ba809183a8
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5347 a1c6a512-1295-4272-9138-f99709370657
196 lines
7 KiB
ArmAsm
196 lines
7 KiB
ArmAsm
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2004 by Jens Arnold
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
|
|
.section .icode,"ax",@progbits
|
|
|
|
#if CONFIG_CPU == SH7034
|
|
.align 2
|
|
.global _memcpy
|
|
.type _memcpy,@function
|
|
|
|
/* Copies <length> bytes of data in memory from <source> to <dest>
|
|
* This version is optimized for speed
|
|
*
|
|
* arguments:
|
|
* r4 - destination address
|
|
* r5 - source address
|
|
* r6 - length
|
|
*
|
|
* return value:
|
|
* r0 - destination address (like ANSI version)
|
|
*
|
|
* register usage:
|
|
* r0 - data / temporary
|
|
* r1 - bit mask for rounding to long bounds / 2nd data
|
|
* r2 - first long bound (only if >= 12 bytes)
|
|
* r3 - last long bound (-4) (only if >= 12 bytes)
|
|
* r4 - current dest address
|
|
* r5 - current source address
|
|
* r6 - source end address
|
|
* r7 - stored dest start address
|
|
*
|
|
* The instruction order below is devised in a way to utilize the pipelining
|
|
* of the SH1 to the max. The routine also tries to utilize fast page mode.
|
|
*/
|
|
|
|
_memcpy:
|
|
add r5,r6 /* r6 = source_end */
|
|
mov r4,r7 /* store for returning */
|
|
add #-8,r4 /* adjust for early increments (max. 2 longs) */
|
|
|
|
mov r6,r0
|
|
add #-12,r0 /* r0 = r6 - 12; don't go below 12 here! */
|
|
cmp/hs r5,r0 /* >= 12 bytes to copy? */
|
|
bf .start_b2 /* no, jump into byte loop */
|
|
|
|
mov #-4,r1 /* r1 = 0xFFFFFFFC */
|
|
|
|
mov r5,r2
|
|
add #3,r2
|
|
and r1,r2 /* r2 = first source long bound */
|
|
mov r6,r3
|
|
add #-4,r3 /* end offset for copying 2 longs per pass */
|
|
bra .start_b1 /* jump into leading byte loop */
|
|
and r1,r3 /* r3 = last source long bound - 4 */
|
|
|
|
/* leading byte loop: copies 0..3 bytes */
|
|
.align 2
|
|
.loop_b1:
|
|
mov.b @r5+,r0 /* load byte & increment source addr */
|
|
add #1,r4 /* increment dest addr */
|
|
mov.b r0,@(7,r4) /* store byte */
|
|
.start_b1:
|
|
cmp/hi r5,r2 /* runs r5 up to first long bound */
|
|
bt .loop_b1
|
|
/* now r5 is always at a long boundary */
|
|
/* -> memory reading is done in longs for all dest alignments */
|
|
|
|
/* selector for main copy loop */
|
|
mov r4,r0
|
|
tst #3,r0 /* dest now also at long bound? */
|
|
bt .loop2_l /* yes, do long copy */
|
|
tst #1,r0 /* dest now at least at word bound? */
|
|
bt .start4_w /* yes, do word copy */
|
|
|
|
/* main loop for byte aligned destination (fast) */
|
|
/* copies 1 long per pass */
|
|
add #4,r3 /* reset end offset */
|
|
add #-1,r4 /* adjust to word alignment for word write+ */
|
|
|
|
.loop4_b:
|
|
mov.l @r5+,r0 /* load a long & increment source addr */
|
|
add #4,r4 /* increment dest addr */
|
|
mov.b r0,@(8,r4) /* store low byte */
|
|
shlr8 r0 /* get middle 2 bytes */
|
|
mov.w r0,@(6,r4) /* store as word+ */
|
|
shlr16 r0 /* get upper byte */
|
|
mov.b r0,@(5,r4) /* and store */
|
|
cmp/hi r5,r3 /* runs r5 up to last long bound */
