| .. |
|
archos/av300
|
FS#12418 - Merge prototypes from ata-target.h files into new file ata-driver.h. After this change:
|
2011-12-08 21:23:53 +00:00 |
|
as3525
|
Sansa AMSv2: don't panic if microsd init failed
|
2011-12-14 18:37:51 +00:00 |
|
at91sam
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
imx31
|
Introduce USED_ATTR wrapper for __attribute__((used)).
|
2011-12-09 15:33:59 +00:00 |
|
imx233
|
imx233: add comment about block reset
|
2011-12-13 22:48:01 +00:00 |
|
ipod
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
iriver
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
olympus
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
pbell
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
philips
|
HDD6330: introduce a new button (BUTTON_TAP), based on the hardware support for gestures. From now on some things are accessible by tapping on the vertical scroll strip. Reorganize, fix and remap some of the keymaps, add missing keymap for the recording.
|
2011-12-03 23:13:17 +00:00 |
|
pnx0101
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
rk27xx
|
Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
|
2011-11-03 11:53:02 +00:00 |
|
s3c2440
|
Introduce USED_ATTR wrapper for __attribute__((used)).
|
2011-12-09 15:33:59 +00:00 |
|
s5l8700
|
Fix the gpl notice in the previous commits new files, and fix the yelow gevearts naughtily ignored
|
2011-11-16 10:37:48 +00:00 |
|
s5l8702
|
Bulk convert all DOS line endings to UNIX.
|
2011-11-06 22:44:25 +00:00 |
|
samsung
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
sandisk
|
AS3525v1/v2:
|
2011-12-08 19:20:00 +00:00 |
|
tatung
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
tcc77x
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
tcc780x
|
FS#12397 : On targets which load .data directly into its final location and lack code for moving it, remove linker script trick which ignores section alignment and word-aligns the section instead.
|
2011-11-22 17:34:01 +00:00 |
|
tms320dm320
|
Add labels for calculating RAM usage on tms320dm320 targets. Thanks to Rafaël Carré for pointing this out.
|
2011-12-09 20:45:14 +00:00 |
|
adc-as3514.c
|
|
|
|
adc-pp5020.c
|
|
|
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
|
|
|
ata-as-arm.S
|
|
|
|
ata-nand-telechips.c
|
GSoC/Buflib: Add buflib memory alocator to the core.
|
2011-08-30 14:01:33 +00:00 |
|
ata-pp5002.c
|
FS#12418 - Merge prototypes from ata-target.h files into new file ata-driver.h. After this change:
|
2011-12-08 21:23:53 +00:00 |
|
ata-pp5020.c
|
FS#12418 - Merge prototypes from ata-target.h files into new file ata-driver.h. After this change:
|
2011-12-08 21:23:53 +00:00 |
|
ata-sd-pp.c
|
All kernel objects in code shared amongs targets (core, plugins, codecs) should be declared SHAREDBSS_ATTR as any core could potentially touch them even though they seem only to involve threads on one core. The exception is target code for particular CPUs where proper allocation is fixed. playlist.c was a little odd too-- use one mutex for the current playlist and a separate one for created playlists (still pondering the necessity of more than one).
|
2011-02-14 11:27:45 +00:00 |
|
ata-target.h
|
FS#12418 - Merge prototypes from ata-target.h files into new file ata-driver.h. After this change:
|
2011-12-08 21:23:53 +00:00 |
|
audio-pp.c
|
|
|
|
bits-armv4.S
|
Add ARMv4 16-bit(set, mod, clr) operations used on DM320.
|
2011-02-06 19:43:45 +00:00 |
|
bits-armv6.S
|
|
|
|
boot-pp502x-bl-usb.lds
|
e200v1 seems to be ok using USB-enabled bootloader. Also, include the bootloader USB .lds into the boot.lds instead of pasting into every one to keep things sane for now-- commented upon inside.
|
2011-01-16 01:40:15 +00:00 |
|
crt0-pp-bl.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
crt0-pp.S
|
PortalPlayer: Loading of stack munge value into r4 was moved in r30741 to after the idle stack init loop, breaking the usage readout.
