| .. |
|
adc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
as3514.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
as3525.h
|
Commit second part of FS#9663 by Thomas Martitz. Enable button light on fuze and e200v2.
|
2009-01-18 18:49:36 +00:00 |
|
ascodec.h
|
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
|
2008-10-31 00:37:58 +00:00 |
|
ata.h
|
*_hard_reset() is only used inside ata.c, so there's no need to export it to the world
|
2008-11-04 19:37:28 +00:00 |
|
ata_idle_notify.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
ata_mmc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio.h
|
Keyclick fixup take two. It is only 88 samples (2msec) long so keep a small static buffer around for beeps less than or equal to keyclick duration. This way it operates no matter the buffer state and still won't interfere with alternate PCM operations like recording or plugin playback.
|
2008-12-13 06:01:08 +00:00 |
|
audiohw.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
backlight-thread-fading.h
|
...and spell the property names correctly.
|
2008-11-26 08:28:54 +00:00 |
|
backlight.h
|
Add hardware backlight fading on Gigabeat S with fade up and down options in LCD Settings. USE_BACKLIGHT_CUSTOM_FADING_BOOL is used to specify the setting type needed but leave the fading code itself implementation-defined.
|
2008-11-26 21:26:22 +00:00 |
|
bidi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bitswap.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
buffer.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button.h
|
Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN
|
2008-08-23 09:46:38 +00:00 |
|
config-c100.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-c200.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
config-c200v2.h
|
Commit FS#9679 by Thomas Martitz. Adds c200v2 to the target tree. Has some buttons defined, a bootloader, and stubs for most drivers.
|
2008-12-24 04:10:18 +00:00 |
|
config-clip.h
|
Commit stable parts of FS#9611 - Sansa Clip radio code
|
2009-01-21 20:51:43 +00:00 |
|
config-cowond2.h
|
revert accidental commit of unrelated files
|
2008-12-21 16:32:13 +00:00 |
|
config-creativezv.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-creativezvm.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-creativezvm60gb.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-e200.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
config-e200v2.h
|
Commit stable parts of FS#9611 - Sansa Clip radio code
|
2009-01-21 20:51:43 +00:00 |
|
config-fmrecorder.h
|
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
|
2009-01-13 14:41:29 +00:00 |
|
config-fuze.h
|
Commit stable parts of FS#9611 - Sansa Clip radio code
|
2009-01-21 20:51:43 +00:00 |
|
config-gigabeat-s.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
config-gigabeat.h
|
Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.
|
2008-12-12 11:01:07 +00:00 |
|
config-h10.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h10_5gb.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-h100.h
|
H10 can distinguish USB and MAIN charger input so return proper flags. H100s were misconfigured and should use CHARGING_SIMPLE. Comment more on what charging types mean in config.h.
|
2008-12-24 19:36:37 +00:00 |
|
config-h120.h
|
H10 can distinguish USB and MAIN charger input so return proper flags. H100s were misconfigured and should use CHARGING_SIMPLE. Comment more on what charging types mean in config.h.
|
2008-12-24 19:36:37 +00:00 |
|
config-h300.h
|
Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code).
|
2008-12-24 16:58:41 +00:00 |
|
config-hdd1630.h
|
Philips HDD1630 lcd work: register defines and enable contrast, flip, and inverse.
|
2009-01-21 02:23:29 +00:00 |
|
config-iaudio7.h
|
i7: set low-battery values and enable shutdown on low-battery
|
2008-12-26 19:31:48 +00:00 |
|
config-iaudiom3.h
|
Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code).
|
2008-12-24 16:58:41 +00:00 |
|
config-iaudiom5.h
|
Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code).
|
2008-12-24 16:58:41 +00:00 |
|
config-iaudiox5.h
|
Simplify powermgmt thread loops so it calls functions turn (no more power_thread_sleep). Do other target-friendly simplifications, generic battery switch handling and split sim-specific code. Whoever can, please verify charging on the Archos Recorder (due to change in the charger duty cycle code).
|
2008-12-24 16:58:41 +00:00 |
|
config-ifp7xx.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod1g2g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod3g.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-ipod4g.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
config-ipodcolor.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
config-ipodmini.h
|
Add very rough battery life estimateion for iPod minis. Also, update Sansav1 estimation while I'm at it.
|
2009-01-02 03:16:12 +00:00 |
|
config-ipodmini2g.h
|
Add very rough battery life estimateion for iPod minis. Also, update Sansav1 estimation while I'm at it.
