rockbox/firmware/export/config/sansafuzev2.h

/*
 * This config file is for the Sandisk Sansa Fuze v2
 */
#define TARGET_TREE /* this target is using the target tree system */

/* For Rolo and boot loader */
#define MODEL_NUMBER 68
#define MODEL_NAME   "Sandisk Sansa Fuze v2"

#define HW_SAMPR_CAPS       SAMPR_CAP_ALL

/* define this if you have recording possibility */
#define HAVE_RECORDING

#define REC_SAMPR_CAPS      SAMPR_CAP_ALL

/* Default recording levels */
#define DEFAULT_REC_MIC_GAIN    23
#define DEFAULT_REC_LEFT_GAIN   23
#define DEFAULT_REC_RIGHT_GAIN  23

/* Define bitmask of input sources - recordable bitmask can be defined
   explicitly if different */
#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO)

/* define this if you have a bitmap LCD display */
#define HAVE_LCD_BITMAP
/* define this if you have a colour LCD */
#define HAVE_LCD_COLOR

#ifndef BOOTLOADER/* define this if you want album art for this target */
#define HAVE_ALBUMART

/* define this to enable bitmap scaling */
#define HAVE_BMP_SCALING

/* define this to enable JPEG decoding */
#define HAVE_JPEG

/* define this if you have access to the quickscreen */
#define HAVE_QUICKSCREEN

/* define this if you have access to the pitchscreen */
#define HAVE_PITCHSCREEN

/* define this if you would like tagcache to build on this target */
#define HAVE_TAGCACHE

/* define this if you have LCD enable function */
//#define HAVE_LCD_ENABLE

/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
   should be defined as well.
#define HAVE_LCD_SLEEP
#define HAVE_LCD_SLEEP_SETTING
*/

/* define this if you can flip your LCD */
//#define HAVE_LCD_FLIP

/* define this if you can invert the colours on your LCD */
//#define HAVE_LCD_INVERT


/* define this if you have a real-time clock */
#define CONFIG_RTC RTC_AS3514

/* There is no hardware tone control */
#define HAVE_SW_TONE_CONTROLS

/* define this if the unit uses a scrollwheel for navigation */
#define HAVE_SCROLLWHEEL
/* define to activate advanced wheel acceleration code */
#define HAVE_WHEEL_ACCELERATION
/* define from which rotation speed [degree/sec] on the acceleration starts */
#define WHEEL_ACCEL_START 540
/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
#define WHEEL_ACCELERATION  1

#endif /* !BOOTLOADER */

/* put the lcd frame buffer in IRAM */
#define IRAM_LCDFRAMEBUFFER //IBSS_ATTR

#define CONFIG_KEYPAD SANSA_FUZE_PAD

/* Define this to enable morse code input */
#define HAVE_MORSE_INPUT

/* Define this if you do software codec */
#define CONFIG_CODEC SWCODEC


/* LCD dimensions */
#define LCD_WIDTH  220
#define LCD_HEIGHT 176
#define LCD_DEPTH  16   /* 65536 colours */
#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 swapped */


/* AS3514 or newer */
#define HAVE_AS3514
#define HAVE_AS3543

/* Define this if you have a software controlled poweroff */
#define HAVE_SW_POWEROFF

/* Some Sansa Fuzes seem to be FAT16 formatted */
#define HAVE_FAT16SUPPORT

/* The number of bytes reserved for loadable codecs */
#define CODEC_SIZE (0x100000-0x8000)

/* The number of bytes reserved for loadable plugins */
#define PLUGIN_BUFFER_SIZE 0x80000

#define AB_REPEAT_ENABLE 1

/* FM Tuner - suspected to be the SI4702 */
#define CONFIG_TUNER SI4700
/* #define HAVE_TUNER_PWR_CTRL */

/* Define this for LCD backlight available */
#define HAVE_BACKLIGHT
#define HAVE_BACKLIGHT_BRIGHTNESS

/* Main LCD backlight brightness range and defaults */
#define MIN_BRIGHTNESS_SETTING      1
#define MAX_BRIGHTNESS_SETTING     25
#define DEFAULT_BRIGHTNESS_SETTING  6

/* define this if you have a light associated with the buttons */
#define HAVE_BUTTON_LIGHT

/* Which backlight fading type? */
#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_SETTING

/* define this if you have a flash memory storage */
#define HAVE_FLASH_STORAGE

/* define this if the flash memory uses the SecureDigital Memory Card protocol */
#define CONFIG_STORAGE STORAGE_SD

#define BATTERY_CAPACITY_DEFAULT 550    /* default battery capacity */
#define BATTERY_CAPACITY_MIN 550        /* min. capacity selectable */
#define BATTERY_CAPACITY_MAX 550        /* max. capacity selectable */
#define BATTERY_CAPACITY_INC 0          /* capacity increment */
#define BATTERY_TYPES_COUNT  1          /* only one type */

/* Charging implemented in a target-specific algorithm */
#define CONFIG_CHARGING CHARGING_TARGET

/* define this if the unit can be powered or charged via USB */
#define HAVE_USB_POWER

/* Define this if you have an AMS AS3525v2 */
#define CONFIG_CPU AS3525v2

/* Define this if you want to use the AS2525 i2c interface */
#define CONFIG_I2C I2C_AS3525

/* define current usage levels (based on battery bench) */
#define CURRENT_NORMAL     30
#define CURRENT_BACKLIGHT  30
#define CURRENT_RECORD     CURRENT_NORMAL

/* Define this to the CPU frequency */
#define CPU_FREQ      240000000

/* Type of LCD */
#define CONFIG_LCD LCD_FUZE

/* Offset ( in the firmware file's header ) to the file CRC and data. These are
   only used when loading the old format rockbox.e200 file */
#define FIRMWARE_OFFSET_FILE_CRC    0x0
#define FIRMWARE_OFFSET_FILE_DATA   0x8

#ifndef BOOTLOADER
#define HAVE_MULTIDRIVE
#define NUM_DRIVES 2
#define HAVE_HOTSWAP
#endif

#ifndef BOOTLOADER

#define USB_HANDLED_BY_OF

/* USB On-the-go */
#define CONFIG_USBOTG USBOTG_AS3525

/* enable these for the experimental usb stack */
#define HAVE_USBSTACK
#define USB_VENDOR_ID 0x0781
#define USB_PRODUCT_ID 0x74c3   /* MSC = 0x74c3, MTP = 0x74c2 */

#endif /* !BOOTLOADER */

/* Define this if you have adjustable CPU frequency */
//#define HAVE_ADJUSTABLE_CPU_FREQ

#define BOOTFILE_EXT    "sansa"
#define BOOTFILE        "rockbox." BOOTFILE_EXT
#define BOOTDIR "/.rockbox"

#define ICODE_ATTR_TREMOR_NOT_MDCT

#define INCLUDE_TIMEOUT_API

/* Define this if a programmable hotkey is mapped */
#define HAVE_HOTKEY