Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export/mx31.h

372 lines
20 KiB
C
Raw Blame History

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id: $
*
* Copyright (C) 2007 by Barry Wardell
*
* i.MX31 driver based on code from the Linux Target Image Builder from
* Freescale - http://www.bitshrine.org/ and
* http://www.bitshrine.org/gpp/linux-2.6.16-mx31-usb-2.patch
* Adapted for Rockbox in January 2007
* Original file: drivers/usb/gadget/arcotg_udc.h
*
* Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
*
* Based on mpc-udc.h
* Author: Li Yang (leoli@freescale.com)
* Jiang Bo (Tanya.jiang@freescale.com)
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/*
* Freescale USB device/endpoint management registers
*/
#ifndef __MX31_H
#define __MX31_H
/* Register addresses - from Freescale i.MX31 reference manual */
/* The PortalPlayer USB controller usec base address 0xc5000000 */
#define USB_BASE 0xc5000000
/* OTG */
#define UOG_ID (*(volatile unsigned int *)(USB_BASE+0x000))
#define UOG_HWGENERAL (*(volatile unsigned int *)(USB_BASE+0x004))
#define UOG_HWHOST (*(volatile unsigned int *)(USB_BASE+0x008))
#define UOG_HWTXBUF (*(volatile unsigned int *)(USB_BASE+0x010))
#define UOG_HWRXBUF (*(volatile unsigned int *)(USB_BASE+0x014))
#define UOG_CAPLENGTH (*(volatile unsigned char *)(USB_BASE+0x100))
#define UOG_HCIVERSION (*(volatile unsigned short *)(USB_BASE+0x102))
#define UOG_HCSPARAMS (*(volatile unsigned int *)(USB_BASE+0x104))
#define UOG_HCCPARAMS (*(volatile unsigned int *)(USB_BASE+0x108))
#define UOG_DCIVERSION (*(volatile unsigned short *)(USB_BASE+0x120))
#define UOG_DCCPARAMS (*(volatile unsigned int *)(USB_BASE+0x124))
#define UOG_USBCMD (*(volatile unsigned int *)(USB_BASE+0x140))
#define UOG_USBSTS (*(volatile unsigned int *)(USB_BASE+0x144))
#define UOG_USBINTR (*(volatile unsigned int *)(USB_BASE+0x148))
#define UOG_FRINDEX (*(volatile unsigned int *)(USB_BASE+0x14c))
#define UOG_PERIODICLISTBASE (*(volatile unsigned int *)(USB_BASE+0x154))
#define UOG_ASYNCLISTADDR (*(volatile unsigned int *)(USB_BASE+0x158))
#define UOG_BURSTSIZE (*(volatile unsigned int *)(USB_BASE+0x160))
#define UOG_TXFILLTUNING (*(volatile unsigned int *)(USB_BASE+0x164))
#define UOG_ULPIVIEW (*(volatile unsigned int *)(USB_BASE+0x170))
#define UOG_CFGFLAG (*(volatile unsigned int *)(USB_BASE+0x180))
#define UOG_PORTSC1 (*(volatile unsigned int *)(USB_BASE+0x184))
/*#define UOG_PORTSC2 (*(volatile unsigned int *)(USB_BASE+0x188))
#define UOG_PORTSC3 (*(volatile unsigned int *)(USB_BASE+0x18c))
