7df759c951
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21546 a1c6a512-1295-4272-9138-f99709370657
76 lines
2.1 KiB
C
76 lines
2.1 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2009 by Bertrik Sikken
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
#include "config.h"
|
|
#include "kernel.h"
|
|
#include "i2c-coldfire.h"
|
|
#include "pcf50606.h"
|
|
#include "uda1380.h"
|
|
#include "udacodec.h"
|
|
|
|
void udacodec_reset(void)
|
|
{
|
|
#ifdef IRIVER_H300_SERIES
|
|
int mask = disable_irq_save();
|
|
pcf50606_write(0x3b, 0x00); /* GPOOD2 high Z */
|
|
pcf50606_write(0x3b, 0x07); /* GPOOD2 low */
|
|
restore_irq(mask);
|
|
#else
|
|
/* RESET signal */
|
|
or_l(1<<29, &GPIO_OUT);
|
|
or_l(1<<29, &GPIO_ENABLE);
|
|
or_l(1<<29, &GPIO_FUNCTION);
|
|
sleep(HZ/100);
|
|
and_l(~(1<<29), &GPIO_OUT);
|
|
#endif
|
|
}
|
|
|
|
int udacodec_write(unsigned char reg, unsigned short value)
|
|
{
|
|
unsigned char data[3];
|
|
|
|
data[0] = reg;
|
|
data[1] = value >> 8;
|
|
data[2] = value & 0xff;
|
|
|
|
if (i2c_write(I2C_IFACE_0, UDA1380_ADDR, data, 3) != 3) {
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int udacodec_write2(unsigned char reg,
|
|
unsigned short value1, unsigned short value2)
|
|
{
|
|
unsigned char data[5];
|
|
|
|
data[0] = reg;
|
|
data[1] = value1 >> 8;
|
|
data[2] = value1 & 0xFF;
|
|
data[3] = value2 >> 8;
|
|
data[4] = value2 & 0xFF;
|
|
|
|
if (i2c_write(I2C_IFACE_0, UDA1380_ADDR, data, 5) != 5) {
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|