|
|
bt .loop4_b
|
|
|
|
bra .start_b2 /* jump to trailing byte loop */
|
|
add #1,r4 /* readjust */
|
|
|
|
/* main loop for word aligned destination (faster) */
|
|
/* copies 2 longs per pass, utilizing fast page mode */
|
|
.start4_w:
|
|
add #-2,r4 /* adjust to long alignment for long write+ */
|
|
|
|
.loop4_w:
|
|
mov.l @r5+,r1 /* load first long & increment source addr */
|
|
add #8,r4 /* increment dest addr */
|
|
mov.l @r5+,r0 /* load second long & increment source addr */
|
|
cmp/hi r5,r3 /* runs r5 up to last or second last long bound */
|
|
mov.w r0,@(8,r4) /* store low word of second long */
|
|
xtrct r1,r0 /* extract low word of first long & high word of second long */
|
|
mov.l r0,@(4,r4) /* and store as long+ */
|
|
swap.w r1,r0 /* get high word of first long */
|
|
mov.w r0,@(2,r4) /* and store it */
|
|
bt .loop4_w
|
|
|
|
add #2,r4 /* readjust destination */
|
|
add #4,r3 /* reset end offset */
|
|
cmp/hi r5,r3 /* one long left? */
|
|
bf .start_b2 /* no, jump to trailing byte loop */
|
|
|
|
mov.l @r5+,r0 /* load last long & increment source addr */
|
|
add #4,r4 /* increment dest addr */
|
|
mov.w r0,@(6,r4) /* store low word */
|
|
shlr16 r0 /* get high word */
|
|
bra .start_b2 /* jump to trailing byte loop */
|
|
mov.w r0,@(4,r4) /* and store it */
|
|
|
|
/* main loop for long aligned destination (fastest) */
|
|
/* copies 2 longs per pass, utilizing fast page mode */
|
|
.loop2_l:
|
|
mov.l @r5+,r1 /* load first long & increment source addr */
|
|
add #8,r4 /* increment dest addr */
|
|
mov.l @r5+,r0 /* load second long & increment source addr */
|
|
cmp/hi r5,r3 /* runs r5 up to last or second last long bound */
|
|
mov.l r1,@r4 /* store first long */
|
|
mov.l r0,@(4,r4) /* store second long; NOT ALIGNED - no speed loss here! */
|
|
bt .loop2_l
|
|
|
|
add #4,r3 /* reset end offset */
|
|
cmp/hi r5,r3 /* one long left? */
|
|
bf .start_b2 /* no, jump to trailing byte loop */
|
|
|
|
mov.l @r5+,r0 /* load last long & increment source addr */
|
|
add #4,r4 /* increment dest addr */
|
|
bra .start_b2 /* jump to trailing byte loop */
|
|
mov.l r0,@(4,r4) /* store last long */
|
|
|
|
/* trailing byte loop: copies 0..3 bytes (or all for < 12 in total) */
|
|
.loop_b2:
|
|
mov.b @r5+,r0 /* load byte & increment source addr */
|
|
add #1,r4 /* increment dest addr */
|
|
mov.b r0,@(7,r4) /* store byte */
|
|
.start_b2:
|
|
cmp/hi r5,r6 /* runs r5 up to end address */
|
|
bt .loop_b2
|
|
|
|
rts
|
|
mov r7,r0 /* return dest start address */
|
|
.end:
|
|
.size _memcpy,.end-_memcpy
|
|
#elif CONFIG_CPU == MCF5249
|
|
.align 2
|
|
.global memcpy
|
|
.type memcpy,@function
|
|
|
|
/* Copies <length> bytes of data in memory from <source> to <dest>
|
|
* This version is not optimized at all
|
|
*/
|
|
memcpy:
|
|
move.l (4,%sp),%a1 /* Destination */
|
|
move.l (8,%sp),%a0 /* Source */
|
|
move.l (12,%sp),%d1 /* Length */
|
|
|
|
cmp.l #0,%d1
|
|
bra.b .byteloopend
|
|
|
|
.byteloop:
|
|
move.b (%a0)+,(%a1)+
|
|
subq.l #1,%d1
|
|
.byteloopend:
|
|
bne.b .byteloop
|
|
|
|
rts
|
|
#endif
|