#define UOG_PORTSC4 (*(volatile unsigned int *)(USB_BASE+0x190))
#define UOG_PORTSC5 (*(volatile unsigned int *)(USB_BASE+0x194))
#define UOG_PORTSC6 (*(volatile unsigned int *)(USB_BASE+0x198))
#define UOG_PORTSC7 (*(volatile unsigned int *)(USB_BASE+0x19c))
#define UOG_PORTSC8 (*(volatile unsigned int *)(USB_BASE+0x1a0))*/
#define UOG_OTGSC (*(volatile unsigned int *)(USB_BASE+0x1a4))
#define UOG_USBMODE (*(volatile unsigned int *)(USB_BASE+0x1a8))
#define UOG_ENDPTSETUPSTAT (*(volatile unsigned int *)(USB_BASE+0x1ac))
#define UOG_ENDPTPRIME (*(volatile unsigned int *)(USB_BASE+0x1b0))
#define UOG_ENDPTFLUSH (*(volatile unsigned int *)(USB_BASE+0x1b4))
#define UOG_ENDPTSTAT (*(volatile unsigned int *)(USB_BASE+0x1b8))
#define UOG_ENDPTCOMPLETE (*(volatile unsigned int *)(USB_BASE+0x1bc))
#define ENDPTCRTL0 (*(volatile unsigned int *)(USB_BASE+0x1c0))
#define ENDPTCRTL1 (*(volatile unsigned int *)(USB_BASE+0x1c4))
#define ENDPTCRTL2 (*(volatile unsigned int *)(USB_BASE+0x1c8))
#define ENDPTCRTL3 (*(volatile unsigned int *)(USB_BASE+0x1cc))
#define ENDPTCRTL4 (*(volatile unsigned int *)(USB_BASE+0x1d0))
#define ENDPTCRTL5 (*(volatile unsigned int *)(USB_BASE+0x1d4))
#define ENDPTCRTL6 (*(volatile unsigned int *)(USB_BASE+0x1d8))
#define ENDPTCRTL7 (*(volatile unsigned int *)(USB_BASE+0x1dc))
/*#define ENDPTCRTL8 (*(volatile unsigned int *)(USB_BASE+0x1e0))
#define ENDPTCRTL9 (*(volatile unsigned int *)(USB_BASE+0x1e4))
#define ENDPTCRTL10 (*(volatile unsigned int *)(USB_BASE+0x1e8))
#define ENDPTCRTL11 (*(volatile unsigned int *)(USB_BASE+0x1ec))
#define ENDPTCRTL12 (*(volatile unsigned int *)(USB_BASE+0x1f0))
#define ENDPTCRTL13 (*(volatile unsigned int *)(USB_BASE+0x1f4))
#define ENDPTCRTL14 (*(volatile unsigned int *)(USB_BASE+0x1f8))
#define ENDPTCRTL15 (*(volatile unsigned int *)(USB_BASE+0x1fc))*/
/* Host 1 */
#define UH1_ID (*(volatile unsigned int *)(USB_BASE+0x200))
#define UH1_HWGENERAL (*(volatile unsigned int *)(USB_BASE+0x204))
#define UH1_HWHOST (*(volatile unsigned int *)(USB_BASE+0x208))
#define UH1_HWTXBUF (*(volatile unsigned int *)(USB_BASE+0x210))
#define UH1_HWRXBUF (*(volatile unsigned int *)(USB_BASE+0x214))
#define UH1_CAPLENGTH (*(volatile unsigned int *)(USB_BASE+0x300))
#define UH1_HCIVERSION (*(volatile unsigned int *)(USB_BASE+0x302))
#define UH1_HCSPARAMS (*(volatile unsigned int *)(USB_BASE+0x304))
#define UH1_HCCPARAMS (*(volatile unsigned int *)(USB_BASE+0x308))
#define UH1_USBCMD (*(volatile unsigned int *)(USB_BASE+0x340))
#define UH1_USBSTS (*(volatile unsigned int *)(USB_BASE+0x344))
