Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/iriver/h10/lcd-h10_5gb.c

390 lines
11 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "lcd.h"
#include "kernel.h"
#include "system.h"
/* check if number of useconds has past */
static inline bool timer_check(int clock_start, int usecs)
{
return ((int)(USEC_TIMER - clock_start)) >= usecs;
}
/* Hardware address of LCD. Bits are:
* 31 - set to write, poll for completion.
* 24 - 0 for command, 1 for data
* 7..0 - command/data to send
* Commands/Data are always sent in 16-bits, msb first.
*/
#define LCD_BASE *(volatile unsigned int *)0x70008a0c
#define LCD_BUSY_MASK 0x80000000
#define LCD_CMD 0x80000000
#define LCD_DATA 0x81000000
/* register defines for TL1771 */
#define R_START_OSC 0x00
#define R_DEVICE_CODE_READ 0x00
#define R_DRV_OUTPUT_CONTROL 0x01
#define R_DRV_AC_CONTROL 0x02
#define R_ENTRY_MODE 0x03
#define R_DISP_CONTROL1 0x07
#define R_DISP_CONTROL2 0x08
#define R_FRAME_CYCLE_CONTROL 0x0b
#define R_POWER_CONTROL1 0x10
#define R_POWER_CONTROL2 0x11
#define R_POWER_CONTROL3 0x12
#define R_POWER_CONTROL4 0x13
#define R_POWER_CONTROL5 0x14
#define R_RAM_ADDR_SET 0x21
#define R_WRITE_DATA_2_GRAM 0x22
#define R_GAMMA_FINE_ADJ_POS1 0x30
#define R_GAMMA_FINE_ADJ_POS2 0x31
#define R_GAMMA_FINE_ADJ_POS3 0x32
#define R_GAMMA_GRAD_ADJ_POS 0x33
#define R_GAMMA_FINE_ADJ_NEG1 0x34
#define R_GAMMA_FINE_ADJ_NEG2 0x35
#define R_GAMMA_FINE_ADJ_NEG3 0x36
#define R_GAMMA_GRAD_ADJ_NEG 0x37
#define R_POWER_CONTROL6 0x38
#define R_GATE_SCAN_START_POS 0x40
#define R_1ST_SCR_DRV_POS 0x42
#define R_2ND_SCR_DRV_POS 0x43
#define R_HORIZ_RAM_ADDR_POS 0x44
#define R_VERT_RAM_ADDR_POS 0x45
static inline void lcd_wait_write(void)
{
if ((LCD_BASE & LCD_BUSY_MASK) != 0) {
int start = USEC_TIMER;
do {
if ((LCD_BASE & LCD_BUSY_MASK) == 0) break;
} while (timer_check(start, 1000) == 0);
}
}
/* Send command */
static inline void lcd_send_cmd(int v)
{
lcd_wait_write();
LCD_BASE = 0x00000000 | LCD_CMD;
LCD_BASE = v | LCD_CMD;
}
/* Send 16-bit data */
static inline void lcd_send_data(int v)
{
lcd_wait_write();
LCD_BASE = ( v & 0xff) | LCD_DATA; /* Send MSB first */
LCD_BASE = ((v>>8) & 0xff) | LCD_DATA;
}
/* Send two 16-bit data */
static inline void lcd_send_data2(int v)
{
unsigned int vsr = v;
lcd_send_data(vsr);
vsr = v >> 16;
lcd_send_data(vsr);
}
/*** hardware configuration ***/
void lcd_set_contrast(int val)
{
/* TODO: Implement lcd_set_contrast() */
(void)val;
}
void lcd_set_invert_display(bool yesno)
{
/* TODO: Implement lcd_set_invert_display() */
(void)yesno;
}
/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
/* TODO: Implement lcd_set_flip() */
(void)yesno;
}
/* LCD init */
void lcd_init_device(void)
{
/* H10 LCD is initialised by the bootloader */
}
/*** update functions ***/
/* Performance function that works with an external buffer
note that by and bheight are in 4-pixel units! */
void lcd_blit(const fb_data* data, int x, int by, int width,
int bheight, int stride)
{
/* TODO: Implement lcd_blit() */
(void)data;
(void)x;
(void)by;
(void)width;
(void)bheight;
(void)stride;
}
#define CSUB_X 2
#define CSUB_Y 2
#define RYFAC (31*257)
#define GYFAC (31*257)
#define BYFAC (31*257)
#define RVFAC 11170 /* 31 * 257 * 1.402 */
#define GVFAC (-5690) /* 31 * 257 * -0.714136 */
#define GUFAC (-2742) /* 31 * 257 * -0.344136 */
#define BUFAC 14118 /* 31 * 257 * 1.772 */
#define ROUNDOFFS (127*257)
#define ROUNDOFFSG (63*257)
/* Performance function to blit a YUV bitmap directly to the LCD */
void lcd_yuv_blit(unsigned char * const src[3],
int src_x, int src_y, int stride,
int x, int y, int width, int height)
{
int y0, x0, y1, x1;
int ymax;
width = (width + 1) & ~1;
/* calculate the drawing region */
x0 = x;
x1 = x + width - 1;
y0 = y;
y1 = y + height - 1;
/* start horiz << 8 | max horiz */
lcd_send_cmd(R_HORIZ_RAM_ADDR_POS);
lcd_send_data((x0 << 8) | x1);
/* start vert << 8 | max vert */
lcd_send_cmd(R_VERT_RAM_ADDR_POS);
lcd_send_data((y0 << 8) | y1);
