Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/target/arm/as3525/system-as3525.c
Bertrik Sikken b1298c2c44 Sansa AMS/AMSv2: analog front-end register CVDD/DCDC3 doesn't exist in AMSv2, so don't modify it 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30579 a1c6a512-1295-4272-9138-f99709370657
2011-09-21 21:48:19 +00:00

444 lines
13 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2007 by Rob Purchase
* Copyright © 2008 Rafaël Carré
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#include "config.h"
#include "kernel.h"
#include "system.h"
#include "panic.h"
#include "ascodec-target.h"
#include "adc.h"
#include "dma-target.h"
#include "clock-target.h"
#include "fmradio_i2c.h"
#include "button-target.h"
#include "backlight-target.h"
#include "lcd.h"
#define default_interrupt(name) \
extern __attribute__((weak,alias("UIRQ"))) void name (void)
static void UIRQ (void) __attribute__((interrupt ("IRQ")));
void irq_handler(void) __attribute__((interrupt ("IRQ")));
void fiq_handler(void) __attribute__((interrupt ("FIQ")));
default_interrupt(INT_WATCHDOG);
default_interrupt(INT_TIMER1);
default_interrupt(INT_TIMER2);
default_interrupt(INT_USB);
default_interrupt(INT_DMAC);
default_interrupt(INT_NAND);
default_interrupt(INT_IDE);
default_interrupt(INT_MCI0);
default_interrupt(INT_MCI1);
default_interrupt(INT_AUDIO);
default_interrupt(INT_SSP);
default_interrupt(INT_I2C_MS);
default_interrupt(INT_I2C_AUDIO);
default_interrupt(INT_I2SIN);
default_interrupt(INT_I2SOUT);
default_interrupt(INT_UART);
default_interrupt(INT_GPIOD);
default_interrupt(RESERVED1); /* Interrupt 17 : unused */
default_interrupt(INT_CGU);
default_interrupt(INT_MEMORY_STICK);
default_interrupt(INT_DBOP);
default_interrupt(RESERVED2); /* Interrupt 21 : unused */
default_interrupt(RESERVED3); /* Interrupt 22 : unused */
default_interrupt(RESERVED4); /* Interrupt 23 : unused */
default_interrupt(RESERVED5); /* Interrupt 24 : unused */
default_interrupt(RESERVED6); /* Interrupt 25 : unused */
default_interrupt(RESERVED7); /* Interrupt 26 : unused */
default_interrupt(RESERVED8); /* Interrupt 27 : unused */
default_interrupt(RESERVED9); /* Interrupt 28 : unused */
/* INT_GPIOA is declared in this file */
void INT_GPIOA(void);
default_interrupt(INT_GPIOB);
default_interrupt(INT_GPIOC);
static const char * const irqname[] =
{
"INT_WATCHDOG", "INT_TIMER1", "INT_TIMER2", "INT_USB", "INT_DMAC", "INT_NAND",
"INT_IDE", "INT_MCI0", "INT_MCI1", "INT_AUDIO", "INT_SSP", "INT_I2C_MS",
"INT_I2C_AUDIO", "INT_I2SIN", "INT_I2SOUT", "INT_UART", "INT_GPIOD", "RESERVED1",
"INT_CGU", "INT_MEMORY_STICK", "INT_DBOP", "RESERVED2", "RESERVED3", "RESERVED4",
"RESERVED5", "RESERVED6", "RESERVED7", "RESERVED8", "RESERVED9", "INT_GPIOA",
"INT_GPIOB", "INT_GPIOC"
};
static void UIRQ(void)
{
bool masked = false;
int status = VIC_IRQ_STATUS;
if(status == 0)
{
status = VIC_RAW_INTR; /* masked interrupts */
masked = true;
}
if(status == 0)