#define UH1_USBINTR (*(volatile unsigned int *)(USB_BASE+0x348))
#define UH1_FRINDEX (*(volatile unsigned int *)(USB_BASE+0x34c))
#define UH1_PERIODICLISTBASE (*(volatile unsigned int *)(USB_BASE+0x354))
#define UH1_ASYNCLISTADDR (*(volatile unsigned int *)(USB_BASE+0x358))
#define UH1_BURSTSIZE (*(volatile unsigned int *)(USB_BASE+0x360))
#define UH1_TXFILLTUNING (*(volatile unsigned int *)(USB_BASE+0x364))
#define UH1_PORTSC1 (*(volatile unsigned int *)(USB_BASE+0x384))
#define UH1_USBMODE (*(volatile unsigned int *)(USB_BASE+0x3a8))
/* Host 2 */
#define UH2_ID (*(volatile unsigned int *)(USB_BASE+0x400))
#define UH2_HWGENERAL (*(volatile unsigned int *)(USB_BASE+0x404))
#define UH2_HWHOST (*(volatile unsigned int *)(USB_BASE+0x408))
#define UH2_HWTXBUF (*(volatile unsigned int *)(USB_BASE+0x410))
#define UH2_HWRXBUF (*(volatile unsigned int *)(USB_BASE+0x414))
#define UH2_CAPLENGTH (*(volatile unsigned int *)(USB_BASE+0x500))
#define UH2_HCIVERSION (*(volatile unsigned int *)(USB_BASE+0x502))
#define UH2_HCSPARAMS (*(volatile unsigned int *)(USB_BASE+0x504))
#define UH2_HCCPARAMS (*(volatile unsigned int *)(USB_BASE+0x508))
#define UH2_USBCMD (*(volatile unsigned int *)(USB_BASE+0x540))
#define UH2_USBSTS (*(volatile unsigned int *)(USB_BASE+0x544))
#define UH2_USBINTR (*(volatile unsigned int *)(USB_BASE+0x548))
#define UH2_FRINDEX (*(volatile unsigned int *)(USB_BASE+0x54c))
#define UH2_PERIODICLISTBASE (*(volatile unsigned int *)(USB_BASE+0x554))
#define UH2_ASYNCLISTADDR (*(volatile unsigned int *)(USB_BASE+0x558))
#define UH2_BURSTSIZE (*(volatile unsigned int *)(USB_BASE+0x560))
#define UH2_TXFILLTUNING (*(volatile unsigned int *)(USB_BASE+0x564))
#define UH2_ULPIVIEW (*(volatile unsigned int *)(USB_BASE+0x570))
#define UH2_PORTSC1 (*(volatile unsigned int *)(USB_BASE+0x584))
#define UH2_USBMODE (*(volatile unsigned int *)(USB_BASE+0x5a8))
/* General */
#define USB_CTRL (*(volatile unsigned int *)(USB_BASE+0x600))
#define USB_OTG_MIRROR (*(volatile unsigned int *)(USB_BASE+0x604))
/* Maximum values */
#define USB_MAX_ENDPOINTS 8
#define USB_MAX_PIPES (USB_MAX_ENDPOINTS*2)
#define USB_MAX_CTRL_PAYLOAD 64
/* ep0 transfer state */
#define WAIT_FOR_SETUP 0
#define DATA_STATE_XMIT 1
#define DATA_STATE_NEED_ZLP 2
#define WAIT_FOR_OUT_STATUS 3
#define DATA_STATE_RECV 4
/* Frame Index Register Bit Masks */
#define USB_FRINDEX_MASKS (0x3fff)
/* USB CMD Register Bit Masks */
#define USB_CMD_RUN_STOP (0x00000001)
#define USB_CMD_CTRL_RESET (0x00000002)
#define USB_CMD_PERIODIC_SCHEDULE_EN (0x00000010)
