| .. |
|
common
|
Correct usage of ICODE_ATTR in memcpy.c and strlen.c
|
2005-08-15 05:33:10 +00:00 |
|
drivers
|
Replace SWAB16 and SWAB32 with a comprehensive set of byte-swap macros - letoh16, letoh32, htole16, htole32, betoh16, betoh32, htobe16 and htobe32
|
2005-10-06 19:27:43 +00:00 |
|
export
|
Replace SWAB16 and SWAB32 with a comprehensive set of byte-swap macros - letoh16, letoh32, htole16, htole32, betoh16, betoh32, htobe16 and htobe32
|
2005-10-06 19:27:43 +00:00 |
|
include
|
Cast to unsigned isn't enough in the isXXXX macros (chars > 127 caused a negative array index). With a cast to unsigned char, the macros work as expected. The other macros were changed accordingly.
|
2005-08-11 19:32:39 +00:00 |
|
test
|
64 sectors are 64 sectors...
|
2005-04-18 18:48:13 +00:00 |
|
app.lds
|
Iriver: Changed the IRAM splitting between core and plugins to 48KB/48KB, and reduced the main thread stack to 8KB, same size as on archos.
|
2005-09-01 20:57:33 +00:00 |
|
backlight.c
|
Coldfire: New timer handling on CPU frequency change, adjusting the prescaler on the fly, for both tick and user timer. Precondition is that the higher frequencies are integer multiples of the base: now NORMAL is 45 MHz and MAX is 124 MHz. Removes the need for applications with longer timer periods (>= 10 ms) to boost the CPU all the time, e.g. the grayscale lib. Timer counts are now always based on the base frequency (CPU_FREQ). * Adjusted the RAM refresh timers to the new frequencies (all frequencies for H100) * All: Fixed the tick timer count being off by one.
|
2005-10-03 09:24:36 +00:00 |
|
bidi.c
|
Patch #783877 by Gadi Cohen updated by Naftali Goldstein - Bidirectional text support for Hebrew and Arabic
|
2005-08-08 19:23:28 +00:00 |
|
bitswap.S
|
Added header file for bitswap, and made the fliptable global for re-use
|
2004-09-26 09:25:59 +00:00 |
|
boot.lds
|
Added CPU_COLDFIRE define - one step closer to iAudio-port
|
2005-07-18 12:40:29 +00:00 |
|
buffer.c
|
mp3buf renamed to audiobuf
|
2005-04-05 11:33:58 +00:00 |
|
COPYING
|
iRiver scramble and descramble code from Dave Cooper
|
2005-01-24 09:01:48 +00:00 |
|
crt0.S
|
Archos: Trap UserBrk in the gdb debugger
|
2005-08-30 20:50:47 +00:00 |
|
debug.c
|
Enlarged the buffer for DEBUGF()
|
2005-08-16 08:32:43 +00:00 |
|
descramble.S
|
patch #910193 by Jens Arnold: smaller and faster descramble/RoLo
|
2004-03-11 17:07:08 +00:00 |
|
FILES
|
Removed outdated win32.mak
|
2005-06-30 11:15:51 +00:00 |
|
font.c
|
moved lcd_getstringsize into font.c
|
2005-04-19 12:47:16 +00:00 |
|
hwcompat.c
|
hw compat stub for the gmini series
|
2005-02-04 16:15:19 +00:00 |
|
id3.c
|
Add ALAC audio type
|
2005-09-22 21:56:03 +00:00 |
|
kernel.c
|
Coldfire: New timer handling on CPU frequency change, adjusting the prescaler on the fly, for both tick and user timer. Precondition is that the higher frequencies are integer multiples of the base: now NORMAL is 45 MHz and MAX is 124 MHz. Removes the need for applications with longer timer periods (>= 10 ms) to boost the CPU all the time, e.g. the grayscale lib. Timer counts are now always based on the base frequency (CPU_FREQ). * Adjusted the RAM refresh timers to the new frequencies (all frequencies for H100) * All: Fixed the tick timer count being off by one.
|
2005-10-03 09:24:36 +00:00 |
|
logf.c
|
better logf
|
2005-06-30 15:14:33 +00:00 |
|
Makefile
|
For targets without an RTC, use the rockbox build date as the start date in the FAT driver. No more 2003-08-01 files.