panicf("Unhandled IRQ (source unknown!)");
unsigned irq_no = 31 - __builtin_clz(status);
panicf("Unhandled %smasked IRQ %02X: %s (status 0x%8X)",
masked ? "" : "un", irq_no, irqname[irq_no], status);
}
/* Vectored interrupts (16 available) */
static const struct { int source; void (*isr) (void); } vec_int_srcs[] =
{
/* Highest priority at the top of the list */
{ INT_SRC_DMAC, INT_DMAC },
{ INT_SRC_NAND, INT_NAND },
#if (defined HAVE_MULTIDRIVE && CONFIG_CPU == AS3525)
{ INT_SRC_MCI0, INT_MCI0 },
#endif
{ INT_SRC_USB, INT_USB, },
#ifdef HAVE_RECORDING
{ INT_SRC_I2SIN, INT_I2SIN, },
#endif
{ INT_SRC_TIMER1, INT_TIMER1 },
{ INT_SRC_TIMER2, INT_TIMER2 },
{ INT_SRC_I2C_AUDIO, INT_I2C_AUDIO },
{ INT_SRC_AUDIO, INT_AUDIO },
#if defined(HAVE_HOTSWAP) || \
(defined(SANSA_FUZEV2) && !INCREASED_SCROLLWHEEL_POLLING)
{ INT_SRC_GPIOA, INT_GPIOA, },
#endif
/* Lowest priority at the end of the list */
};
static void setup_vic(void)
{
const unsigned int n = sizeof(vec_int_srcs)/sizeof(vec_int_srcs[0]);
unsigned int i;
CGU_PERI |= CGU_VIC_CLOCK_ENABLE; /* enable VIC */
VIC_INT_EN_CLEAR = 0xffffffff; /* disable all interrupt lines */
VIC_INT_SELECT = 0; /* only IRQ, no FIQ */
*VIC_DEF_VECT_ADDR = UIRQ;
for(i = 0; i < n; i++)
{
VIC_VECT_ADDRS[i] = vec_int_srcs[i].isr;
VIC_VECT_CNTLS[i] = (1<<5) | vec_int_srcs[i].source;
}
}
void INT_GPIOA(void)
{
#ifdef HAVE_HOTSWAP
void sd_gpioa_isr(void);
sd_gpioa_isr();
#endif
#if defined(SANSA_FUZEV2) && !INCREASED_SCROLLWHEEL_POLLING
void button_gpioa_isr(void);
button_gpioa_isr();
#endif
}
void irq_handler(void)
{
(*VIC_VECT_ADDR)(); /* call the isr */
*VIC_VECT_ADDR = (void*)VIC_VECT_ADDR; /* any write will ack the irq */
}
void fiq_handler(void)
{
}
#if defined(SANSA_C200V2)
int c200v2_variant;
static void check_model_variant(void)
{
unsigned int i;
unsigned int saved_dir = GPIOA_DIR;
/* Make A7 input */
GPIOA_DIR &= ~(1<<7);
/* wait a little to allow the pullup/pulldown resistor
* to charge the input capacitance */
for (i=0; i<1000; i++) asm volatile ("nop\n");
/* read the pullup/pulldown value on A7 to determine the variant */
c200v2_variant = !GPIOA_PIN(7);
GPIOA_DIR = saved_dir;
}
#elif defined(SANSA_FUZEV2) || defined(SANSA_CLIPPLUS)
int amsv2_variant;
static void check_model_variant(void)
{
GPIOB_DIR &= ~(1<<5);
amsv2_variant = !!GPIOB_PIN(5);
}
#else
static inline void check_model_variant(void)
{
}
#endif /* model selection */
void system_init(void)
{
#if CONFIG_CPU == AS3525v2
CCU_SRC = 0x57D7BF0;
#else
CCU_SRC = 0x1fffff0
& ~CCU_SRC_IDE_EN; /* FIXME */
#endif
unsigned int reset_loops = 640;
while(reset_loops--)
CCU_SRL = CCU_SRL_MAGIC_NUMBER;
CCU_SRC = CCU_SRL = 0;
CCU_SCON = 1; /* AHB master's priority configuration :
TIC (Test Interface Controller) > DMA > USB > IDE > ARM */
CGU_PROC = 0; /* fclk 24 MHz */
#if CONFIG_CPU == AS3525v2
/* pclk is always based on PLLA, since we don't know the current PLLA speed,
* avoid having pclk too fast and hope it's not too low */