|
2009-01-02 03:16:12 +00:00 |
|
config-ipodnano.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
config-ipodvideo.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
config-logikdax.h
|
Replace USE_HIGH_SPEED with USB_NO_HIGH_SPEED, as high speed support is the normal case
|
2008-11-30 15:53:36 +00:00 |
|
config-m200.h
|
fix reds
|
2008-11-01 16:49:38 +00:00 |
|
config-m200v4.h
|
Sansa AMS: PCM driver (FS#9592)
|
2008-12-04 22:27:48 +00:00 |
|
config-meizu-m3.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-meizu-m6sl.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-meizu-m6sp.h
|
Add new storage-related defines for meizu
|
2008-11-01 17:25:49 +00:00 |
|
config-mrobe100.h
|
Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.
|
2008-12-12 11:01:07 +00:00 |
|
config-mrobe500.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
config-ondavx747.h
|
Ingenic players:
|
2008-12-31 01:11:04 +00:00 |
|
config-ondavx747p.h
|
Fix SVN properties
|
2008-12-19 11:29:18 +00:00 |
|
config-ondavx767.h
|
Fix SVN properties
|
2008-12-19 11:29:18 +00:00 |
|
config-ondiofm.h
|
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
|
2009-01-13 14:41:29 +00:00 |
|
config-ondiosp.h
|
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
|
2009-01-13 14:41:29 +00:00 |
|
config-player.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-recorder.h
|
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
|
2009-01-13 14:41:29 +00:00 |
|
config-recorderv2.h
|
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
|
2009-01-13 14:41:29 +00:00 |
|
config-sa9200.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config-tpj1022.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
config.h
|
support pixel aspect ratio compensation in recalc_dimension, with PAR defined as 1:1 by default, and set to 4:5 for archos bitmap targets
|
2009-01-13 14:41:29 +00:00 |
|
config_caps.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
cpu.h
|
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
|
2008-10-12 16:46:01 +00:00 |
|
debug.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
disk.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
dm320.h
|
Fix up ZVM builds. It appeared to share common definitions with PP502x targets so use those. Remove one stale comment left behind in last commit.
|
2009-01-19 14:06:47 +00:00 |
|
ds2411.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_24cxx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_settings.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.h
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
events.h
|
Accept FS#9480 - centralise and organise the events in the apps/ layer.
|
2008-10-16 10:38:03 +00:00 |
|
fat.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
fmradio.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fmradio_i2c.h
|
Fix red.
|
2008-12-21 20:31:31 +00:00 |
|
font.h
|
Added support for configurable rockbox directory. FS#9567 by Alex Bennee.
|
2008-11-24 22:16:07 +00:00 |
|
gdb_api.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.h
|
remove align_buffer from firmare/general.c, replacing with ALIGN_BUFFER macro, and replace all uses of it (only resize.c in core, and pictureflow and mpegplayer plugins), remove it from plugin_api,
|
2009-01-13 13:48:26 +00:00 |
|
generic_i2c.h
|
Generic I2C: fix various problems with this (now) unused driver
|
2008-12-07 19:25:51 +00:00 |
|
hangul.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hd66789r.h
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
hotswap.h
|
cleanup storage defines
|
2008-10-31 21:25:04 +00:00 |
|
hwcompat.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-coldfire.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
iap.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
ifp_usb_serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
imx31l.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
isp1362.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
isp1583.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
jz4740.h
|
Ingenic Jz4740:
|
2008-12-31 18:15:24 +00:00 |
|
jz_mxu.h
|
Ingenic Jz4740:
|
2008-12-31 01:57:07 +00:00 |
|
kernel.h
|
Unify kernel list management for ticks, registered queues and timeout objects by using NULL-terminated lists of pointers. Redo timeout API a bit to simplify it and integrate it. Should give some small binsize reduction accross the board but more if timeout objects are being included.
|
2009-01-21 02:44:20 +00:00 |
|
lcd-charcell.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-remote.h
|
Latest work on the bmp on-load scaler:
|
2008-12-26 07:03:22 +00:00 |
|
lcd.h
|
Latest work on the bmp on-load scaler:
|
2008-12-26 07:03:22 +00:00 |
|
led.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.h
|
Commit FS#9733 (multiline logf) by Yoshihisa Uchida
|
2008-12-31 17:01:00 +00:00 |
|
ltv350qv.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lv24020lp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
m5636.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mas.h
|
Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
|
2008-10-14 11:12:20 +00:00 |
|
mas35xx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783.h
|
MC13783 PMIC: Make some defines more strictly correct-- interrupts, etc.
