
||
lcd_update();
|
||
|
||
button = get_action(CONTEXT_STD,HZ/5);
|
||
switch(button)
|
||
{
|
||
case ACTION_STD_PREV:
|
||
case ACTION_STD_NEXT:
|
||
lcd_poweroff = !lcd_poweroff;
|
||
break;
|
||
case ACTION_STD_OK:
|
||
case ACTION_STD_CANCEL:
|
||
return false;
|
||
default:
|
||
sleep(HZ/10);
|
||
break;
|
||
}
|
||
}
|
||
return false;
|
||
}
|
||
#endif
|
||
|
||
#if defined(HAVE_EEPROM) && !defined(HAVE_EEPROM_SETTINGS)
|
||
static bool dbg_write_eeprom(void)
|
||
{
|
||
int fd;
|
||
int rc;
|
||
int old_irq_level;
|
||
char buf[EEPROM_SIZE];
|
||
int err;
|
||
|
||
fd = open("/internal_eeprom.bin", O_RDONLY);
|
||
|
||
if (fd >= 0)
|
||
{
|
||
rc = read(fd, buf, EEPROM_SIZE);
|
||
|
||
if(rc == EEPROM_SIZE)
|
||
{
|
||
old_irq_level = set_irq_level(HIGHEST_IRQ_LEVEL);
|
||
|
||
err = eeprom_24cxx_write(0, buf, sizeof buf);
|
||
if (err)
|
||
gui_syncsplash(HZ*3, "Eeprom write failure (%d)",err);
|
||
else
|
||
gui_syncsplash(HZ*3, "Eeprom written successfully");
|
||
|
||
set_irq_level(old_irq_level);
|
||
}
|
||
else
|
||
{
|
||
gui_syncsplash(HZ*3, "File read error (%d)",rc);
|
||
}
|
||
close(fd);
|
||
}
|
||
else
|
||
{
|
||
gui_syncsplash(HZ*3, "Failed to open 'internal_eeprom.bin'");
|
||
}
|
||
|
||
return false;
|
||
}
|
||
#endif /* defined(HAVE_EEPROM) && !defined(HAVE_EEPROM_SETTINGS) */
|
||
#ifdef CPU_BOOST_LOGGING
|
||
static bool cpu_boost_log(void)
|
||
{
|
||
int i = 0,j=0;
|
||
int count = cpu_boost_log_getcount();
|
||
int lines = LCD_HEIGHT/SYSFONT_HEIGHT;
|
||
char *str;
|
||
bool done;
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
str = cpu_boost_log_getlog_first();
|
||
while (i < count)
|
||
{
|
||
lcd_clear_display();
|
||
for(j=0; j<lines; j++,i++)
|
||
{
|
||
if (!str)
|
||
str = cpu_boost_log_getlog_next();
|
||
if (str)
|
||
{
|
||
lcd_puts(0, j,str);
|
||
}
|
||
str = NULL;
|
||
}
|
||
lcd_update();
|
||
done = false;
|
||
while (!done)
|
||
{
|
||
switch(get_action(CONTEXT_STD,TIMEOUT_BLOCK))
|
||
{
|
||
case ACTION_STD_OK:
|
||
case ACTION_STD_PREV:
|
||
case ACTION_STD_NEXT:
|
||
done = true;
|
||
break;
|
||
case ACTION_STD_CANCEL:
|
||
i = count;
|
||
done = true;
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
get_action(CONTEXT_STD,TIMEOUT_BLOCK);
|
||
lcd_setfont(FONT_UI);
|
||
return false;
|
||
}
|
||
#endif
|
||
|
||
#if (defined(HAVE_SCROLLWHEEL) && (CONFIG_KEYPAD==IPOD_4G_PAD) && !defined(SIMULATOR))
|
||
extern bool wheel_is_touched;
|
||
extern int old_wheel_value;
|
||
extern int new_wheel_value;
|
||
extern int wheel_delta;
|
||
extern unsigned int accumulated_wheel_delta;
|
||
extern unsigned int wheel_velocity;
|
||
|
||
static bool dbg_scrollwheel(void)
|
||
{
|
||
char buf[64];
|
||
unsigned int speed;
|
||
|
||
lcd_setmargins(0, 0);
|
||
lcd_setfont(FONT_SYSFIXED);
|
||
|
||
while (1)
|
||
{
|
||
if (action_userabort(HZ/10))
|
||
return false;
|
||
|
||
lcd_clear_display();
|
||
|
||
/* show internal variables of scrollwheel driver */
|
||
snprintf(buf, sizeof(buf), "wheel touched: %s", (wheel_is_touched) ? "true" : "false");
|
||
lcd_puts(0, 0, buf);
|
||
snprintf(buf, sizeof(buf), "new position: %2d", new_wheel_value);
|
||
lcd_puts(0, 1, buf);
|
||
snprintf(buf, sizeof(buf), "old position: %2d", old_wheel_value);
|
||
lcd_puts(0, 2, buf);
|
||
snprintf(buf, sizeof(buf), "wheel delta: %2d", wheel_delta);
|
||
lcd_puts(0, 3, buf);
|
||
snprintf(buf, sizeof(buf), "accumulated delta: %2d", accumulated_wheel_delta);
|
||
lcd_puts(0, 4, buf);
|
||
snprintf(buf, sizeof(buf), "velo [deg/s]: %4d", (int)wheel_velocity);
|
||
lcd_puts(0, 5, buf);
|
||
|
||
/* show effective accelerated scrollspeed */
|
||
speed = button_apply_acceleration( (1<<31)|(1<<24)|wheel_velocity);
|
||
