rockbox/firmware/target/arm/iriver/h10/button-h10.c
Daniel Stenberg 86bff1cf56 Barry Wardell's initial work for the iriver H10 port
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10447 a1c6a512-1295-4272-9138-f99709370657
2006-08-03 20:18:31 +00:00

69 lines
1.9 KiB
C

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by Barry Wardell
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
/* Custom written for the H10 based on analysis of the GPIO data */
#include <stdlib.h>
#include "config.h"
#include "cpu.h"
#include "system.h"
#include "button.h"
#include "kernel.h"
#include "backlight.h"
#include "adc.h"
#include "system.h"
void button_init_device(void)
{
/* No hardware initialisation required as it is done by the bootloader */
}
bool button_hold(void)
{
return (GPIOA_INPUT_VAL & 0x40)?false:true;
}
/*
* Get button pressed from hardware
*/
int button_read_device(void)
{
int btn = BUTTON_NONE;
unsigned char state;
static bool hold_button = false;
#if 0
/* light handling */
if (hold_button && !button_hold())
{
backlight_on();
}
#endif
hold_button = button_hold();
state = GPIOA_INPUT_VAL & 0xf8;
if ((state & 0x8) == 0) btn |= BUTTON_FF;
if ((state & 0x16) == 0) btn |= BUTTON_PLAY;
if ((state & 0x32) == 0) btn |= BUTTON_REW;
if ((state & 0x64) == 0) btn |= BUTTON_RIGHT;
if ((state & 0x128) == 0) btn |= BUTTON_LEFT;
return btn;
}