rockbox/firmware/drivers/lcd-ipodvideo.c

/***************************************************************************
 *             __________               __   ___.
 *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
 *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
 *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
 *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
 *                     \/            \/     \/    \/            \/
 * $Id$
 *
 * LCD driver for iPod Video
 * 
 * Based on code from the ipodlinux project - http://ipodlinux.org/
 * Adapted for Rockbox in December 2005
 *
 * Original file: linux/arch/armnommu/mach-ipod/fb.c
 *
 * Copyright (c) 2003-2005 Bernard Leach (leachbj@bouncycastle.org)
 *
 * All files in this archive are subject to the GNU General Public License.
 * See the file COPYING in the source tree root for full license agreement.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ****************************************************************************/
#include "config.h"
#include "cpu.h"
#include "lcd.h"
#include "kernel.h"
#include "system.h"

/*** hardware configuration ***/

void lcd_set_contrast(int val)
{
  /* TODO: Implement lcd_set_contrast() */
  (void)val;
}

void lcd_set_invert_display(bool yesno)
{
  /* TODO: Implement lcd_set_invert_display() */
  (void)yesno;
}

/* turn the display upside down (call lcd_update() afterwards) */
void lcd_set_flip(bool yesno)
{
  /* TODO: Implement lcd_set_flip() */
  (void)yesno;
}

/* LCD init */
void lcd_init_device(void)
{  
    /* iPodLinux doesn't appear have any LCD init code for the Video */
}

/*** update functions ***/

/* Performance function that works with an external buffer
   note that by and bheight are in 4-pixel units! */
void lcd_blit(const fb_data* data, int x, int by, int width,
              int bheight, int stride)
{
    /* TODO: Implement lcd_blit() */
    (void)data;
    (void)x;
    (void)by;
    (void)width;
    (void)bheight;
    (void)stride;
}

static inline void lcd_bcm_write32(unsigned address, unsigned value)
{
    /* write out destination address as two 16bit values */
    outw(address, 0x30010000);
    outw((address >> 16), 0x30010000);

    /* wait for it to be write ready */
    while ((inw(0x30030000) & 0x2) == 0);

    /* write out the value low 16, high 16 */
    outw(value, 0x30000000);
    outw((value >> 16), 0x30000000);
}

static void lcd_bcm_setup_rect(unsigned cmd,
                               unsigned start_horiz, 
                               unsigned start_vert, 
                               unsigned max_horiz,
                               unsigned max_vert, 
                               unsigned count)
{
    lcd_bcm_write32(0x1F8, 0xFFFA0005);
    lcd_bcm_write32(0xE0000, cmd);
    lcd_bcm_write32(0xE0004, start_horiz);
    lcd_bcm_write32(0xE0008, start_vert);
    lcd_bcm_write32(0xE000C, max_horiz);
    lcd_bcm_write32(0xE0010, max_vert);
    lcd_bcm_write32(0xE0014, count);
    lcd_bcm_write32(0xE0018, count);
    lcd_bcm_write32(0xE001C, 0);
}

static unsigned lcd_bcm_read32(unsigned address) {
    while ((inw(0x30020000) & 1) == 0);

    /* write out destination address as two 16bit values */
    outw(address, 0x30020000);
    outw((address >> 16), 0x30020000);

    /* wait for it to be read ready */
    while ((inw(0x30030000) & 0x10) == 0);

    /* read the value */
    return inw(0x30000000) | inw(0x30000000) << 16;
}

/* Update a fraction of the display. */
void lcd_update_rect(int x, int y, int width, int height) ICODE_ATTR;
void lcd_update_rect(int x, int y, int width, int height)
{
    static int finishup_needed = 0;

    {
        int endy = x + width;
        /* Ensure x and width are both even - so we can read 32-bit aligned 
           data from lcd_framebuffer */
        x &= ~1;
        width &= ~1;
        if (x + width < endy) {
            width += 2;
        }
    }

    if (finishup_needed) {
        unsigned int data;
        /* Bottom-half of original lcd_bcm_finishup() function */
        do {
            /* This function takes about 14ms to execute - so we yield() */
            yield();
            data = lcd_bcm_read32(0x1F8);
        } while (data == 0xFFFA0005 || data == 0xFFFF);
    }

    lcd_bcm_read32(0x1FC);

    {
        int rect1, rect2, rect3, rect4;
        int count = (width * height) << 1;
        /* calculate the drawing region */
        rect1 = x;                         /* start horiz */
        rect2 = y;                         /* start vert */
        rect3 = (x + width) - 1;           /* max horiz */
        rect4 = (y + height) - 1;          /* max vert */

        /* setup the drawing region */
        lcd_bcm_setup_rect(0x34, rect1, rect2, rect3, rect4, count);
    }

    /* write out destination address as two 16bit values */
    outw((0xE0020 & 0xffff), 0x30010000);
    outw((0xE0020 >> 16), 0x30010000);

    /* wait for it to be write ready */
    while ((inw(0x30030000) & 0x2) == 0);

    {
        unsigned short *src = (unsigned short*)&lcd_framebuffer[y][x];
        unsigned short *end = &src[LCD_WIDTH * height];
        int line_rem = (LCD_WIDTH - width);
        while (src < end) {
            /* for each column */
            unsigned short *end_line = src + width;
            while (src < end_line) {
                /* write out two pixels */
                outw(*(src++), 0x30000000);
                outw(*(src++), 0x30000000);
            }
            src += line_rem;
        }
    }

    /* Top-half of original lcd_bcm_finishup() function */
    outw(0x31, 0x30030000); 

    lcd_bcm_read32(0x1FC);

    finishup_needed = 1;
}

/* Update the display.
   This must be called after all other LCD functions that change the display. */
void lcd_update(void)
{
    lcd_update_rect(0, 0, LCD_WIDTH, LCD_HEIGHT);
}