CGU_PERI |= 0xf << 2; /* pclk lowest */
#else
CGU_PERI &= ~0x7f; /* pclk 24 MHz */
#endif
/* bits 31:30 should be set to 0 in arm926-ejs */
asm volatile(
"mrc p15, 0, r0, c1, c0 \n" /* control register */
"bic r0, r0, #3<<30 \n" /* clears bus bits : sets fastbus */
"mcr p15, 0, r0, c1, c0 \n"
: : : "r0" );
CGU_COUNTA = CGU_LOCK_CNT;
CGU_PLLA = AS3525_PLLA_SETTING;
CGU_PLLASUP = 0; /* enable PLLA */
while(!(CGU_INTCTRL & CGU_PLLA_LOCK)); /* wait until PLLA is locked */
#if AS3525_MCLK_SEL == AS3525_CLK_PLLB
CGU_COUNTB = CGU_LOCK_CNT;
CGU_PLLB = AS3525_PLLB_SETTING;
CGU_PLLBSUP = 0; /* enable PLLB */
while(!(CGU_INTCTRL & CGU_PLLB_LOCK)); /* wait until PLLB is locked */
#endif
/* Set FCLK frequency */
CGU_PROC = ((AS3525_FCLK_POSTDIV << 4) |
(AS3525_FCLK_PREDIV << 2) |
AS3525_FCLK_SEL);
/* Set PCLK frequency */
CGU_PERI = ((CGU_PERI & ~0x7F) | /* reset divider & clksel bits */
(AS3525_PCLK_DIV0 << 2) |
#if CONFIG_CPU == AS3525
(AS3525_PCLK_DIV1 << 6) |
#endif
AS3525_PCLK_SEL);
set_cpu_frequency(CPUFREQ_DEFAULT);
#if 0 /* the GPIO clock is already enabled by the dualboot function */
CGU_PERI |= CGU_GPIO_CLOCK_ENABLE;
#endif
/* enable timer interface for TIMER1 & TIMER2 */
CGU_PERI |= CGU_TIMERIF_CLOCK_ENABLE;
setup_vic();
dma_init();
ascodec_init();
/* Initialize power management settings */
#ifdef HAVE_AS3543
/* PLL: disable audio PLL, we use MCLK already */
ascodec_write_pmu(0x1A, 7, 0x02);
/* DCDC_Cntr: set switching speed of CVDD1/2 power supplies to 1 MHz */
ascodec_write_pmu(0x17, 7, 0x30);
/* Out_Cntr2: set drive strength of 24 MHz and 32 kHz clocks to 1 mA */
ascodec_write_pmu(0x1A, 2, 0xCC);
/* CHGVBUS2: set VBUS threshold to 3.18V and EOC threshold to 30% CC */
ascodec_write_pmu(0x19, 2, 0x41);
#if 0 /* don't set higher voltage until impact on runtime has been checked */
/* PVDD1: set PVDD1 power supply to 2.5 V */
ascodec_write_pmu(0x18, 1, 0x35);
/* AVDD17: set AVDD17 power supply to 2.5V */
ascodec_write_pmu(0x18, 7, 0x31);
#endif
#else
ascodec_write(AS3514_CVDD_DCDC3, AS314_CP_DCDC3_SETTING);
#endif /* HAVE_AS3543 */
#ifndef BOOTLOADER
/* setup isr for microsd monitoring and for fuzev2 scrollwheel irq */
#if defined(HAVE_HOTSWAP) || \
(defined(SANSA_FUZEV2) && !INCREASED_SCROLLWHEEL_POLLING)
VIC_INT_ENABLE = (INTERRUPT_GPIOA);
/* pin selection for irq happens in the drivers */
#endif
#if CONFIG_TUNER
fmradio_i2c_init();
#endif
#endif /* !BOOTLOADER */
check_model_variant();
}
void system_reboot(void)
{
_backlight_off();
disable_irq();
/* use watchdog to reset */
CGU_PERI |= (CGU_WDOCNT_CLOCK_ENABLE | CGU_WDOIF_CLOCK_ENABLE);
WDT_LOAD = 1; /* set counter to 1 */
WDT_CONTROL = 3; /* enable watchdog counter & reset */
while(1);
}
void system_exception_wait(void)
{
/* make sure lcd+backlight are on */
_backlight_panic_on();
/* make sure screen content is up to date */
lcd_update();
/* wait until button release (if a button is pressed) */
while(button_read_device());