#define USB_CMD_ASYNC_SCHEDULE_EN (0x00000020)
#define USB_CMD_INT_AA_DOORBELL (0x00000040)
#define USB_CMD_ASP (0x00000300)
#define USB_CMD_ASYNC_SCH_PARK_EN (0x00000800)
#define USB_CMD_SUTW (0x00002000)
#define USB_CMD_ATDTW (0x00004000)
#define USB_CMD_ITC (0x00FF0000)
/* bit 15,3,2 are frame list size */
#define USB_CMD_FRAME_SIZE_1024 (0x00000000)
#define USB_CMD_FRAME_SIZE_512 (0x00000004)
#define USB_CMD_FRAME_SIZE_256 (0x00000008)
#define USB_CMD_FRAME_SIZE_128 (0x0000000C)
#define USB_CMD_FRAME_SIZE_64 (0x00008000)
#define USB_CMD_FRAME_SIZE_32 (0x00008004)
#define USB_CMD_FRAME_SIZE_16 (0x00008008)
#define USB_CMD_FRAME_SIZE_8 (0x0000800C)
/* bit 9-8 are async schedule park mode count */
#define USB_CMD_ASP_00 (0x00000000)
#define USB_CMD_ASP_01 (0x00000100)
#define USB_CMD_ASP_10 (0x00000200)
#define USB_CMD_ASP_11 (0x00000300)
#define USB_CMD_ASP_BIT_POS (8)
/* bit 23-16 are interrupt threshold control */
#define USB_CMD_ITC_NO_THRESHOLD (0x00000000)
#define USB_CMD_ITC_1_MICRO_FRM (0x00010000)
#define USB_CMD_ITC_2_MICRO_FRM (0x00020000)
#define USB_CMD_ITC_4_MICRO_FRM (0x00040000)
#define USB_CMD_ITC_8_MICRO_FRM (0x00080000)
#define USB_CMD_ITC_16_MICRO_FRM (0x00100000)
#define USB_CMD_ITC_32_MICRO_FRM (0x00200000)
#define USB_CMD_ITC_64_MICRO_FRM (0x00400000)
#define USB_CMD_ITC_BIT_POS (16)
/* USB STS Register Bit Masks */
#define USB_STS_INT (0x00000001)
#define USB_STS_ERR (0x00000002)
#define USB_STS_PORT_CHANGE (0x00000004)
#define USB_STS_FRM_LST_ROLL (0x00000008)
#define USB_STS_SYS_ERR (0x00000010)
#define USB_STS_IAA (0x00000020)
#define USB_STS_RESET (0x00000040)
#define USB_STS_SOF (0x00000080)
#define USB_STS_SUSPEND (0x00000100)
#define USB_STS_HC_HALTED (0x00001000)
#define USB_STS_RCL (0x00002000)
#define USB_STS_PERIODIC_SCHEDULE (0x00004000)
#define USB_STS_ASYNC_SCHEDULE (0x00008000)
/* USB INTR Register Bit Masks */
#define USB_INTR_INT_EN (0x00000001)
#define USB_INTR_ERR_INT_EN (0x00000002)
#define USB_INTR_PTC_DETECT_EN (0x00000004)
#define USB_INTR_FRM_LST_ROLL_EN (0x00000008)
#define USB_INTR_SYS_ERR_EN (0x00000010)
#define USB_INTR_ASYN_ADV_EN (0x00000020)
#define USB_INTR_RESET_EN (0x00000040)
#define USB_INTR_SOF_EN (0x00000080)
#define USB_INTR_DEVICE_SUSPEND (0x00000100)
/* Device Address bit masks */
#define USB_DEVICE_ADDRESS_MASK (0xFE000000)
#define USB_DEVICE_ADDRESS_BIT_POS (25)
/* endpoint list address bit masks */
#define USB_EP_LIST_ADDRESS_MASK (0xfffff800)
/* PORTSCX Register Bit Masks */
#define PORTSCX_CURRENT_CONNECT_STATUS (0x00000001)