snprintf(buf, sizeof(buf), "accel. speed: %4d", speed);
|
||
lcd_puts(0, 6, buf);
|
||
|
||
lcd_update();
|
||
}
|
||
return false;
|
||
}
|
||
#endif
|
||
|
||
|
||
/****** The menu *********/
|
||
struct the_menu_item {
|
||
unsigned char *desc; /* string or ID */
|
||
bool (*function) (void); /* return true if USB was connected */
|
||
};
|
||
static const struct the_menu_item menuitems[] = {
|
||
#if defined(TOSHIBA_GIGABEAT_F) && !defined(SIMULATOR)
|
||
{ "LCD Power Off", dbg_lcd_power_off },
|
||
#endif
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) || \
|
||
(defined(CPU_PP) && !(defined(SANSA_E200) || defined(SANSA_C200)))
|
||
{ "Dump ROM contents", dbg_save_roms },
|
||
#endif
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE) || defined(CPU_PP) || CONFIG_CPU == S3C2440
|
||
{ "View I/O ports", dbg_ports },
|
||
#endif
|
||
#if (CONFIG_RTC == RTC_PCF50605) && !defined(SIMULATOR)
|
||
{ "View PCF registers", dbg_pcf },
|
||
#endif
|
||
#if defined(HAVE_TSC2100) && !defined(SIMULATOR)
|
||
{ "TSC2100 debug", tsc2100_debug },
|
||
#endif
|
||
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
|
||
{ "CPU frequency", dbg_cpufreq },
|
||
#endif
|
||
#if defined(IRIVER_H100_SERIES) && !defined(SIMULATOR)
|
||
{ "S/PDIF analyzer", dbg_spdif },
|
||
#endif
|
||
#if CONFIG_CPU == SH7034 || defined(CPU_COLDFIRE)
|
||
{ "Catch mem accesses", dbg_set_memory_guard },
|
||
#endif
|
||
{ "View OS stacks", dbg_os },
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#ifndef SIMULATOR
|
||
{ "View battery", view_battery },
|
||
#endif
|
||
{ "Screendump", dbg_screendump },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
{ "View HW info", dbg_hw_info },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
{ "View partitions", dbg_partitions },
|
||
#endif
|
||
#ifndef SIMULATOR
|
||
{ "View disk info", dbg_disk_info },
|
||
#if !defined(HAVE_MMC) && !defined(HAVE_HOTSWAP)
|
||
{ "Dump ATA identify info", dbg_identify_info},
|
||
#endif
|
||
#endif
|
||
#ifdef HAVE_DIRCACHE
|
||
{ "View dircache info", dbg_dircache_info },
|
||
#endif
|
||
#ifdef HAVE_TAGCACHE
|
||
{ "View database info", dbg_tagcache_info },
|
||
#endif
|
||
#ifdef HAVE_LCD_BITMAP
|
||
#if CONFIG_CODEC == SWCODEC
|
||
{ "View buffering thread", dbg_buffering_thread },
|
||
#elif !defined(SIMULATOR)
|
||
{ "View audio thread", dbg_audio_thread },
|
||
#endif
|
||
#ifdef PM_DEBUG
|
||
{ "pm histogram", peak_meter_histogram},
|
||
#endif /* PM_DEBUG */
|
||
#endif /* HAVE_LCD_BITMAP */
|
||
#ifndef SIMULATOR
|
||
#if CONFIG_TUNER
|
||
{ "FM Radio", dbg_fm_radio },
|
||
#endif
|
||
#endif
|
||
#if defined(HAVE_EEPROM) && !defined(HAVE_EEPROM_SETTINGS)
|
||
{ "Write back EEPROM", dbg_write_eeprom },
|
||
#endif
|
||
#ifdef ROCKBOX_HAS_LOGF
|
||
{"logf", logfdisplay },
|
||
{"logfdump", logfdump },
|
||
#endif
|
||
#ifdef CPU_BOOST_LOGGING
|
||
{"cpu_boost log",cpu_boost_log},
|
||
#endif
|
||
#if (defined(HAVE_SCROLLWHEEL) && (CONFIG_KEYPAD==IPOD_4G_PAD) && !defined(SIMULATOR))
|
||
{"Debug scrollwheel", dbg_scrollwheel},
|
||
#endif
|
||
};
|
||
static int menu_action_callback(int btn, struct gui_synclist *lists)
|
||
{
|
||
if (btn == ACTION_STD_OK)
|
||
{
|
||
menuitems[gui_synclist_get_sel_pos(lists)].function();
|
||
btn = ACTION_REDRAW;
|
||
}
|
||
return btn;
|
||
}
|
||
static char* dbg_menu_getname(int item, void * data, char *buffer)
|
||
{
|
||
(void)data; (void)buffer;
|
||
return menuitems[item].desc;
|
||
}
|
||
bool debug_menu(void)
|
||
{
|
||
struct simplelist_info info;
|
||
|
||
simplelist_info_init(&info, "Debug Menu", ARRAYLEN(menuitems), NULL);
|
||
info.action_callback = menu_action_callback;
|
||
info.get_name = dbg_menu_getname;
|
||
|
||
return simplelist_show_list(&info);
|
||
}
|