/* then wait until next button press */
while(!button_read_device());
}
int system_memory_guard(int newmode)
{
(void)newmode;
return 0;
}
/* usecs may be at most 2^32/248 (17 seconds) for 248MHz max cpu freq */
void udelay(unsigned usecs)
{
unsigned cycles_per_usec;
unsigned delay;
if (cpu_frequency == CPUFREQ_MAX) {
cycles_per_usec = (CPUFREQ_MAX + 999999) / 1000000;
} else {
cycles_per_usec = (CPUFREQ_NORMAL + 999999) / 1000000;
}
delay = (usecs * cycles_per_usec + 3) / 4;
asm volatile(
"1: subs %0, %0, #1 \n" /* 1 cycle */
" bne 1b \n" /* 3 cycles */
: : "r"(delay)
);
}
#ifndef BOOTLOADER
#ifdef HAVE_ADJUSTABLE_CPU_FREQ
#if CONFIG_CPU == AS3525
void set_cpu_frequency(long frequency)
{
if(frequency == CPUFREQ_MAX)
{
#ifdef HAVE_ADJUSTABLE_CPU_VOLTAGE
/* Increasing frequency so boost voltage before change */
ascodec_write(AS3514_CVDD_DCDC3, (AS314_CP_DCDC3_SETTING | CVDD_1_20));
/* Some players run a bit low so use 1.175 volts instead of 1.20 */
/* Wait for voltage to be at least 1.175v before making fclk > 200 MHz */
while(adc_read(ADC_CVDD) < 470); /* 470 * .0025 = 1.175V */
#endif /* HAVE_ADJUSTABLE_CPU_VOLTAGE */
CGU_PROC = ((AS3525_FCLK_POSTDIV << 4) |
(AS3525_FCLK_PREDIV << 2) |
AS3525_FCLK_SEL);
asm volatile(
"mrc p15, 0, r0, c1, c0 \n"
"orr r0, r0, #3<<30 \n" /* asynchronous bus clocking */
/* synchronous bus clocking had issues on some players */
"mcr p15, 0, r0, c1, c0 \n"
: : : "r0" );
cpu_frequency = CPUFREQ_MAX;
}
else
{
asm volatile(
"mrc p15, 0, r0, c1, c0 \n"
"bic r0, r0, #3<<30 \n" /* fastbus clocking */
"mcr p15, 0, r0, c1, c0 \n"
: : : "r0" );
/* FCLK is unused so put it to the lowest freq we can */
CGU_PROC = ((0xf << 4) | (0x3 << 2) | AS3525_CLK_MAIN);
#ifdef HAVE_ADJUSTABLE_CPU_VOLTAGE
/* Decreasing frequency so reduce voltage after change */
ascodec_write(AS3514_CVDD_DCDC3, (AS314_CP_DCDC3_SETTING | CVDD_1_10));
#endif /* HAVE_ADJUSTABLE_CPU_VOLTAGE */
cpu_frequency = CPUFREQ_NORMAL;
}
}
#else /* as3525v2 */
/* FIXME : disabled for now, seems to cause buggy memory accesses
* Disabling MMU or putting the function in uncached memory seems to help? */
void set_cpu_frequency(long frequency)
{
int oldstatus = disable_irq_save();
/* We only have 2 settings */
cpu_frequency = (frequency == CPUFREQ_MAX) ? frequency : CPUFREQ_NORMAL;
if(frequency == CPUFREQ_MAX)
{
/* Change PCLK while FCLK is low, so it doesn't go too high */
CGU_PERI = (CGU_PERI & ~(0xF << 2)) | (AS3525_PCLK_DIV0 << 2);
CGU_PROC = ((AS3525_FCLK_POSTDIV << 4) |
(AS3525_FCLK_PREDIV << 2) |
AS3525_FCLK_SEL);
}
else
{
CGU_PROC = ((AS3525_FCLK_POSTDIV_UNBOOSTED << 4) |
(AS3525_FCLK_PREDIV << 2) |
AS3525_FCLK_SEL);
/* Change PCLK after FCLK is low, so it doesn't go too high */
CGU_PERI = (CGU_PERI & ~(0xF << 2)) | (AS3525_PCLK_DIV0_UNBOOSTED << 2);
}
restore_irq(oldstatus);
}
#endif
#endif /* HAVE_ADJUSTABLE_CPU_FREQ */
#endif /* !BOOTLOADER */
Reference in a new issue View git blame Copy permalink