rockbox/firmware/export
Jens Arnold 93712c97ee WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12499 a1c6a512-1295-4272-9138-f99709370657
2007-02-26 18:36:58 +00:00
..
adc.h Target tree support for Iriver iFP. 2006-11-09 22:58:35 +00:00
arcotg_udc.h No functional changes, just reorganising code: 2007-02-16 22:13:21 +00:00
ata.h Do the CONFIG_LED define 2007-02-18 05:07:19 +00:00
ata_idle_notify.h dont allow the ata callbacks to be run less than once every 30s unless 2006-11-26 09:53:42 +00:00
ata_mmc.h
audio.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
backlight.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
bidi.h
bitswap.h
buffer.h
button.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
config-e200.h Battery reading support for Sansa. Still needs calibration of voltage->percent mappings and remaining time. Thanks to Rene Peinthor for doing most of the work. 2007-02-20 15:55:38 +00:00
config-fmrecorder.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-gigabeat.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h10.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-h10_5gb.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-h100.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h120.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-h300.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-iaudiox5.h Add software based bass/treble controls for targets which have no such functionality in hardware (currently only X5). They can also be used on any other SWCODEC target by adding #define HAVE_SW_TONE_CONTROLS in the relevant config-*.h file. Also remove some now unneeded zero checks when using get_replaygain_int(). Comments on sound quality are welcome as some parameters can still be fine-tuned. 2007-02-26 00:41:26 +00:00
config-ifp7xx.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-ipod3g.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-ipod4g.h Remap flash ROM to 0x20000000 on the ipods and H10s, and implement dbg_save_roms() in the debug menu for those targets to dump the content to a file. 2007-02-23 23:22:03 +00:00
config-ipodcolor.h Remap flash ROM to 0x20000000 on the ipods and H10s, and implement dbg_save_roms() in the debug menu for those targets to dump the content to a file. 2007-02-23 23:22:03 +00:00
config-ipodmini.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-ipodmini2g.h WM8711/8721/8731 have no tone controls, so enable the software tone controls for the respective targets. 2007-02-26 18:36:58 +00:00
config-ipodnano.h Remap flash ROM to 0x20000000 on the ipods and H10s, and implement dbg_save_roms() in the debug menu for those targets to dump the content to a file. 2007-02-23 23:22:03 +00:00
config-ipodvideo.h Remap flash ROM to 0x20000000 on the ipods and H10s, and implement dbg_save_roms() in the debug menu for those targets to dump the content to a file. 2007-02-23 23:22:03 +00:00
config-ondiofm.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-ondiosp.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-player.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-recorder.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-recorderv2.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config-tpj1022.h FS#6674: HAVE_XXX souldn't be defined with a value. 2007-02-20 14:57:14 +00:00
config.h Fix CONFIG_BACKLIGHT warnings. 2007-02-18 10:07:27 +00:00
cpu.h Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately. 2006-11-10 20:26:01 +00:00
debug.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
disk.h
eeprom_24cxx.h eeprom driver for the h3x0 series, cleaned up the h1x0 series driver a bit, added debug entry for h3x0 that allows to write to the eeprom 2006-08-15 22:54:06 +00:00
eeprom_settings.h Prepare core support for the iriver bootloader supporting ROM images 2007-01-12 18:34:00 +00:00
enc_base.h SWCODEC Encoders: Better declarations of chunk flags. Mark constants as unsigned long to match structure variable type. 2007-02-10 07:19:32 +00:00
fat.h Remove unused code, make comments c-style, make one private function static 2007-02-25 15:44:55 +00:00
fmradio.h Change the radio screen and recording screen to use the global_status structure for state. I guess global_status had been added already and I missed it. :D 2007-02-07 04:24:21 +00:00
fmradio_i2c.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
font.h sysfont.h is only needed by devices with bitmap displays. 2007-01-17 12:34:56 +00:00
gdb_api.h
general.h Forgot to use cvs add on a few new files in the fresh checkout I used. woops. 2006-11-06 18:18:05 +00:00
generic_i2c.h Removed executable flag 2007-01-09 23:29:07 +00:00
hangul.h
hwcompat.h
i2c-coldfire.h Patch #5347 by Rani Hod - Adds FM radio and recording features to the iAudio X5. 2006-07-21 08:42:28 +00:00
i2c-pp.h More PortalPlayer I2C unification work 2007-01-27 20:09:57 +00:00
i2c.h
i2s.h Move I2S initialisation out of the Wolfson codec driver 2006-12-09 19:18:18 +00:00
id3.h FS#6651 - Improved id3 comment extraction. 2007-02-17 08:46:32 +00:00
isp1362.h Removed executable flag 2007-01-09 23:29:07 +00:00
kernel.h Convert queues to use intptr_t for event data and return values as most of the time pointer are not passed and it should make some things a bit cleaner. 2006-12-19 16:50:07 +00:00
lcd-player-charset.h
lcd-remote.h Move target specific parts of the H100 remote LCD driver to target tree. 2007-02-25 22:09:14 +00:00
lcd.h Introduced LCD_FBHEIGHT in addition to the already existing LCD_FBWIDTH to ease framebuffer handling a bit. Added equivalent definitions for the remote LCD. 2007-02-20 19:31:34 +00:00
