95726a5c23
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18886 a1c6a512-1295-4272-9138-f99709370657
132 lines
4.3 KiB
C
132 lines
4.3 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id: $
|
|
*
|
|
* Copyright (C) 2008 by Bertrik Sikken
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
|
|
/*
|
|
Provides access to the codec/charger/rtc/adc part of the as3525.
|
|
This part is on address 0x46 of the internal i2c bus in the as3525.
|
|
Registers in the codec part seem to be nearly identical to the registers
|
|
in the AS3514 (used in the "v1" versions of the sansa c200 and e200).
|
|
|
|
I2C register description:
|
|
* I2C2_CNTRL needs to be set to 0x51 for transfers to work at all.
|
|
bit 1 indicates direction of transfer (0 = write, 1 = read)
|
|
* I2C2_SR (status register) indicates in bit 0 if a transfer is busy.
|
|
* I2C2_SLAD0 contains the i2c slave address to read from / write to.
|
|
* I2C2_CPSR0/1 is the divider from the peripheral clock to the i2c clock.
|
|
* I2C2_DACNT sets the number of bytes to transfer and actually starts it.
|
|
|
|
When a transfer is attempted to a non-existing i2c slave address,
|
|
interrupt bit 7 is raised and DACNT is not decremented after the transfer.
|
|
*/
|
|
|
|
#include "as3525-codec.h"
|
|
#include "as3525.h"
|
|
|
|
#define AUDIO_I2C_ADDR 0x46
|
|
|
|
#define I2C2_DATA *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x00))
|
|
#define I2C2_SLAD0 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x04))
|
|
#define I2C2_CNTRL *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x0C))
|
|
#define I2C2_DACNT *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x10))
|
|
#define I2C2_CPSR0 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x1C))
|
|
#define I2C2_CPSR1 *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x20))
|
|
#define I2C2_IMR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x24))
|
|
#define I2C2_RIS *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x28))
|
|
#define I2C2_MIS *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x2C))
|
|
#define I2C2_SR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x30))
|
|
#define I2C2_INT_CLR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x40))
|
|
#define I2C2_SADDR *((volatile unsigned int *)(I2C_AUDIO_BASE + 0x44))
|
|
|
|
|
|
/* initialises the internal i2c bus and prepares for transfers to the codec */
|
|
void as3525_codec_init(void)
|
|
{
|
|
/* reset device */
|
|
CCU_SRC = CCU_SRC_I2C_AUDIO_EN;
|
|
CCU_SRL = CCU_SRL_MAGIC_NUMBER;
|
|
CCU_SRL = 0;
|
|
|
|
/* enable clock */
|
|
CGU_PERI |= CGU_I2C_AUDIO_MASTER_CLOCK_ENABLE;
|
|
|
|
/* prescaler for i2c clock */
|
|
I2C2_CPSR0 = 60; /* 24 MHz / 400 kHz */
|
|
I2C2_CPSR1 = 0; /* MSB */
|
|
|
|
/* set i2c slave address of codec part */
|
|
I2C2_SLAD0 = AUDIO_I2C_ADDR << 1;
|
|
|
|
I2C2_CNTRL = 0x51;
|
|
}
|
|
|
|
|
|
/* returns != 0 when busy */
|
|
static int i2c_busy(void)
|
|
{
|
|
return (I2C2_SR & 1);
|
|
}
|
|
|
|
|
|
/* returns 0 on success, <0 otherwise */
|
|
int as3525_codec_write(int index, int value)
|
|
{
|
|
if (index == 0x21) {
|
|
/* prevent setting of the LREG_CP_not bit */
|
|
value &= ~(1 << 5);
|
|
}
|
|
|
|
/* check if still busy */
|
|
if (i2c_busy()) {
|
|
return -1;
|
|
}
|
|
|
|
/* start transfer */
|
|
I2C2_SADDR = index;
|
|
I2C2_CNTRL &= ~(1 << 1);
|
|
I2C2_DATA = value;
|
|
I2C2_DACNT = 1;
|
|
|
|
/* wait for transfer*/
|
|
while (i2c_busy());
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* returns value read on success, <0 otherwise */
|
|
int as3525_codec_read(int index)
|
|
{
|
|
/* check if still busy */
|
|
if (i2c_busy()) {
|
|
return -1;
|
|
}
|
|
|
|
/* start transfer */
|
|
I2C2_SADDR = index;
|
|
I2C2_CNTRL |= (1 << 1);
|
|
I2C2_DACNT = 1;
|
|
|
|
/* wait for transfer*/
|
|
while (i2c_busy());
|
|
|
|
return I2C2_DATA;
|
|
}
|
|
|