|
2008-11-19 06:22:09 +00:00 |
|
mcf5249.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mcf5250.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mips-archdefs.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mips.h
|
And set svn:eol-style ...
|
2008-07-14 15:19:29 +00:00 |
|
mipsregs.h
|
Onda VX747:
|
2008-11-04 20:30:01 +00:00 |
|
mmc.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
mp3_playback.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mv.h
|
Now also commit added files
|
2008-11-01 16:25:04 +00:00 |
|
nand.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
nand_id.h
|
Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
|
2008-11-01 16:14:28 +00:00 |
|
panic.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf5060x.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50605.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50606.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm.h
|
Keyclick fixup take two. It is only 88 samples (2msec) long so keep a small static buffer around for beeps less than or equal to keyclick duration. This way it operates no matter the buffer state and still won't interfere with alternate PCM operations like recording or plugin playback.
|
2008-12-13 06:01:08 +00:00 |
|
pcm_sampr.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pl081.h
|
Sansa AMS: Use DMA for SD transfers (read and write)
|
2008-11-25 13:38:32 +00:00 |
|
pl180.h
|
Fix the Sansa AMS SD driver
|
2008-11-16 22:26:50 +00:00 |
|
pnx0101.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
power.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
powermgmt.h
|
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).
|
2009-01-11 10:07:22 +00:00 |
|
pp5002.h
|
Bring consistency to pcm implementation and samplerate handling. Less low-level duplication. A small test_sampr fix so it works on coldfire again.
|
2008-12-12 11:01:07 +00:00 |
|
pp5020.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
pp5024.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
profile.h
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
qt1106.h
|
set svn properties
|
2008-09-17 18:50:34 +00:00 |
|
r61509.h
|
Fix the LCD bug!
|
2008-07-16 15:25:35 +00:00 |
|
ramdisk.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
rolo.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rtc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s1a0903x01.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s3c2440.h
|
Meg-FX: s3c register definitions really should be unsigned. Switch from 'int' to 'unsigned long' like other targets.
|
2008-12-04 15:06:48 +00:00 |
|
s5l8700.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
scroll_engine.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sd.h
|
sd.h : avoid namespace collision by prefixing defines with SD_
|
2008-11-09 23:40:21 +00:00 |
|
serial.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
sh7034.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
si4700.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
sound.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spdif.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
storage.h
|
Since *set_led_enabled() is actually an ata-specific feature, move it back to ata_* only
|
2008-11-04 19:57:36 +00:00 |
|
structec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sw_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
synaptics-mep.h
|
Move the Synaptics touchpad driver for the m:robe 100 to a common place. It will (soon) be used for the Philips HDD1630.
|
2008-12-17 04:38:53 +00:00 |
|
system.h
|
remove align_buffer from firmare/general.c, replacing with ALIGN_BUFFER macro, and replace all uses of it (only resize.c in core, and pictureflow and mpegplayer plugins), remove it from plugin_api,
|
2009-01-13 13:48:26 +00:00 |
|
tcc77x.h
|
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
|
2008-09-06 17:50:59 +00:00 |
|
tcc780x.h
|
Add some missed bits + change MODE to TMODE
|
2008-09-22 19:27:21 +00:00 |
|
tea5767.h
|
code police : fix some multiply defined variables
|
2008-10-18 23:31:29 +00:00 |
|
thread.h
|
Unless I'm severely mistaken, we can drop a thread slot now since mpegplayer creates one less thread.
|
2009-01-05 10:57:12 +00:00 |
|
timer.h
|
Gigabeat S: Get timer API working. metronome will work now.
|
2009-01-05 00:00:29 +00:00 |
|
tlv320.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
tsc2100.h
|
Minor missing #include and static function fixes for mrobe
|
2008-09-10 20:14:22 +00:00 |
|
tuner.h
|
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
|
2008-11-11 14:46:13 +00:00 |
|
uda1380.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
usb-tcc.h
|
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
|
2008-11-30 15:43:15 +00:00 |
|
usb.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
usb_ch9.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
usb_core.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
usb_drv.h
|
USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
|
2009-01-19 13:41:25 +00:00 |
|
wm8731.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8751.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8758.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8975.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8978.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8985.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
wmcodec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
ae351903a6