#define PORTSCX_CONNECT_STATUS_CHANGE (0x00000002)
#define PORTSCX_PORT_ENABLE (0x00000004)
#define PORTSCX_PORT_EN_DIS_CHANGE (0x00000008)
#define PORTSCX_OVER_CURRENT_ACT (0x00000010)
#define PORTSCX_OVER_CURRENT_CHG (0x00000020)
#define PORTSCX_PORT_FORCE_RESUME (0x00000040)
#define PORTSCX_PORT_SUSPEND (0x00000080)
#define PORTSCX_PORT_RESET (0x00000100)
#define PORTSCX_LINE_STATUS_BITS (0x00000C00)
#define PORTSCX_PORT_POWER (0x00001000)
#define PORTSCX_PORT_INDICTOR_CTRL (0x0000C000)
#define PORTSCX_PORT_TEST_CTRL (0x000F0000)
#define PORTSCX_WAKE_ON_CONNECT_EN (0x00100000)
#define PORTSCX_WAKE_ON_CONNECT_DIS (0x00200000)
#define PORTSCX_WAKE_ON_OVER_CURRENT (0x00400000)
#define PORTSCX_PHY_LOW_POWER_SPD (0x00800000)
#define PORTSCX_PORT_FORCE_FULL_SPEED (0x01000000)
#define PORTSCX_PORT_SPEED_MASK (0x0C000000)
#define PORTSCX_PORT_WIDTH (0x10000000)
#define PORTSCX_PHY_TYPE_SEL (0xC0000000)
/* bit 11-10 are line status */
#define PORTSCX_LINE_STATUS_SE0 (0x00000000)
#define PORTSCX_LINE_STATUS_JSTATE (0x00000400)
#define PORTSCX_LINE_STATUS_KSTATE (0x00000800)
#define PORTSCX_LINE_STATUS_UNDEF (0x00000C00)
#define PORTSCX_LINE_STATUS_BIT_POS (10)
/* bit 15-14 are port indicator control */
#define PORTSCX_PIC_OFF (0x00000000)
#define PORTSCX_PIC_AMBER (0x00004000)
#define PORTSCX_PIC_GREEN (0x00008000)
#define PORTSCX_PIC_UNDEF (0x0000C000)
#define PORTSCX_PIC_BIT_POS (14)
/* bit 19-16 are port test control */
#define PORTSCX_PTC_DISABLE (0x00000000)
#define PORTSCX_PTC_JSTATE (0x00010000)
#define PORTSCX_PTC_KSTATE (0x00020000)
#define PORTSCX_PTC_SEQNAK (0x00030000)
#define PORTSCX_PTC_PACKET (0x00040000)
#define PORTSCX_PTC_FORCE_EN (0x00050000)
#define PORTSCX_PTC_BIT_POS (16)
/* bit 27-26 are port speed */
#define PORTSCX_PORT_SPEED_FULL (0x00000000)
#define PORTSCX_PORT_SPEED_LOW (0x04000000)
#define PORTSCX_PORT_SPEED_HIGH (0x08000000)
#define PORTSCX_PORT_SPEED_UNDEF (0x0C000000)
#define PORTSCX_SPEED_BIT_POS (26)
/* bit 28 is parallel transceiver width for UTMI interface */
#define PORTSCX_PTW (0x10000000)
#define PORTSCX_PTW_8BIT (0x00000000)
#define PORTSCX_PTW_16BIT (0x10000000)
/* bit 31-30 are port transceiver select */
#define PORTSCX_PTS_UTMI (0x00000000)
#define PORTSCX_PTS_ULPI (0x80000000)
#define PORTSCX_PTS_FSLS (0xC0000000)
#define PORTSCX_PTS_BIT_POS (30)
/* USB MODE Register Bit Masks */
#define USB_MODE_CTRL_MODE_IDLE (0x00000000)
#define USB_MODE_CTRL_MODE_DEVICE (0x00000002)
#define USB_MODE_CTRL_MODE_HOST (0x00000003)
#define USB_MODE_CTRL_MODE_RSV (0x00000001)
