2acc0ac542
later. We still need to hunt down snippets used that are not. 1324 modified files... http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
148 lines
4.7 KiB
C
148 lines
4.7 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2005 by Linus Nielsen Feltzing
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "system.h"
|
|
#include "kernel.h"
|
|
#include "pcf50606.h"
|
|
#include "button-target.h"
|
|
#include "logf.h"
|
|
|
|
/* Used by the bootloader to find out what caused the device to start */
|
|
unsigned char pcf50606_intregs[3];
|
|
|
|
static bool usb_ch_enabled = false;
|
|
|
|
/* These voltages were determined by measuring the output of the PCF50606
|
|
on a running H300, and verified by disassembling the original firmware */
|
|
static void set_voltages(void)
|
|
{
|
|
static const unsigned char buf[5] =
|
|
{
|
|
0xf4, /* IOREGC = 2.9V, ON in all states */
|
|
0xef, /* D1REGC = 2.4V, ON in all states */
|
|
0x18, /* D2REGC = 3.3V, OFF in all states */
|
|
0xf0, /* D3REGC = 2.5V, ON in all states */
|
|
0xef, /* LPREGC1 = 2.4V, ON in all states */
|
|
};
|
|
|
|
pcf50606_write_multiple(0x23, buf, 5);
|
|
}
|
|
|
|
static void init_pmu_interrupts(void)
|
|
{
|
|
/* inital data is interrupt masks */
|
|
unsigned char data[3] =
|
|
{
|
|
~0x00,
|
|
~0x00,
|
|
~0x06, /* unmask ACDREM, ACDINS */
|
|
};
|
|
|
|
/* make sure GPI6 interrupt is off before unmasking anything */
|
|
and_l(~0x0f000000, &INTPRI5); /* INT38 - Priority 0 (Off) */
|
|
|
|
/* unmask the PMU interrupts we want to service */
|
|
pcf50606_write_multiple(0x05, data, 3);
|
|
/* clear INT1-3 as these are left set after standby */
|
|
pcf50606_read_multiple(0x02, pcf50606_intregs, 3);
|
|
|
|
/* Set to read pcf50606 INT but keep GPI6 off until init completes */
|
|
and_l(~0x00000040, &GPIO_ENABLE);
|
|
or_l(0x00000040, &GPIO_FUNCTION);
|
|
or_l(0x00004000, &GPIO_INT_EN); /* GPI6 H-L */
|
|
}
|
|
|
|
static inline void enable_pmu_interrupts(void)
|
|
{
|
|
/* clear pending GPI6 interrupts first or it may miss the first
|
|
H-L transition */
|
|
or_l(0x00004000, &GPIO_INT_CLEAR);
|
|
or_l(0x03000000, &INTPRI5); /* INT38 - Priority 3 */
|
|
}
|
|
|
|
/* enables/disables USB charging
|
|
* ATTENTION: make sure to set the irq level
|
|
* to highest before calling this function! */
|
|
void pcf50606_set_usb_charging(bool on)
|
|
{
|
|
/* USB charging is controlled by GPOOD0:
|
|
High-Z: Charge enable
|
|
Pulled down: Charge disable
|
|
*/
|
|
if (on)
|
|
pcf50606_write(0x39, 0x00);
|
|
else
|
|
pcf50606_write(0x39, 0x07);
|
|
|
|
usb_ch_enabled = on;
|
|
|
|
logf("pcf50606_set_usb_charging(%s)\n", on ? "on" : "off" );
|
|
}
|
|
|
|
bool pcf50606_usb_charging_enabled(void)
|
|
{
|
|
/* TODO: read the state of the GPOOD2 register... */
|
|
return usb_ch_enabled;
|
|
}
|
|
|
|
void pcf50606_init(void)
|
|
{
|
|
pcf50606_i2c_init();
|
|
|
|
/* initialize pmu interrupts but don't service them yet */
|
|
init_pmu_interrupts();
|
|
set_voltages();
|
|
|
|
pcf50606_write(0x08, 0x60); /* Wake on USB and charger insertion */
|
|
pcf50606_write(0x09, 0x05); /* USB and ON key debounce: 14ms */
|
|
pcf50606_write(0x29, 0x1C); /* Disable the unused MBC module */
|
|
|
|
pcf50606_set_usb_charging(false); /* Disable USB charging atm. */
|
|
|
|
pcf50606_write(0x35, 0x13); /* Backlight PWM = 512Hz 50/50 */
|
|
pcf50606_write(0x3a, 0x3b); /* PWM output on GPOOD1 */
|
|
|
|
pcf50606_write(0x33, 0x8c); /* Accessory detect: ACDAPE=1, THRSHLD=2.20V */
|
|
|
|
enable_pmu_interrupts(); /* allow GPI6 interrupts from PMU now */
|
|
}
|
|
|
|
/* PMU interrupt */
|
|
void GPI6(void) __attribute__ ((interrupt_handler));
|
|
void GPI6(void)
|
|
{
|
|
unsigned char data[3]; /* 0 = INT1, 1 = INT2, 2 = INT3 */
|
|
|
|
/* Clear pending GPI6 interrupts */
|
|
or_l(0x00004000, &GPIO_INT_CLEAR);
|
|
|
|
/* clear pending interrupts from pcf50606 */
|
|
pcf50606_read_multiple(0x02, data, 3);
|
|
|
|
if (data[2] & 0x06)
|
|
{
|
|
/* ACDINS/ACDREM */
|
|
/* Check if the button driver should actually scan main buttons or not
|
|
- bias towards "yes" out of paranoia. */
|
|
button_enable_scan((data[2] & 0x02) != 0 ||
|
|
(pcf50606_read(0x33) & 0x01) != 0);
|
|
}
|
|
}
|