780f79e7a4
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11504 a1c6a512-1295-4272-9138-f99709370657
263 lines
6.2 KiB
C
263 lines
6.2 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2002 by Linus Nielsen Feltzing
|
|
*
|
|
* All files in this archive are subject to the GNU General Public License.
|
|
* See the file COPYING in the source tree root for full license agreement.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "config.h"
|
|
#include "cpu.h"
|
|
#include <stdbool.h>
|
|
#include "adc.h"
|
|
#include "kernel.h"
|
|
#include "system.h"
|
|
#include "power.h"
|
|
#include "hwcompat.h"
|
|
#include "logf.h"
|
|
#include "pcf50605.h"
|
|
#include "pcf50606.h"
|
|
#include "usb.h"
|
|
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
bool charger_enabled;
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_TUNER
|
|
|
|
static bool powered = false;
|
|
|
|
bool radio_powered(void)
|
|
{
|
|
return powered;
|
|
}
|
|
|
|
bool radio_power(bool status)
|
|
{
|
|
bool old_status = powered;
|
|
powered = status;
|
|
#ifdef HAVE_TUNER_PWR_CTRL
|
|
if (status)
|
|
{
|
|
and_b(~0x04, &PADRL); /* drive PA2 low for tuner enable */
|
|
sleep(1); /* let the voltage settle */
|
|
}
|
|
else
|
|
or_b(0x04, &PADRL); /* drive PA2 high for tuner disable */
|
|
#endif
|
|
return old_status;
|
|
}
|
|
|
|
#endif /* #ifdef CONFIG_TUNER */
|
|
|
|
#ifndef SIMULATOR
|
|
|
|
void power_init(void)
|
|
{
|
|
#ifdef HAVE_POWEROFF_ON_PB5
|
|
PBCR2 &= ~0x0c00; /* GPIO for PB5 */
|
|
or_b(0x20, &PBIORL);
|
|
or_b(0x20, &PBDRL); /* hold power */
|
|
#endif
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
PBCR2 &= ~0x0c00; /* GPIO for PB5 */
|
|
or_b(0x20, &PBIORL); /* Set charging control bit to output */
|
|
charger_enable(false); /* Default to charger OFF */
|
|
#endif
|
|
#ifdef HAVE_TUNER_PWR_CTRL
|
|
PACR2 &= ~0x0030; /* GPIO for PA2 */
|
|
or_b(0x04, &PADRL); /* drive PA2 high for tuner disable */
|
|
or_b(0x04, &PAIORL); /* output for PA2 */
|
|
#endif
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_CHARGING
|
|
bool charger_inserted(void)
|
|
{
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
/* Recorder */
|
|
return adc_read(ADC_EXT_POWER) > 0x100;
|
|
#elif defined (HAVE_FMADC)
|
|
/* FM or V2, can also charge from the USB port */
|
|
return (adc_read(ADC_CHARGE_REGULATOR) < 0x1FF);
|
|
#elif defined(TOSHIBA_GIGABEAT_F)
|
|
return false;
|
|
#else
|
|
/* Player */
|
|
return (PADR & 1) == 0;
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_CHARGING */
|
|
|
|
#if CONFIG_CHARGING == CHARGING_CONTROL
|
|
void charger_enable(bool on)
|
|
{
|
|
if(on)
|
|
{
|
|
and_b(~0x20, &PBDRL);
|
|
charger_enabled = 1;
|
|
}
|
|
else
|
|
{
|
|
or_b(0x20, &PBDRL);
|
|
charger_enabled = 0;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_CHARGING == CHARGING_MONITOR
|
|
/* Returns true if the unit is charging the batteries. */
|
|
bool charging_state(void) {
|
|
#if CONFIG_BATTERY == BATT_LIION2200
|
|
/* We use the information from the ADC_EXT_POWER ADC channel, which
|
|
tells us the charging current from the LTC1734. When DC is
|
|
connected (either via the external adapter, or via USB), we try
|
|
to determine if it is actively charging or only maintaining the
|
|
