| .. |
|
archos/av300
|
|
|
|
as3525
|
Few Fuze/e200v2 button fixes. Don't read the scrollwheel when the hold button is active and rename a variable to describe better what it is for.
|
2009-04-13 17:10:52 +00:00 |
|
at91sam
|
Initial commit for the "Lyre prototype 1" port by Jorge Pinto from FS#10045.
|
2009-03-30 12:20:47 +00:00 |
|
imx31
|
imx31: Oops. Fix a misplaced comma in wmcodec-imx31.c. Add a couple parentheses in statment (just to be clearer). Should take care of things for now :).
|
2009-03-22 02:27:20 +00:00 |
|
ipod
|
Code police: fix brace placement, remove trailing spaces
|
2009-04-13 18:35:11 +00:00 |
|
iriver
|
Fix very last yellows.
|
2009-03-17 04:46:11 +00:00 |
|
olympus
|
Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware').
|
2009-02-20 02:33:40 +00:00 |
|
philips
|
Philips SA9200 fixes: (1) boost in the bootloader like the e200 and c200, (2) use the right GPIOs and inits in the SD driver, and (3) add charger detection.
|
2009-03-14 02:47:14 +00:00 |
|
pnx0101
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
s3c2440
|
Okay, this should be the last. I'm sorry for the trouble, but now everything *should* be properly #ifdef'd (which wasn't before) :/
|
2009-03-17 04:22:28 +00:00 |
|
s5l8700
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
sandisk
|
Remove that orphaned and wrong #if
|
2009-03-30 13:08:59 +00:00 |
|
tatung/tpj1022
|
Move the PP5020 ADC defines to the c-file instead of repeating them across the header files. Also, the Tatung TPJ1022 should use the common PP5020 ADC driver.
|
2009-01-27 03:19:57 +00:00 |
|
tcc77x
|
Rework lcd_enabled and lcd_set/call_enable hook
|
2009-03-17 02:43:47 +00:00 |
|
tcc780x
|
TCC78x: Implement the user timer, rework some of the timer register #defines, and use udelay() instead of the hacky sleep_ms() in the D2 LCD driver. Doom works now.
|
2009-03-30 21:15:15 +00:00 |
|
tms320dm320
|
M:Robe 500: Move all remote specific code into a common file for reuse on other players (M:Robe 100). Include minor fixes.
|
2009-04-18 06:38:55 +00:00 |
|
adc-as3514.c
|
|
|
|
adc-pp5020.c
|
Make the Philips HDD1630 ADC work: it needs a slightly different init sequence. Also, it only needs 2 channels enabled.
|
2009-01-27 03:36:30 +00:00 |
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
|
|
|
ata-as-arm.S
|
|
|
|
ata-nand-telechips.c
|
TCC NAND: The BLOCKS_PER_SEGMENT define was actually the number of planes mentioned in the Samsung NAND datasheet. Add this to the nand_id struct, so that it can be runtime detected (required for some D2s to boot). Use the struct directly instead of making a local copy, and format the nand_info table to 80 columns.
|
2009-03-02 23:36:12 +00:00 |
|
ata-pp5002.c
|
|
|
|
ata-pp5020.c
|
|
|
|
ata-sd-pp.c
|
Philips SA9200 fixes: (1) boost in the bootloader like the e200 and c200, (2) use the right GPIOs and inits in the SD driver, and (3) add charger detection.
|
2009-03-14 02:47:14 +00:00 |
|
ata-sd-target.h
|
|
|
|
ata-target.h
|
|
|
|
audio-pp.c
|
|
|
|
crt0-pp-bl.S
|
Dual boot for the Philips HDD1630.
|
2009-01-10 03:21:07 +00:00 |
|
crt0-pp.S
|
Reclaim .iram areas in DRAM by overlapping their load addresses with the uninitialized data sections. I did what I could test out-- not any flash image linker scripts or other target processors. Move any .iram copies in crt0.S's to be the first operation even if not _strictly_ necessary to be emphatic (aka. 'beware').
|
2009-02-20 02:33:40 +00:00 |
|
crt0.S
|
|
|
|
ffs-arm.S
|
|
|
|
i2c-pp.c
|
FM radio for Philips HDD1630. Volume was very faint unless recording was enabled, so do that too.
|
2009-02-13 03:49:17 +00:00 |
|
i2c-telechips.c
|
|
|
|
i2s-pp.c
|
Use DMA for audio playback on PP502x (FS#9910 + some further mods). I can't say at this point about any change in battery life but it frees up a percent or two of CPU cycles as measured in the buffering screen. No change in recording transfers yet. Testing seemed to check out so put it out for general use and see what happens.
|
2009-02-19 20:40:03 +00:00 |
|
kernel-pp.c
|
Correct Björn's name in various file headers.
|
2009-03-23 17:08:46 +00:00 |
|
lcd-as-memframe.S
|
|
|
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
|
|
|
memmove-arm.S
|
|
|
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
Fix header multiple inclusion guard typo.
|
2009-02-12 00:09:12 +00:00 |
|
mmu-arm.S
|
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly.
|
2009-02-11 23:56:00 +00:00 |
|
pcm-pp.c
|
Fix FS#9949 - Song not playing, noise instead. Stale code was left from before transferring in segments and one calculation was just wrong for limiting trasfer size. Make buffer aligning consistent, change <= 0 on size_t variable to == 0 and remove pointless limit on overall buffer size.
|
2009-03-07 05:21:58 +00:00 |
|
pcm-telechips.c
|
|
|
|
powermgmt-ascodec.c
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
system-arm.c
|
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
|
2009-01-08 10:15:32 +00:00 |
|
system-arm.h
|
ARMv6: Optimize interrupt enable/disable with cpsie and cpsid. Section off system-arm.h by ARM_ARCH rather than checking within each implementation.
|
2009-02-02 03:51:50 +00:00 |
|
system-pp502x.c
|
Fixes and improvements for FS#9890 - iPod 5G: LCD sleep, BCM shutdown and bootstrap
|
2009-04-12 14:54:12 +00:00 |
|
system-pp5002.c
|
Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
|
2009-02-11 12:55:51 +00:00 |
|
system-target.h
|
Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
|
2009-02-11 12:55:51 +00:00 |
|
usb-drv-arc.c
|
Properly cast things to avoid shiny yellow
|
2009-03-29 20:08:10 +00:00 |
|
usb-fw-pp502x.c
|
Make USB on sansas more reliable (FS#10026). Both fixes by Toni Hellmann
|
2009-03-17 20:24:55 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-target.h
|
Use bus reset detection for all ARC OTG devices. Remove conflict from LV24020LP driver with some GPIO-by-number macros for PP502x. Start monitoring for USB stack once all core threads and queues are created otherwise queues will likely be registered after USB acks. Putting PP502x system_reboot in IRAM (unmapped, uncached) memory seems to help it work more consistently. Hopefully I got all the PP USB connect handlers in the right spot in irq_handler. If device seems unresponsive to cable, check there first.
|
2009-01-22 22:05:04 +00:00 |
|
usb-tcc.c
|
Implement udelay() for D2 and remove the old hacks from USB & FM drivers.
|
2009-03-20 23:14:05 +00:00 |
|
wmcodec-pp.c
|
|
|
|
wmcodec-telechips.c
|
|
|
9340af5b25