Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/config/mrobe500.h
Björn Stenberg c0740440ac Rename targets to be consistent in all places. (FS #10819). Take 2. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23883 a1c6a512-1295-4272-9138-f99709370657
2009-12-07 12:19:08 +00:00

258 lines
7.6 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Karl Kurbjun
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* This config file is for the M:Robe 500i
*/
#define TARGET_TREE /* this target is using the target tree system */
#define CONFIG_SDRAM_START 0x00900000
#define OLYMPUS_MROBE_500 1
#define MODEL_NAME "Olympus M:Robe 500i"
/* For Rolo and boot loader */
#define MODEL_NUMBER 22
/* define this if you use an ATA controller */
#define CONFIG_STORAGE STORAGE_ATA
/* Define this to add support for ATA DMA */
//#define HAVE_ATA_DMA
/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR
/* define this if you want album art for this target */
#define HAVE_ALBUMART
/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING
/* define this to enable JPEG decoding */
#define HAVE_JPEG
/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN
/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN
/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* define this if you want viewport clipping enabled for safe LCD functions */
#define HAVE_VIEWPORT_CLIP
/* LCD dimensions */
#define CONFIG_LCD LCD_MROBE500
/* These defines are used internal to this header */
#define _LCD_RES_QVGA 1
#define _LCD_RES_VGA 2
#define _LCD_PORTRAIT 1
#define _LCD_LANDSCAPE 2
/* Setup the resolution and orientation */
#define _RESOLUTION _LCD_RES_VGA
#define _ORIENTATION _LCD_LANDSCAPE
#if _RESOLUTION == _LCD_RES_VGA
#define LCD_NATIVE_WIDTH 480
#define LCD_NATIVE_HEIGHT 640
#else
#define LCD_NATIVE_WIDTH 240
#define LCD_NATIVE_HEIGHT 320
#endif
/* choose the lcd orientation. CONFIG_ORIENTATION defined in config.h */
#if _ORIENTATION == _LCD_PORTRAIT
/* This is the Portrait setup */
#define LCD_WIDTH LCD_NATIVE_WIDTH
#define LCD_HEIGHT LCD_NATIVE_HEIGHT
#else
/* Frame buffer stride */
#define LCD_STRIDEFORMAT VERTICAL_STRIDE
/* This is the Landscape setup */
#define LCD_WIDTH LCD_NATIVE_HEIGHT
#define LCD_HEIGHT LCD_NATIVE_WIDTH
#endif
#define LCD_DEPTH 16 /* 65k colours */
#define LCD_PIXELFORMAT RGB565 /* rgb565 */
#define MAX_ICON_HEIGHT 35
#define MAX_ICON_WIDTH 35
/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
should be defined as well. */
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
/* remote LCD */
#define HAVE_REMOTE_LCD
#define LCD_REMOTE_WIDTH 79
#define LCD_REMOTE_HEIGHT 16
#define LCD_REMOTE_DEPTH 1
/* Remote display colours, for screenshots and sim (0xRRGGBB) */
#define LCD_REMOTE_DARKCOLOR 0x000000
#define LCD_REMOTE_BRIGHTCOLOR 0x5a915a
#define LCD_REMOTE_BL_DARKCOLOR 0x000000
#define LCD_REMOTE_BL_BRIGHTCOLOR 0x82b4fa
#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
#define CONFIG_REMOTE_KEYPAD MROBE_REMOTE
#define MIN_REMOTE_CONTRAST_SETTING 0
#define MAX_REMOTE_CONTRAST_SETTING 15
#define DEFAULT_REMOTE_CONTRAST_SETTING 7
#define CONFIG_KEYPAD MROBE500_PAD
#define HAVE_TOUCHSCREEN
#define HAVE_BUTTON_DATA
/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT
/* define this if the target has volume keys which can be used in the lists */
#define HAVE_VOLUME_IN_LIST
/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC
//#define HAVE_HARDWARE_BEEP
/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS
/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_RX5X348AB
/* define this if you have a disk storage, i.e. something
that needs spinups and can cause skips when shaked */
#define HAVE_DISK_STORAGE
/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING 0
#define MAX_BRIGHTNESS_SETTING 127
#define DEFAULT_BRIGHTNESS_SETTING 85 /* OF "full brightness" */
#define DEFAULT_DIMNESS_SETTING 22 /* OF "most dim" */
/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF
/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE 0x100000
/* The number of bytes reserved for loadable plugins */
#if LCD_NATIVE_WIDTH < 480
#define PLUGIN_BUFFER_SIZE 0x100000
#else
/* THe larger screen needs larger bitmaps in plugins */
#define PLUGIN_BUFFER_SIZE 0x200000
#endif
#define HW_SAMPR_CAPS SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11 | SAMPR_CAP_8
#define BATTERY_CAPACITY_DEFAULT 1500 /* default battery capacity */
#define BATTERY_CAPACITY_MIN 1000 /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 2000 /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 100 /* capacity increment */
#define BATTERY_TYPES_COUNT 1 /* only one type */
/* define current usage levels */
#define CURRENT_NORMAL 100 /* Measured */
#define CURRENT_BACKLIGHT 100 /* Over 200 mA total measured when on */
#define CURRENT_RECORD 0 /* no recording */
/* Hardware controlled charging with monitoring */
#define CONFIG_CHARGING CHARGING_MONITOR
/* Define this if you have a Texas Instruments TSC2100 touch screen */
#define HAVE_TSC2100
/* M66591 register base */
#define M66591_BASE 0x60000000
/* enable these for the usb stack */
#define CONFIG_USBOTG USBOTG_M66591
#define USE_ROCKBOX_USB
#define HAVE_USBSTACK
//#define HAVE_USB_POWER
//#define USBPOWER_BUTTON BUTTON_POWER
//#define USBPOWER_BTN_IGNORE BUTTON_TOUCH
/* usb stack and driver settings */
#define USB_NUM_ENDPOINTS 7
#define USB_VENDOR_ID 0x07b4
#define USB_PRODUCT_ID 0x0281
#define HAVE_USB_HID_MOUSE
/* Define this if hardware supports alternate blitting */
#define HAVE_LCD_MODES LCD_MODE_RGB565 | LCD_MODE_YUV | LCD_MODE_PAL256
#define CONFIG_CPU DM320
#define CONFIG_I2C I2C_DM320
/* define this if the hardware can be powered off while charging */
#define HAVE_POWEROFF_WHILE_CHARGING
/* The size of the flash ROM */
#define FLASH_SIZE 0x400000
/* Define this to the CPU frequency */
#define CPU_FREQ 87500000
/* Define this if you have ATA power-off control */
#define HAVE_ATA_POWER_OFF
/* Offset ( in the firmware file's header ) to the file CRC */
#define FIRMWARE_OFFSET_FILE_CRC 0
/* Offset ( in the firmware file's header ) to the real data */
#define FIRMWARE_OFFSET_FILE_DATA 8
/* Define this if you have adjustable CPU frequency */
#define HAVE_ADJUSTABLE_CPU_FREQ
#define BOOTFILE_EXT "mrobe500"
#define BOOTFILE "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"
#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */
Reference in a new issue View git blame Copy permalink