charge. My tests show that ADC readings below about 0x80 means
|
|
that the LTC1734 is only maintaining the charge. */
|
|
return adc_read(ADC_EXT_POWER) >= 0x80;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#ifndef HAVE_MMC
|
|
void ide_power_enable(bool on)
|
|
{
|
|
(void)on;
|
|
|
|
#if defined(TOSHIBA_GIGABEAT_F)
|
|
/* Gigabeat TODO */
|
|
#else /* SH1 based archos */
|
|
bool touched = false;
|
|
#ifdef NEEDS_ATA_POWER_ON
|
|
if(on)
|
|
{
|
|
#ifdef ATA_POWER_PLAYERSTYLE
|
|
or_b(0x10, &PBDRL);
|
|
#else
|
|
or_b(0x20, &PADRL);
|
|
#endif
|
|
touched = true;
|
|
}
|
|
#endif /* NEEDS_ATA_POWER_ON */
|
|
#ifdef HAVE_ATA_POWER_OFF
|
|
if(!on)
|
|
{
|
|
#ifdef ATA_POWER_PLAYERSTYLE
|
|
and_b(~0x10, &PBDRL);
|
|
#else
|
|
and_b(~0x20, &PADRL);
|
|
#endif
|
|
touched = true;
|
|
}
|
|
#endif /* HAVE_ATA_POWER_OFF */
|
|
|
|
/* late port preparation, else problems with read/modify/write
|
|
of other bits on same port, while input and floating high */
|
|
if (touched)
|
|
{
|
|
#ifdef ATA_POWER_PLAYERSTYLE
|
|
or_b(0x10, &PBIORL); /* PB4 is an output */
|
|
PBCR2 &= ~0x0300; /* GPIO for PB4 */
|
|
#else
|
|
or_b(0x20, &PAIORL); /* PA5 is an output */
|
|
PACR2 &= 0xFBFF; /* GPIO for PA5 */
|
|
#endif
|
|
}
|
|
#endif /* SH1 based archos */
|
|
}
|
|
|
|
|
|
bool ide_powered(void)
|
|
{
|
|
#if defined(TOSHIBA_GIGABEAT_F)
|
|
return false;
|
|
#else /* SH1 based archos */
|
|
#if defined(NEEDS_ATA_POWER_ON) || defined(HAVE_ATA_POWER_OFF)
|
|
#ifdef ATA_POWER_PLAYERSTYLE
|
|
/* This is not correct for very old players, since these are unable to
|
|
* control hd power. However, driving the pin doesn't hurt, because it
|
|
* is not connected anywhere */
|
|
if ((PBCR2 & 0x0300) || !(PBIORL & 0x10)) /* not configured for output */
|
|
return false; /* would be floating low, disk off */
|
|
else
|
|
return (PBDRL & 0x10) != 0;
|
|
#else /* !ATA_POWER_PLAYERSTYLE */
|
|
if ((PACR2 & 0x0400) || !(PAIORL & 0x20)) /* not configured for output */
|
|
return true; /* would be floating high, disk on */
|
|
else
|
|
return (PADRL & 0x20) != 0;
|
|
#endif /* !ATA_POWER_PLAYERSTYLE */
|
|
#else /* !defined(NEEDS_ATA_POWER_ON) && !defined(HAVE_ATA_POWER_OFF) */
|
|
return true; /* pretend always powered if not controlable */
|
|
#endif
|
|
#endif
|
|
}
|
|
#endif /* !HAVE_MMC */
|
|
|
|
|
|
void power_off(void)
|
|
{
|
|
set_irq_level(HIGHEST_IRQ_LEVEL);
|
|
#if defined(TOSHIBA_GIGABEAT_F)
|
|
/* FIXME: Can we turn the device off, or only enter sleep mode? */
|
|
#else
|
|
#ifdef HAVE_POWEROFF_ON_PBDR
|
|
and_b(~0x10, &PBDRL);
|
|
or_b(0x10, &PBIORL);
|
|
#elif defined(HAVE_POWEROFF_ON_PB5)
|
|
and_b(~0x20, &PBDRL);
|
|
or_b(0x20, &PBIORL);
|
|
#else
|
|
/* Disable the backlight */
|
|
and_b(~0x40, &PAIORH);
|
|
|
|
and_b(~0x08, &PADRH);
|
|
or_b(0x08, &PAIORH);
|
|
#endif
|
|
#endif
|
|
while(1)
|
|
yield();
|
|
}
|
|
|
|
#else
|
|
|
|
bool charger_inserted(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
void charger_enable(bool on)
|
|
{
|
|
(void)on;
|
|
}
|
|
|
|
void power_off(void)
|
|
{
|
|
}
|
|
|
|
void ide_power_enable(bool on)
|
|
{
|
|
(void)on;
|
|
}
|
|
|
|
#ifdef HAVE_SPDIF_POWER
|
|
void spdif_power_enable(bool on)
|
|
{
|
|
(void)on;
|
|
}
|
|
#endif
|
|
|
|
#endif /* SIMULATOR */
|