| .. |
|
audio
|
e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200.
|
2010-06-26 10:07:17 +00:00 |
|
rtc
|
AMSv2 RTC: no need to write to RTC_WAKEUP register
|
2010-06-17 05:28:38 +00:00 |
|
tuner
|
Sanyo lv24020lp FM: Improve frequency measurement on PP thus improving initial frequency setting. Properly account for IF when tuning FM oscillator (this worked poorly before but appears to work as expected now -- aka. works for me). Not sure what this will do to iAudio7 or Cowon D2 but if they can implement a good duration measurement, they should do so or use the internal timer if possible.
|
2010-06-22 07:27:34 +00:00 |
|
ata.c
|
ata: do some threading-related corrections (some sync related where it matters). Make sure 'sleeping' is 'false' before the powerup sequence (throws-off powermgmt and it *is* about to woken again and powermgmt will need to compensate). Avoid looking at mutex flag directly; there's no tangible benefit I can discern and changes to the kernel that alter the meaning shouldn't be able to break anything. For that, in the jz sd driver, have sd_disk_is_active just return 'false' like all the other SD drivers do. If it *must* return this, it should implement it's own method but it seems to not matter.
|
2010-05-21 15:33:31 +00:00 |
|
ata_flash.c
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
ata_mmc.c
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
button.c
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
dac.c
|
|
|
|
dac.h
|
Final removal of tabs in firmware path
|
2010-01-03 11:31:14 +00:00 |
|
eeprom_24cxx.c
|
|
|
|
fat.c
|
Add IO priority handling. Currently all IO has equal priority, except the dircache scanning thread which is lower. This fixes the slow boot problem for me, with the added benefit that actual audio playback also starts faster.
|
2010-04-03 22:02:09 +00:00 |
|
fmradio.c
|
|
|
|
generic_i2c.c
|
Apply FS #11423 - Use udelay in AMS driver for FM radio I2C
|
2010-06-21 21:41:07 +00:00 |
|
i2c.c
|
Add missing mutex_init to i2c driver
|
2009-07-10 17:46:35 +00:00 |
|
isp1362.c
|
|
|
|
isp1583.c
|
FS#10226 - isp1583.c code cosmetics
|
2009-10-01 05:40:20 +00:00 |
|
lcd-1bit-vert.c
|
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
|
2010-05-18 12:27:20 +00:00 |
|
lcd-2bit-horz.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-2bit-vert.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-2bit-vi.c
|
Rename sdl lcd initialization to (remote_)lcd_init_device which enables removing two #ifdef SIMULATOR and makes it happen as on target.
|
2010-05-18 12:27:20 +00:00 |
|
lcd-16bit-vert.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-16bit.c
|
Comment out lcd_drawline() DEBUGF messages which show in various simulators
|
2010-02-20 06:42:45 +00:00 |
|
lcd-bitmap-common.c
|
avoid overflow in puts_scroll().
|
2010-05-21 13:30:21 +00:00 |
|
lcd-charcell.c
|
avoid overflow in puts_scroll().
|
2010-05-21 13:30:21 +00:00 |
|
lcd-charset-player.c
|
Final removal of tabs in firmware path
|
2010-01-03 11:31:14 +00:00 |
|
lcd-remote-1bit-v.c
|
|
|
|
lcd-remote-2bit-vi.c
|
|
|
|
led.c
|
|
|
|
m5636.c
|
|
|
|
m66591.c
|
M66591 Driver: Correct some comments.
|
2010-03-17 01:43:15 +00:00 |
|
mas.c
|
|
|
|
nand_id.c
|
TCC NAND: The BLOCKS_PER_SEGMENT define was actually the number of planes mentioned in the Samsung NAND datasheet. Add this to the nand_id struct, so that it can be runtime detected (required for some D2s to boot). Use the struct directly instead of making a local copy, and format the nand_info table to 80 columns.
|
2009-03-02 23:36:12 +00:00 |
|
pcf50605.c
|
|
|
|
pcf50606.c
|
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
|
2009-10-11 21:12:06 +00:00 |
|
pcf50635.c
|
D2: Reduce binsize a bit by using arrays for the PMU initialisation.
|
2009-10-11 21:12:06 +00:00 |
|
qt1106.c
|
|
|
|
ramdisk.c
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
sd.c
|
remane hotswap.* to sdmmc.*. The contents have nothing at all to do with hotswapping things
|
2010-06-05 21:12:16 +00:00 |
|
serial.c
|
Simplify some boolean expressions that compare directly against 'true'
|
2010-01-02 16:03:30 +00:00 |
|
sw_i2c.c
|
|
|
|
synaptics-mep.c
|
synaptics: add a small delay in syn_get_data() for PB Vibe. Touchpad doesn't work when build with EABI without it.
|
2010-06-24 20:29:56 +00:00 |
|
touchscreen.c
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
tsc200x.c
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
|
tsc2100.c
|
M:Robe 500: Fix FIQ's and make the audio DMA a FIQ, simplify the ADC code and make it more reliable. Fix ADC problems on initial boot.
|
2009-12-12 18:36:52 +00:00 |
b15a523870