led.h
logf.h Support building tagcache db natively on PC using the core of the 2006-11-10 08:03:33 +00:00
m5636.h Removed executable flag 2007-01-09 23:29:07 +00:00
mas.h
mcf5249.h H300: (1) Use DMA for LCD updates, with auto-aligned line reads. Speeds up LCD updates by ~ 75% at 11MHz and 45MHz. Only ~ 11% speedup at 124MHz due to (2). (2) Less aggressive LCD transfer timing at 124MHz. With the previous timing, slightly corrupted display contents was reported, and with DMA transfers at least 4 waitstates are needed to make updates work at all. * A table in system-iriver.c shows settings for all integer multiples of the base clock frequency (info for developers, not yet complete). 2006-11-02 20:50:50 +00:00
mcf5250.h
mp3_playback.h
mp3data.h Shave a few bytes off the binary size, especially on hwcodec targets 2007-02-15 22:55:22 +00:00
mpeg.h
panic.h
pcf50605.h Move all iPod targets into the target tree. FS#5890 2006-10-05 10:58:51 +00:00
pcf50606.h FS#4770 - Add USB charging for the H300 series 2007-02-01 10:47:22 +00:00
pcm_playback.h Small change to PCM recording API for low latency effects. Latency can be as low as 14 samples from input to output including the FIFOs (ColdFire) but 16 is more reasonable an expectation if only tranferring one sample per interrupt (\!). May convert PCM playback to use the same method as it can still be used in the old manner with some slight mods but has the potential to enable new features since it is more flexible. 2006-12-06 08:34:55 +00:00
pcm_record.h Place all recording functionality on pcmrec thread to serialize all recording operations. Button mash problems should be ruled out of pcm_record.c. Add additional lightweight checks by default and display any warnings that occurred during recording in first line of recording screen when they occur by blinking back and forth from warning display to normal line (Warning: <hex bitmask>). Warnings are cleared when beginning a new recording so write the number down if you see it and file a report. Add heavier checks when PCMREC_PARANOID is defined in the player config header (encoders and pcm_record must be aware of the define since it changes the chunk header format). These checks are mainly concerned with things that may cause skipping but also add unwanted overhead for normal operation. Best used with logf enabled. 2006-12-10 14:21:31 +00:00
pcm_sampr.h avoid using #if on undefined symbols, in preparation for -Wundef 2007-02-17 21:15:06 +00:00
pnx0101.h Iriver iFP7xx sound support. 2006-08-12 21:03:23 +00:00
power.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
powermgmt.h Improved power management (FS#3001). Shutdown rockbox when the battery gets to a level where the device doesn't function properly. Calculate remaining charging time while charging (rather than remaining running time). Show "Low Battery" and "Battery Empty" warnings. Also fixes FS#4786. 2006-11-11 01:18:57 +00:00
pp5002.h Remap flash ROM to 0x20000000 on the ipods and H10s, and implement dbg_save_roms() in the debug menu for those targets to dump the content to a file. 2007-02-23 23:22:03 +00:00
pp5020.h Remap flash ROM to 0x20000000 on the ipods and H10s, and implement dbg_save_roms() in the debug menu for those targets to dump the content to a file. 2007-02-23 23:22:03 +00:00
pp5024.h added mostly dummy changes to allow building of a Sansa e200 bootloader 2006-08-01 22:28:14 +00:00
profile.h Fix profile builds 2006-08-24 13:10:20 +00:00
replaygain.h Add support for parsing binary data ID3 tags. Add support for parsing RVA2 ID3 tags for replaygain values instead of TXXX tags when playing files tagged with ID3v2.4. Patch by psyche78 (task #2937) 2006-07-20 10:35:20 +00:00
rolo.h
rtc.h
s3c2440.h Setup LCD ourselves; move LCD buffer and TTB to free up 1.7MB of memory 2007-01-13 02:24:15 +00:00
serial.h Logf output on the serial port for h100 targets 2006-10-12 20:22:16 +00:00
sh7034.h
sound.h Add software based bass/treble controls for targets which have no such functionality in hardware (currently only X5). They can also be used on any other SWCODEC target by adding #define HAVE_SW_TONE_CONTROLS in the relevant config-*.h file. Also remove some now unneeded zero checks when using get_replaygain_int(). Comments on sound quality are welcome as some parameters can still be fine-tuned. 2007-02-26 00:41:26 +00:00
spdif.h H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. 2006-11-13 23:21:54 +00:00
structec.h Make database endianess independent. 2007-02-13 21:51:18 +00:00
system.h Fix broken builds 2007-01-22 10:58:40 +00:00
thread.h Allow one more thread on swcodec to make mpegplayer work on targets with remote LCD and voice file present. 2007-01-07 11:59:59 +00:00
timer.h Change if CONFIG_CPU==PP50XX to ifdef CPU_PP where appropriate 2006-11-22 00:41:30 +00:00
tlv320.h put back the return types which got lost in the previous commit 2006-12-06 13:48:50 +00:00
tuner.h Fix remaining CONFIG_TUNER checks. 2007-02-18 08:46:12 +00:00
uda1380.h put back the return types which got lost in the previous commit 2006-12-06 13:48:50 +00:00
usb.h FS#4770 - Add USB charging for the H300 series 2007-02-01 10:47:22 +00:00
usb_serial.h
wm8731l.h FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). 2006-12-18 01:52:21 +00:00
wm8758.h FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). 2006-12-18 01:52:21 +00:00
wm8975.h move some audio driver specific code to the correspoding files 2006-12-06 13:34:15 +00:00
wmcodec.h Move I2S initialisation out of the Wolfson codec driver 2006-12-09 19:18:18 +00:00