|
2011-11-27 07:01:47 +00:00 |
|
crt0-pp502x-bl-usb.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
crt0.S
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
debug-pp.c
|
ipod nano 1g: enable readout of battery current through ADC channel 4066_ISTAT
|
2011-07-24 17:32:50 +00:00 |
|
debug-target.h
|
HDD6330: introduce a new button (BUTTON_TAP), based on the hardware support for gestures. From now on some things are accessible by tapping on the vertical scroll strip. Reorganize, fix and remap some of the keymaps, add missing keymap for the recording.
|
2011-12-03 23:13:17 +00:00 |
|
ffs-arm.S
|
|
|
|
i2c-pp.c
|
|
|
|
i2c-telechips.c
|
|
|
|
i2s-pp.c
|
|
|
|
kernel-pp.c
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
lcd-as-memframe.S
|
|
|
|
lcd-c200_c200v2.c
|
|
|
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
Rename cache coherency functions.
|
2010-09-08 17:05:49 +00:00 |
|
mmu-arm.S
|
imx233/fuze+: prepare target to enable MMU
|
2011-07-23 11:45:18 +00:00 |
|
mmu-armv6.S
|
Fix beast, forgot the asm label when renaming.
|
2010-09-09 17:00:50 +00:00 |
|
pcm-mixer-armv4.c
|
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
|
2011-06-29 06:37:04 +00:00 |
|
pcm-mixer-armv5.c
|
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
|
2011-06-29 06:37:04 +00:00 |
|
pcm-mixer-armv6.c
|
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
|
2011-06-29 06:37:04 +00:00 |
|
pcm-pp.c
|
Oops. "void void" doesn't work in C :p.
|
2011-09-01 12:20:52 +00:00 |
|
pcm-telechips.c
|
Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it.
|
2011-09-01 12:15:43 +00:00 |
|
powermgmt-ascodec.c
|
Sansa AMSv2: initialise PMU (power management unit), inspired by how the OF does it
|
2011-09-18 15:33:19 +00:00 |
|
sd-pp-target.h
|
|
|
|
support-arm.S
|
Fix assembler .size directives. Currently used binutils don't complain, but 2.21.1 treats these as errors.
|
2011-11-09 19:20:33 +00:00 |
|
system-arm.c
|
Switch to SYS mode on arm FS#12322 by me
|
2011-10-11 16:06:03 +00:00 |
|
system-arm.h
|
Merge functionality of wakeups and semaphores-- fewer APIs and object types. semaphore_wait takes a timeout now so codecs and plugins have to be made incompatible. Don't make semaphores for targets not using them.
|
2011-03-02 08:49:38 +00:00 |
|
system-pp502x.c
|
Add a higher level USB detection that prevents fraudulent bus resets from causing USB mode to be entered. Enable for SA9200 only at this time. Also, for SA9200, use the bus power GPIO rather than the 'connector inserted' GPIO to detect the cable.
|
2011-01-17 12:24:41 +00:00 |
|
system-pp5002.c
|
Rename cache coherency functions.
|
2010-09-08 17:05:49 +00:00 |
|
system-target.h
|
Set the default battery capacity for ipod video properly depending on detected RAM size.
|
2011-07-19 20:48:16 +00:00 |
|
thread-arm.c
|
thread.c includes gcc_extensions.h and thread-XXX.c files are includes inside thread.c therefore do not require their own.
|
2011-12-10 20:47:59 +00:00 |
|
thread-pp.c
|
thread.c includes gcc_extensions.h and thread-XXX.c files are includes inside thread.c therefore do not require their own.
|
2011-12-10 20:47:59 +00:00 |
|
timer-pp.c
|
|
|
|
usb-drv-arc.c
|
Some iPod Video's need a 2nd call of ub_drv_init() to establish the USB connection. This workaround breaks the USB functionality for other devices. Until there is a proper fix available just use the workaround for iPod Video only. Fixes FS#12324.
|
2011-10-20 14:48:20 +00:00 |
|
usb-fw-pp502x.c
|
Remove obsolete USB_DETECT_BY_DRV define throughout.
|
2011-09-14 16:42:43 +00:00 |
|
usb-fw-pp5002.c
|
Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
|
2011-01-15 08:52:59 +00:00 |
|
usb-s3c6400x.c
|
usb-s3c6400: fix confusion between USB_DIR_IN and DIR_IN
|
2011-12-14 15:31:27 +00:00 |
|
usb-target.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
usb-tcc.c
|
|
|
|
wmcodec-pp.c
|
|
|
|
wmcodec-telechips.c
|
|
|
b366d63f03