|
2005-09-06 18:03:50 +00:00 |
|
mp3_playback.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
|
mp3data.c
|
Rather obvious simplification of the mpeg frametime fraction calculation.
|
2005-09-25 19:07:56 +00:00 |
|
mpeg.c
|
Archos recording/playback: (1) Xing header creation: * Now estimates the framecount from the recording time if the MAS frame counter saturates, so it always writes a valid Xing header. * Reverted my brainless short-xing-header change. This was only valid for layer 3. (2) Xing/VBRI header evaluation: Fixed possible overflow in bitrate calculation. (3) MPEG thread: Avoid double chunk size limiting for the rare case of 8 MB modded Ondios.
|
2005-09-15 05:29:26 +00:00 |
|
panic.c
|
Fixed compiler error in the X11 iriver simulator
|
2005-09-12 11:02:57 +00:00 |
|
pcm_playback.c
|
Major peakmeter rework: * Changed set/get functions for dbfs mode to bool type. * Removed performance setting, leaving (slightly adapted) high performance mode only. * Refresh rate is always 20 Hz now. * Readout doesn't do an extra (hidden) peek, should allow for slightly better clip detection. * Brought back high performance peakmeter for recording. Peakmeter stops hogging the CPU when the disk is spinning; this is enough to avoid the performance problem when saving data. * Optimisations, code cleanup and code policeing. * (iriver) Reduced CPU load of peakmeter by not calculating excessive overlaps. ** Bumped config block version, so save your settings before upgrading.
|
2005-08-29 20:07:17 +00:00 |
|
pcm_record.c
|
Replace SWAB16 and SWAB32 with a comprehensive set of byte-swap macros - letoh16, letoh32, htole16, htole32, betoh16, betoh32, htobe16 and htobe32
|
2005-10-06 19:27:43 +00:00 |
|
powermgmt.c
|
The power thread now monitors the shutdown process and forces a poweroff if it takes more than 8 seconds.
|
2005-09-14 09:08:26 +00:00 |
|
README
|
|
|
|
replaygain.c
|
iRiver: remove some code that isn't needed any more.
|
2005-10-03 18:35:02 +00:00 |
|
rolo.c
|
Fixed RoLo for H100 targets
|
2005-07-18 15:50:06 +00:00 |
|
rom.lds
|
allow the flash plugin to verify the RomBox link address
|
2005-08-23 07:26:40 +00:00 |
|
sound.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
|
SOURCES
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
|
system.c
|
Coldfire: New timer handling on CPU frequency change, adjusting the prescaler on the fly, for both tick and user timer. Precondition is that the higher frequencies are integer multiples of the base: now NORMAL is 45 MHz and MAX is 124 MHz. Removes the need for applications with longer timer periods (>= 10 ms) to boost the CPU all the time, e.g. the grayscale lib. Timer counts are now always based on the base frequency (CPU_FREQ). * Adjusted the RAM refresh timers to the new frequencies (all frequencies for H100) * All: Fixed the tick timer count being off by one.
|
2005-10-03 09:24:36 +00:00 |
|
thread.c
|
Coldfire: Made the MACSR register part of the thread context to allow easier handling in the codecs.
|
2005-09-01 20:06:38 +00:00 |
|
timer.c
|
Coldfire: New timer handling on CPU frequency change, adjusting the prescaler on the fly, for both tick and user timer. Precondition is that the higher frequencies are integer multiples of the base: now NORMAL is 45 MHz and MAX is 124 MHz. Removes the need for applications with longer timer periods (>= 10 ms) to boost the CPU all the time, e.g. the grayscale lib. Timer counts are now always based on the base frequency (CPU_FREQ). * Adjusted the RAM refresh timers to the new frequencies (all frequencies for H100) * All: Fixed the tick timer count being off by one.
|
2005-10-03 09:24:36 +00:00 |
|
tuner_philips.c
|
H1x0: More precise tuning; corrected xtal frequency in comments + #defines.
|
2005-09-24 09:06:31 +00:00 |
|
tuner_samsung.c
|
Renamed CONFIG_HWCODEC and MASNONE to the more appropriate CONFIG_CODEC and SWCODEC, respectively.
|
2005-08-29 21:15:27 +00:00 |
|
usb.c
|
Trying to enter STANDBY mode when entering USB mode seems to cause more trouble than it is worth.
|
2005-08-22 13:27:56 +00:00 |
9e19c95d8e