/* start horiz << 8 | start vert */
lcd_send_cmd(R_RAM_ADDR_SET);
lcd_send_data(((x0 << 8) | y0));
/* start drawing */
lcd_send_cmd(R_WRITE_DATA_2_GRAM);
ymax = y + height - 1 ;
const int stride_div_csub_x = stride/CSUB_X;
for (; y <= ymax ; y++)
{
/* upsampling, YUV->RGB conversion and reduction to RGB565 in one go */
const unsigned char *ysrc = src[0] + stride * src_y + src_x;
const int uvoffset = stride_div_csub_x * (src_y/CSUB_Y) +
(src_x/CSUB_X);
const unsigned char *usrc = src[1] + uvoffset;
const unsigned char *vsrc = src[2] + uvoffset;
const unsigned char *row_end = ysrc + width;
int y, u, v;
int red1, green1, blue1;
int red2, green2, blue2;
unsigned rbits, gbits, bbits;
int rc, gc, bc;
do
{
u = *usrc++ - 128;
v = *vsrc++ - 128;
rc = RVFAC * v + ROUNDOFFS;
gc = GVFAC * v + GUFAC * u + ROUNDOFFSG;
bc = BUFAC * u + ROUNDOFFS;
/* Pixel 1 */
y = *ysrc++;
red1 = RYFAC * y + rc;
green1 = GYFAC * y + gc;
blue1 = BYFAC * y + bc;
/* Pixel 2 */
y = *ysrc++;
red2 = RYFAC * y + rc;
green2 = GYFAC * y + gc;
blue2 = BYFAC * y + bc;
/* Since out of bounds errors are relatively rare, we check two
pixels at once to see if any components are out of bounds, and
then fix whichever is broken. This works due to high values and
negative values both becoming larger than the cutoff when
casted to unsigned. And ORing them together checks all of them
simultaneously. */
if (((unsigned)(red1 | green1 | blue1 |
red2 | green2 | blue2)) > (RYFAC*255+ROUNDOFFS)) {
if (((unsigned)(red1 | green1 | blue1)) >
(RYFAC*255+ROUNDOFFS)) {
if ((unsigned)red1 > (RYFAC*255+ROUNDOFFS))
{
if (red1 < 0)
red1 = 0;
else
red1 = (RYFAC*255+ROUNDOFFS);
}
if ((unsigned)green1 > (GYFAC*255+ROUNDOFFSG))
{
if (green1 < 0)
green1 = 0;
else
green1 = (GYFAC*255+ROUNDOFFSG);
}
if ((unsigned)blue1 > (BYFAC*255+ROUNDOFFS))
{
if (blue1 < 0)
blue1 = 0;
else
blue1 = (BYFAC*255+ROUNDOFFS);
}
}
if (((unsigned)(red2 | green2 | blue2)) >
(RYFAC*255+ROUNDOFFS)) {
if ((unsigned)red2 > (RYFAC*255+ROUNDOFFS))
{
if (red2 < 0)
red2 = 0;
else
red2 = (RYFAC*255+ROUNDOFFS);
}
if ((unsigned)green2 > (GYFAC*255+ROUNDOFFSG))
{
if (green2 < 0)
green2 = 0;
else
green2 = (GYFAC*255+ROUNDOFFSG);
}
if ((unsigned)blue2 > (BYFAC*255+ROUNDOFFS))
{
if (blue2 < 0)
blue2 = 0;
else
blue2 = (BYFAC*255+ROUNDOFFS);
}
}
}
rbits = red1 >> 16 ;
gbits = green1 >> 15 ;
bbits = blue1 >> 16 ;
lcd_send_data(swap16((rbits << 11) | (gbits << 5) | bbits));
rbits = red2 >> 16 ;
gbits = green2 >> 15 ;
bbits = blue2 >> 16 ;
lcd_send_data(swap16((rbits << 11) | (gbits << 5) | bbits));
}
while (ysrc < row_end);
src_y++;
}
}
/* Update a fraction of the display. */
void lcd_update_rect(int x0, int y0, int width, int height)
{
int x1, y1;
int newx,newwidth;
unsigned long *addr = (unsigned long *)lcd_framebuffer;
/* Ensure x and width are both even - so we can read 32-bit aligned
data from lcd_framebuffer */
newx=x0&~1;
newwidth=width&~1;
if (newx+newwidth < x0+width) { newwidth+=2; }
x0=newx; width=newwidth;
/* calculate the drawing region */
y1 = (y0 + height) - 1; /* max vert */
x1 = (x0 + width) - 1; /* max horiz */
/* swap max horiz < start horiz */
if (y1 < y0) {
int t;
t = y0;
y0 = y1;
y1 = t;
}
/* swap max vert < start vert */
if (x1 < x0) {
int t;
t = x0;
x0 = x1;
x1 = t;
}
/* start horiz << 8 | max horiz */
lcd_send_cmd(R_HORIZ_RAM_ADDR_POS);
lcd_send_data((x0 << 8) | x1);
/* start vert << 8 | max vert */
lcd_send_cmd(R_VERT_RAM_ADDR_POS);
lcd_send_data((y0 << 8) | y1);
/* start horiz << 8 | start vert */
lcd_send_cmd(R_RAM_ADDR_SET);
lcd_send_data(((x0 << 8) | y0));
/* start drawing */
lcd_send_cmd(R_WRITE_DATA_2_GRAM);
addr = (unsigned long*)&lcd_framebuffer[y0][x0];
int c, r;
/* for each row */
for (r = 0; r < height; r++) {
/* for each column */
for (c = 0; c < width; c += 2) {
/* output 2 pixels */
lcd_send_data2(*(addr++));
}
addr += (LCD_WIDTH - width)/2;
}
}
/* Update the display.
This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
}
Reference in a new issue View git blame Copy permalink