a1842c04f9
With LCD driver all calculation will be performed on RGB888 and the hardware/OS can display from our 24bit framebuffer. It is not yet as performance optimized as the existing drivers but should be good enough.The vast number of small changes is due to the fact that fb_data can be a struct type now, while most of the code expected a scalar type. lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit it enforces the generic C code. All plugins are ported over. Except for rockpaint. It uses so much memory that it wouldnt fit into the 512k plugin buffer anymore (patches welcome). Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
156 lines
4.4 KiB
C
156 lines
4.4 KiB
C
/*
|
|
* This config file is for the RockBox as application on the Samsung YP-R1 player.
|
|
* The target name for ifdefs is: SAMSUNG_YPR1; or CONFIG_PLATFORM & PLAFTORM_YPR1
|
|
*/
|
|
|
|
/* We don't run on hardware directly */
|
|
/* YP-R1 need it too of course */
|
|
#define CONFIG_PLATFORM (PLATFORM_HOSTED)
|
|
|
|
/* For Rolo and boot loader */
|
|
#define MODEL_NUMBER 101
|
|
|
|
#define MODEL_NAME "Samsung YP-R1"
|
|
|
|
#define USB_NONE
|
|
|
|
/* define this if you have a bitmap LCD display */
|
|
#define HAVE_LCD_BITMAP
|
|
|
|
/* define this if you have a colour LCD */
|
|
#define HAVE_LCD_COLOR
|
|
|
|
/* Define this if the LCD can shut down */
|
|
#define HAVE_LCD_SHUTDOWN
|
|
|
|
/* define this if you have LCD enable function */
|
|
#define HAVE_LCD_ENABLE
|
|
|
|
/* define this if you want album art for this target */
|
|
#define HAVE_ALBUMART
|
|
|
|
/* define this to enable bitmap scaling */
|
|
#define HAVE_BMP_SCALING
|
|
|
|
/* define this to enable JPEG decoding */
|
|
#define HAVE_JPEG
|
|
|
|
/* define this if you have access to the quickscreen */
|
|
#define HAVE_QUICKSCREEN
|
|
|
|
/* define this if you would like tagcache to build on this target */
|
|
#define HAVE_TAGCACHE
|
|
|
|
/* We try to support both orientation, looking forward for a future dynamic switch */
|
|
#define CONFIG_ORIENTATION SCREEN_PORTRAIT
|
|
|
|
/* LCD dimensions */
|
|
#if CONFIG_ORIENTATION == SCREEN_PORTRAIT
|
|
#define LCD_WIDTH 240
|
|
#define LCD_HEIGHT 400
|
|
#else
|
|
#define LCD_WIDTH 400
|
|
#define LCD_HEIGHT 240
|
|
#endif
|
|
|
|
#define LCD_DEPTH 24
|
|
/* Calculated value, important for touch sensor */
|
|
#define LCD_DPI 180
|
|
/* Check that but should not matter */
|
|
#define LCD_PIXELFORMAT RGB888
|
|
|
|
/* Capacitive touchscreen */
|
|
#define HAVE_TOUCHSCREEN
|
|
#define HAVE_BUTTON_DATA
|
|
|
|
/* We have backlight to control */
|
|
#define HAVE_BACKLIGHT
|
|
|
|
/* Define this for LCD backlight brightness available */
|
|
#define HAVE_BACKLIGHT_BRIGHTNESS
|
|
|
|
/* Main LCD backlight brightness range and defaults */
|
|
/* From 0 to 32. Default is 18, that is set by the bootloader
|
|
* We stay a little lower since OF makes a distinction between
|
|
* two LCD screens (there is no reason to go further than 25 in any case)
|
|
*/
|
|
#define MIN_BRIGHTNESS_SETTING 1
|
|
#define MAX_BRIGHTNESS_SETTING 25
|
|
#define DEFAULT_BRIGHTNESS_SETTING 18
|
|
|
|
/* Which backlight fading type? */
|
|
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING
|
|
|
|
/* The number of bytes reserved for loadable codecs */
|
|
#define CODEC_SIZE 0x80000
|
|
|
|
/* The number of bytes reserved for loadable plugins */
|
|
#define PLUGIN_BUFFER_SIZE 0x100000
|
|
|
|
#define AB_REPEAT_ENABLE
|
|
|
|
/* Define this if you do software codec */
|
|
#define CONFIG_CODEC SWCODEC
|
|
|
|
/* R1 KeyPad configuration for plugins */
|
|
#define CONFIG_KEYPAD SAMSUNG_YPR1_PAD
|
|
#define BUTTON_DRIVER_CLOSE
|
|
|
|
/* We have WM1808, which so far is compatible with the following */
|
|
#define HAVE_WM8978
|
|
|
|
/* For the moment the only supported frequency is 44kHz,
|
|
* even if the codec supports more (see wmcodec-ypr1.c)
|
|
*/
|
|
#define HW_SAMPR_CAPS SAMPR_CAP_44
|
|
|
|
/* define the bitmask of recording sample rates */
|
|
#define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */
|
|
|
|
/* We have the Si4709 */
|
|
#define CONFIG_TUNER SI4700
|
|
#define HAVE_TUNER_PWR_CTRL
|
|
#define HAVE_RDS_CAP
|
|
|
|
/* Define this for FM radio input available */
|
|
#define HAVE_FMRADIO_IN
|
|
#define INPUT_SRC_CAPS SRC_CAP_FMRADIO
|
|
|
|
/* We have a GPIO pin that detects it */
|
|
#define HAVE_HEADPHONE_DETECTION
|
|
|
|
/* R1 has a standard linux RTC driver on /dev/rtc1 (->/dev/rtc)
|
|
* The RTC is S35392 A
|
|
*/
|
|
#define CONFIG_RTC APPLICATION
|
|
|
|
#define BATTERY_CAPACITY_DEFAULT 600 /* default battery capacity */
|
|
#define BATTERY_CAPACITY_MIN 600 /* min. capacity selectable */
|
|
#define BATTERY_CAPACITY_MAX 600 /* max. capacity selectable */
|
|
#define BATTERY_CAPACITY_INC 0 /* capacity increment */
|
|
#define BATTERY_TYPES_COUNT 1 /* only one type */
|
|
|
|
/* Define current usage levels. */
|
|
#define CURRENT_NORMAL 24 /* ~25h, on 600mAh that's about 24mA */
|
|
#define CURRENT_BACKLIGHT 62 /* ~6,5h -> 92mA. Minus 24mA normal that gives us 68mA */
|
|
|
|
/* R1's fuel gauge max17040 can supply both kind of values */
|
|
#define CONFIG_BATTERY_MEASURE PERCENTAGE_MEASURE
|
|
|
|
/* Hardware controls charging, we can monitor */
|
|
#define CONFIG_CHARGING CHARGING_MONITOR
|
|
|
|
#define CONFIG_LCD LCD_SAMSUNGYPR1
|
|
|
|
/* Define this if you have a software controlled poweroff */
|
|
#define HAVE_SW_POWEROFF
|
|
|
|
/* define this if the target has volume keys which can be used in the lists */
|
|
#define HAVE_VOLUME_IN_LIST
|
|
|
|
/* This mount point resides in the rootfs, binded to /mnt/media0/.rockbox */
|
|
#define BOOTDIR "/.rockbox"
|
|
|
|
/* No special storage */
|
|
#define CONFIG_STORAGE STORAGE_HOSTFS
|
|
#define HAVE_STORAGE_FLUSH
|