#define USB_MODE_SETUP_LOCK_OFF (0x00000008)
#define USB_MODE_STREAM_DISABLE (0x00000010)
/* Endpoint Flush Register */
#define EPFLUSH_TX_OFFSET (0x00010000)
#define EPFLUSH_RX_OFFSET (0x00000000)
/* Endpoint Setup Status bit masks */
#define EP_SETUP_STATUS_MASK (0x0000003F)
#define EP_SETUP_STATUS_EP0 (0x00000001)
/* ENDPOINTCTRLx Register Bit Masks */
#define EPCTRL_TX_ENABLE (0x00800000)
#define EPCTRL_TX_DATA_TOGGLE_RST (0x00400000) /* Not EP0 */
#define EPCTRL_TX_DATA_TOGGLE_INH (0x00200000) /* Not EP0 */
#define EPCTRL_TX_TYPE (0x000C0000)
#define EPCTRL_TX_DATA_SOURCE (0x00020000) /* Not EP0 */
#define EPCTRL_TX_EP_STALL (0x00010000)
#define EPCTRL_RX_ENABLE (0x00000080)
#define EPCTRL_RX_DATA_TOGGLE_RST (0x00000040) /* Not EP0 */
#define EPCTRL_RX_DATA_TOGGLE_INH (0x00000020) /* Not EP0 */
#define EPCTRL_RX_TYPE (0x0000000C)
#define EPCTRL_RX_DATA_SINK (0x00000002) /* Not EP0 */
#define EPCTRL_RX_EP_STALL (0x00000001)
/* bit 19-18 and 3-2 are endpoint type */
#define EPCTRL_EP_TYPE_CONTROL (0)
#define EPCTRL_EP_TYPE_ISO (1)
#define EPCTRL_EP_TYPE_BULK (2)
#define EPCTRL_EP_TYPE_INTERRUPT (3)
#define EPCTRL_TX_EP_TYPE_SHIFT (18)
#define EPCTRL_RX_EP_TYPE_SHIFT (2)
/* SNOOPn Register Bit Masks */
#define SNOOP_ADDRESS_MASK (0xFFFFF000)
#define SNOOP_SIZE_ZERO (0x00) /* snooping disable */
#define SNOOP_SIZE_4KB (0x0B) /* 4KB snoop size */
#define SNOOP_SIZE_8KB (0x0C)
#define SNOOP_SIZE_16KB (0x0D)
#define SNOOP_SIZE_32KB (0x0E)
#define SNOOP_SIZE_64KB (0x0F)
#define SNOOP_SIZE_128KB (0x10)
#define SNOOP_SIZE_256KB (0x11)
#define SNOOP_SIZE_512KB (0x12)
#define SNOOP_SIZE_1MB (0x13)
#define SNOOP_SIZE_2MB (0x14)
#define SNOOP_SIZE_4MB (0x15)
#define SNOOP_SIZE_8MB (0x16)
#define SNOOP_SIZE_16MB (0x17)
#define SNOOP_SIZE_32MB (0x18)
#define SNOOP_SIZE_64MB (0x19)
#define SNOOP_SIZE_128MB (0x1A)
#define SNOOP_SIZE_256MB (0x1B)
#define SNOOP_SIZE_512MB (0x1C)
#define SNOOP_SIZE_1GB (0x1D)
#define SNOOP_SIZE_2GB (0x1E) /* 2GB snoop size */
/* pri_ctrl Register Bit Masks */
#define PRI_CTRL_PRI_LVL1 (0x0000000C)
#define PRI_CTRL_PRI_LVL0 (0x00000003)
/* si_ctrl Register Bit Masks */
#define SI_CTRL_ERR_DISABLE (0x00000010)
#define SI_CTRL_IDRC_DISABLE (0x00000008)
#define SI_CTRL_RD_SAFE_EN (0x00000004)
#define SI_CTRL_RD_PREFETCH_DISABLE (0x00000002)
#define SI_CTRL_RD_PREFEFETCH_VAL (0x00000001)
/* control Register Bit Masks */
#define USB_CTRL_IOENB (0x00000004)
#define USB_CTRL_ULPI_INT0EN (0x00000001)
#endif /* __MX31_H */
Reference in a new issue View git blame Copy permalink